The principles of representation and forming the types of timing signaling frames

Authors

  • Сергій Петрович Шнайдер Odessa National Academy of Telecommunications named after O.S.Popov Koval’s’ka 1, Odesa, 65029, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.4618

Keywords:

timed, signal, design, different, modeling, components.

Abstract

It covers the principles of forming the Timing Signaling Frames (TSF) using different simulation components. This kind of TSF is called the Timing Signaling Frames with Different Simulation Components (TSF with DSC). It offers an algorithm based on a numeral system with a base dependent on parameter graduation. We select the base of the numeral system that corresponds to the maximum quantity of the offered parameter states. If there is more than one parameter to vary then it is necessary to select a maximum value among the offered parameters. It offers the methods of graphical representation for TSF with DSC including two-dimensional, three-dimensional and marked two-dimensional and three-dimensional charts, which relates to combinatorial use of amplitude, frequency (optionally phase), time, signal polarization for signaling frame forming. If the mentioned parameters are involved in signal representation then it is necessary to use four-dimensional space.

Author Biography

Сергій Петрович Шнайдер, Odessa National Academy of Telecommunications named after O.S.Popov Koval’s’ka 1, Odesa, 65029

Senior lecturer in the departments «Communication networks»

References

  1. Захарченко, В.М. Синтез багатопозиційних часових кодів – К.:Техніка, 1999. – 284 с.
  2. Захарченко, М. В. Системи передавання даних. – Т.1:Завадостійке кодування:підручник [для студентів вищіх технічних навчальних закладів]/ М. В. Захарченко. – Одесса: Фенікс,2009.-448 с.

Downloads

Published

2012-10-09

How to Cite

Шнайдер, С. П. (2012). The principles of representation and forming the types of timing signaling frames. Eastern-European Journal of Enterprise Technologies, 5(9(59), 6–9. https://doi.org/10.15587/1729-4061.2012.4618

Issue

Vol. 5 No. 9(59) (2012): Information and control systems

Section

Information and controlling system

License

Copyright (c) 2014 Сергій Петрович Шнайдер

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.