Development of new partial steam distribution method for providing partial operating modes of powerful steam turbines

Authors

  • Андрей Викторович Русанов Institute of Problems of Mechanical Engineering A.N. Podgorny NAS, Str. Dm. Pozharsky 2/10, Kharkov, Ukraine, 61046, Ukraine
  • Анна Игоревна Косьянова A. N. Podgorny Institute for Mechanical Engineering Problems NAS of Ukraine 2/10 Dm. Pozharsky str., Kharkiv, Ukraine, 61046, Ukraine
  • Дмитрий Юрьевич Косьянов A. N. Podgorny Institute for Mechanical Engineering Problems NAS of Ukraine 2/10 Dm. Pozharsky str., Kharkiv, Ukraine, 61046, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2015.55527

Keywords:

steam turbine, control stage, radial partiality, steam distribution, spatial turbulent flow

Abstract

A new approach to the partial steam distribution - radial steam distribution was presented. On its basis, a prototype of the control compartment for steam turbine K-325-23, 5 without the surge chamber, designed to provide partial operating modes of the turbine was developed. A theoretical scheme of the control stage with radial steam admission to annular chambers was proposed. Flow visualization and integral characteristics of the developed flowing part were given, and analysis of features of the physical processes occurring in the radial steam admission was performed.

It was found that using radial partial steam distribution provides the necessary parameters of the partial operating modes of the steam turbine. Effect of radial partiality on gas-dynamic efficiency parameters appears to a greater extent in the control stage and to a substantially lesser extent in the second and third stages.

Author Biographies

Андрей Викторович Русанов, Institute of Problems of Mechanical Engineering A.N. Podgorny NAS, Str. Dm. Pozharsky 2/10, Kharkov, Ukraine, 61046

Doctor of Technical Sciences Deputy Director for Science, Department Head in hydro power machines

Анна Игоревна Косьянова, A. N. Podgorny Institute for Mechanical Engineering Problems NAS of Ukraine 2/10 Dm. Pozharsky str., Kharkiv, Ukraine, 61046

Leading engineer

Department for Bladed Machinery

Дмитрий Юрьевич Косьянов, A. N. Podgorny Institute for Mechanical Engineering Problems NAS of Ukraine 2/10 Dm. Pozharsky str., Kharkiv, Ukraine, 61046

PhD

References

  1. 1. Subbotin, V. G., Levchenko, E. V., Shvecov, V. L. (2009). Parovye turbiny OAO «Turboatom» dlja teplovyh jelektrostancij. Jenergeticheskie i teplotehnicheskie processy i oborudovanie, 3, 6−17.
  2. 2. Bojko, A. V., Usatyj, A. P., Avdeeva, E. P. (2014). Chislennoe issledovanie jeffektivnosti uravnitelnoj kamery za regulirujushhej stupenju na raznyh rezhimah raboty. Jenergeticheskie i teplotehnicheskie processy i oborudovanie, 1(1044), 6−11.
  3. 3. Bohn, D. E.,Funke, H. H.-W. (2003). Experimental investigations into the non-uniform flow in a 4-stage turbine with special focus on the flow equalization in the first turbine stage. Proc. of ACME Turbo Expo 2003. Power for Land, Sea, and Air, 1–9.doi: 10.1115/gt2003-38547
  4. 4. Fridh, J. (2012). Experimental investigation of performance, flow interactions and rotor forcing in axial partial admission turbines. Royal Institute of Technology.
  5. 5. Narmin, B. H. (2010). Numerical analysis of partial admission in axial turbines. KTH Industrial Engineering and Management. Stockholm, Sweden.
  6. 6. Babaev, A. I., Goloshhapov, V. N. (2015). Primenenie kombinirovannoj programmy regulirovanija dlja turboustanovok bolshoj moshhnosti s soplovym paroraspredeleniem. Jenergeticheskie i teplotehnicheskie processy i oborudovanie, 17 (1126), 75−80.
  7. 7. Moroz, L., Frolov, B., Guriev, O. (2014). Analysis and Optimization of Partial Admission Stages. The Asian Congress on Gas Turbines.
  8. 8. Bojko, A. V., Govorushhenko, Ju. N., Usatyj, A. P., Avdeeva, E. P. (2012). Ocenka vlijanija mezhvencovogo zazora na jeffektivnost regulirujushhej stupeni na peremennom rezhime. Jenergeticheskie i teplotehnicheskie processy i oborudovanie, 7, 49−53.
  9. 9. Birjukov, A. V., Golushko, A. N., Osipov, A. V. (2010). Povyshenie jeffektivnosti raboty parcialnogo otseka parovoj turbiny s ispolzovaniem fizicheskogo i chislennogo modelirovanija. Nauchno-tehnicheskie vedomosti SPbGPU, 3, 40–45.
  10. 10. Gogolev, G. I., Drokonov, A. M., Tarasov, V. V. (1983). Harakteristiki dvuhstupenchatogo otseka i ego vtoroj stupeni pri parcialnom vpuske pervoj stupeni. Teplojenergetika, 6, 24–26.
  11. 11. Rusanov, A. V., Levchenko, E. V., Shvecov, V. L., Kosianova, A. I. (2010). Povyshenie jeffektivnosti raboty 2-j stupeni CVD turbiny K-325-23,5 pri neraschetnyh uglah obtekanija potoka. Jenergeticheskie i teplotehnicheskie processy i oborudovanie, 3, 12−18.
  12. 12. Zarjankin, A. E., Arianov, S. V., Zarjankin, V. A., Paramonov, A. N., Fichorjak, O. M. (2007). Ispolzovanie perforirovannyh jekranov v kamere re-gulirujushhej stupeni parovoj turbiny s soplovym paroraspredelitelem. Tjazheloe mashinostroenie, 1, 10−15.
  13. 13. Kim, H., Lee, H., Kim, D., Bose, S. T., Philips D. A. (2014). Prediction of unsteady loading on a steam turbine blade. Center for Turbulence Research.Proceedings of the Summer Program, 479–487.
  14. 14. Rusanov, A. V., Pashhenko, N. V., Kosianova, A. I. (2009). Metod analiticheskogo profilirovanija lopatochnyh vencov protochnyh chastej osevyh turbin. Eastern-European Journal of Enteprise Technologies, 2/7(38), 32–37.
  15. 15. Rusanov, A. V., Kosianova, A. I., Kosianov, D. Ju. (2014). Issledovanie struktury potoka v regulirujushhem otseke CVD parovoj turbiny K-325-23,5. Nauchn.-tehn. zhurnal «Vestnik dvigatelestroenija», 2, 90−95.
  16. 16. Rusanov, A. V., Kosianova, A. I., Kosianov, D. Ju. (2015). Issledovanie struktury potoka v regulirujushhem otseke CVD parovoj turbiny K-325-23,5 na rezhime parcialnosti 0.4. Nauchn.-tehn. zhurnal «Vestnik dvigatelestroenija», 9/126, 75–80.

Downloads

Published

2015-12-25

How to Cite

Русанов, А. В., Косьянова, А. И., & Косьянов, Д. Ю. (2015). Development of new partial steam distribution method for providing partial operating modes of powerful steam turbines. Eastern-European Journal of Enterprise Technologies, 6(8(78), 24–28. https://doi.org/10.15587/1729-4061.2015.55527

Issue

Vol. 6 No. 8(78) (2015): Energy-saving technologies and equipment

Section

Energy-saving technologies and equipment

License

Copyright (c) 2015 Андрей Викторович Русанов, Анна Игоревна Косьянова, Дмитрий Юрьевич Косьянов

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.