Comparative analysis of linearized systems of anisochronous variable-frequency drives by means of structural models
DOI:
https://doi.org/10.15587/1729-4061.2012.4613Keywords:
electric drive, designing, linearization.Abstract
The wide application of anisochronous variable-frequency driver for machinery in all fields of national economy at present resulted in the unseen before complete block diagram for this type of the drive in the literary sources in the field of study of electric drive.Diagram 1. It is universal, as the parameters of winding of anisochronous motor are not taken into account.
Diagram 2. The advantage is the accounting of the parameters of a specific anisochronous machine. In addition, the version with the PID loop of speed corresponds completely to the definition of the actual frequency transformers and provides high accuracy of development of the required speed diagram. The comparative disadvantage is small overshoots in the moment curve. If these overshoots do not exceed permissible limits, such diagram may be considered as the basic one.
Diagram 3. Corresponds to the classic scheme of the systems with subordinate control and has the best dynamic indices regardless of the speed regulator type. If the results are to be used in practice, one should take into account, that the frequency transformer with the PID loop is commonly used as the transformers with the finished system of subordinate control are made in small number.
References
- Герман-Галкин С.Г. Matlab & Simulink. Проектирование мехатронных систем на ПК. – СПб. : КОРОНА-Век, 2008. – 368 с.
- Терехов В.М. Системы управления электроприводов : учебник для студ. высш. учеб. заведений / В.М.Терехов, О.И.Осипов ; под. ред В.М.Терехова. – М. : Издательский центр «Академия», 2008. – 304 с.
- Онищенко Г.Б. Электрический привод : учебник для студ. высш. учеб. заведений / Г.Б. Онищенко. – М. : Издательский центр «Академия», 2008. – 304 с.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 А.В. Чермалых, И.Я. Майданский, Алексей Вадимович Барышников
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.