Reasons forming the riftsfoundry rig and measure of their removal

Authors

  • Тетяна Леонідівна Триньова

DOI:

https://doi.org/10.15587/1729-4061.2012.5580

Keywords:

Technology quick prototyping (Rapid Prototyping), composite materials - CМ, rifts to thermal weariness

Abstract

The mechanism of the splits forming of termal weariness of foundry  gear materials is given. Measures of the prevention of the wear-out of the foundry gear are shown. Conclusion is made about efficiency of the using CМ for fabrication foundry gear element and introduction new technology in foundry production such as technologies quick prototyping

Author Biography

Тетяна Леонідівна Триньова

Ph.D., Chief Designer

References

  1. Петриченко А.М. Теория и технология кокильного литья. Киев, Техника,
  2. -250 с.
  3. Вейник А.И. Кокиль. Минск. «Наука и техника», 1972. -352 с.
  4. Петриченко А.М., Скобло Т.С., Скобло Ю.С. О причинах разрушения кокилей.- Известия вузов. Черная металлургия, 1975. № 5. -с. 137-140.
  5. Петриченко А.М. Практика литья в металлические формы. Киев - М., Машгиз, 1952. -167 с.
  6. Тимофеев Г.И., Светлов П.Н. Конструкции и работоспособность кокилей при мелкосерийном производстве отливок // Литейное производство. - 2001. № 2. - С. 19.
  7. Соболев В.П., Горов В.И. Термическая усталость и термический удар. - М., Машиностроение, 1970. -156 с.
  8. Павлов Е.А., Руковишникова А.П., Бокова Л.С. О материалах пресс-форм для литья под давлением Сб.: «Получение и свойства проката из металлических порошков», Горький, изд. Горьковского политехнического института, 1972. том ХХVIII, вып. 8.
  9. Структура и свойства композиционных материалов. / Ред. К.И. Портной, С.Е. Салибеков, И.Л.Светлов, В.М.Чубаров. М., Машиностроение, 1979. - 256 с.
  10. Тучинский Л.И. Композиционные материалы, получаемые методом пропитки. -М.: Металлургия, 1986. -208 с.
  11. Джонс В.Д. Прессование и спекание, перевод с англ. М., Мир, 1965. - 404 с.
  12. Айзенкольб Ф. Порошковая металлургия. М., Металлургиздат, 1959. - 518 с
  13. Белов С.В. Пористые материалы в машиностроении. М., Машинострое-ние,1981. - 248 с.
  14. Износостойкость композиционных материалов на медной основе с Fe-Cu содержащими наполнителями. Тольятти, издательство ТОЛГУ, 2003. -3 с.
  15. Варичева А.Г. Влияние соотношения компонентов в порошковой смеси Fe-Cu на линейную и объёмную усадку при спекании // Технология металлов. - 2004. № 3. - С. 46-47.

Downloads

Published

2012-12-13

How to Cite

Триньова, Т. Л. (2012). Reasons forming the riftsfoundry rig and measure of their removal. Eastern-European Journal of Enterprise Technologies, 4(5(58), 33–36. https://doi.org/10.15587/1729-4061.2012.5580

Issue

Vol. 4 No. 5(58) (2012): The applied physics and materials technology

Section

Applied physics

License

Copyright (c) 2014 Тетяна Леонідівна Триньова

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.