Heat efficiency of staggered bundles with different forms of tubes

Authors

  • Євген Миколайович Письменний National technical university of Ukraine "Kiev Polytechnic Institute" Pobedy ave, 37, Kiev, Ukraine 03056, Ukraine
  • Вадим Анатолійович Кондратюк National technical university of Ukraine "Kiev Polytechnic Institute" Pobedy ave, 37, Kiev, Ukraine 03056, Ukraine
  • Олександр Михайлович Терех National technical university of Ukraine "Kiev Polytechnic Institute" Pobedy ave, 37, Kiev, Ukraine 03056, Ukraine
  • Олександр Ігоревич Руденко National technical university of Ukraine "Kiev Polytechnic Institute" Pobedy ave, 37, Kiev, Ukraine 03056, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.4612

Keywords:

tube, flat-oval, bundle, effectiveness.

Abstract

The article represents the results of comparison of the heating-aerodynamical effectiveness of bundles with flat-oval, teardrop and circular profiles of tubes. The methodology of thermal effectiveness estimation of different types of surfaces is based on the variant heating-aerodynamical calculations of specific heat exchange apparatus – economizer-utilizer, fixed next to the boiler and assigned to preheat return heating-system water by low-potential heat of exhaust gases. Conducted variant heating-aerodynamical calculations of water economizer for six bundles of tubes of different profiles showed relatively high heating-aerodynamical mass-overall characteristics of the surfaces of flat-oval tubes. It was determined that the main advantage of non-circular cross-section tubes in comparison with circular profile tubes is their low aerodynamic resistance. The results of this work can serve as a basis for further research connected with the dimensional optimization of tubes of given profile for different heat exchange equipment.

Author Biographies

Євген Миколайович Письменний, National technical university of Ukraine "Kiev Polytechnic Institute" Pobedy ave, 37, Kiev, Ukraine 03056

Doctor of technical science, professor

Chief of chair of nuclear power plants and engineering thermophysics

Вадим Анатолійович Кондратюк, National technical university of Ukraine "Kiev Polytechnic Institute" Pobedy ave, 37, Kiev, Ukraine 03056

Post graduate student

Chair of nuclear power plants and engineering thermophysics

Олександр Михайлович Терех, National technical university of Ukraine "Kiev Polytechnic Institute" Pobedy ave, 37, Kiev, Ukraine 03056

PhD, Senior Researcher

Chair of nuclear power plants and engineering thermophysics

Олександр Ігоревич Руденко, National technical university of Ukraine "Kiev Polytechnic Institute" Pobedy ave, 37, Kiev, Ukraine 03056

PhD, associate professor

Chair of economy and enterprises

References

  1. Письменный, Е.Н. Конвективный теплообмен поперечно-омываемых шахматных пакетов плоско-овальных труб [Текст] / Е.Н. Письменный, В.А. Кондратюк, Ю.В. Жукова, А.М. Терех// Восточно-европейский журнал передовых технологий. – 2011. - №2/8 (50). – С. 4-8.
  2. Кондратюк, В.А. Теплообмен и аэродинамическое сопротивление шахматных пакетов плоско-овальных труб/ В.А. Кондратюк, Е.Н. Письменный, А.М. Терех, А.И. Руденко, Ю.В. Жукова// Современная наука; исследования, идеи, результаты, технологии (сборник научных статей). – 2011. – №2 (7). – С. 5-9.
  3. Антуфьев, В.М. Эффективность различных форм конвективных поверхностей нагрева/ В.М. Антуфьев. – М. Л.:Энергия, 1966. – 184 с.
  4. Кутателадзе, С.С. Теплопередача и гидродинамическое сопротивление: Справочное пособие/ С.С. Кутателадзе. – М.: Энергоатомиздат, 1990. – 368 с.
  5. Аэродинамический расчет котельных установок (нормативный метод)/ под ред. С.И.Мочана. – Изд.3-е. Л.: Энергия, 1977. – 256 с.
  6. Тепловой расчет котельных агрегатов (нормативный метод)/под ред. Н.В. Кузнецова, В.В. Митора, И.Е. Дубовского, Э.С. Карасиной. – Изд. 2-е. М.: Энергия, 1973. – 296 с.

Published

2012-10-09

How to Cite

Письменний, Є. М., Кондратюк, В. А., Терех, О. М., & Руденко, О. І. (2012). Heat efficiency of staggered bundles with different forms of tubes. Eastern-European Journal of Enterprise Technologies, 5(8(59), 40–42. https://doi.org/10.15587/1729-4061.2012.4612

Issue

Section

Energy-saving technologies and equipment