Effect of fillers based on calcium hydro hardening process of lime composites

Authors

  • Валентина Іванівна Логаніна Penza State University of Architecture and Construction Street. G.Titova, 28, Penza, Russia, 440028, Russian Federation

DOI:

https://doi.org/10.15587/1729-4061.2012.5579

Keywords:

Lime composite, filler based on calcium silicate, thermal analysis, structure

Abstract

The information about the laws of hardening of the lime-filled composites based on calcium hydro are given. According to DTA, chemical and physico-mechanical studies have established the chemical interaction of fillers based on calcium hydro with lime. The acceleration of hardening of lime composites and hardening of the structure of the lime composites is shown

Author Biography

Валентина Іванівна Логаніна, Penza State University of Architecture and Construction Street. G.Titova, 28, Penza, Russia, 440028

Doctor of Technical Sciences, Professor, Head of Department

Department of Standardization, Certification and Quality Audit

References

  1. Логанина В.И.,Макарова Л.В., Папшева К.А.Влияние технологии синтеза силикатных наполнителей на свойства известковых и отделочных составов //Региональная архитектура и строительство,2011,№ 2,
  2. Логанина В.И.,Макарова Л.В.,Сергеева К.А. Применение добавки на основе гидросиликатов кальция для сухих строительных смесях//Сухие строительные смеси.2012,№1,С.16-18

Downloads

Published

2012-12-13

How to Cite

Логаніна, В. І. (2012). Effect of fillers based on calcium hydro hardening process of lime composites. Eastern-European Journal of Enterprise Technologies, 4(5(58), 30–33. https://doi.org/10.15587/1729-4061.2012.5579

Issue

Vol. 4 No. 5(58) (2012): The applied physics and materials technology

Section

Applied physics

License

Copyright (c) 2014 Валентина Іванівна Логаніна

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.