Modeling of the transfer of paint under seal jet printers and plotters

Authors

  • Владимир Ильич Азаренков National Technical University "KPI" Frunze str. 21, Kharkiv, Ukraine, 61002, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.4904

Keywords:

modeling, heat and mass interchange, inkjet printing, printing.

Abstract

Based on the solution of heat and mass interchange with a moving boundary equation it is proposed a mathematical description of the evaporation process and sphere of a radius R cooling in a time of ink droplet flight from the cartridge to the paper.

Author Biography

Владимир Ильич Азаренков, National Technical University "KPI" Frunze str. 21, Kharkiv, Ukraine, 61002

Senior lecturer

Department of System Analysis and Management

References

  1. Эккерт, Э.Р. Теория тепло-и массообмена [Текст] / Э.Р. Эккерт, Р.М. Дрейк. - М.: Госэнергоиздат, 1961. – 278 с.
  2. Дульнев, Г.Н. Теплообмен в радиоэлектронной аппаратуре [Текст] / Г.Н. Дульнев, Э.М. Семяшкин. - Л.: Энергия, 1968. – 360 с.
  3. Азаренков, В.И. К вопросу разработки общего подхода к расчету нестационарных температурных полей электронных аппаратов различной геометрической формы [Текст] / В.И. Азаренков // Восточно-Европейский журнал передовых технологий. – 2005. – №5/2 (17). - С. 64 - 68.

Downloads

Published

2012-07-05

How to Cite

Азаренков, В. И. (2012). Modeling of the transfer of paint under seal jet printers and plotters. Eastern-European Journal of Enterprise Technologies, 4(4(58), 26–29. https://doi.org/10.15587/1729-4061.2012.4904

Issue

Vol. 4 No. 4(58) (2012): Mathematics and cybernetics - fundamental and applied aspects

Section

Mathematics and Cybernetics - applied aspects

License

Copyright (c) 2014 Владимир Ильич Азаренков

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.