Theoretical framework of metallized colloidal solution structure

Authors

  • А. С. Морозов Technical University "Kyiv Polytechnic Institute" Str. Yangelya, 1/37, Kyiv, Ukraine, 03056, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.5581

Keywords:

Metallic component, hydrodynamic interaction, printing paints, polymerization, shaving

Abstract

The question for regulation of process formation structure of polymer   printing with metallic component of shaving waste is affected

Author Biography

А. С. Морозов, Technical University "Kyiv Polytechnic Institute" Str. Yangelya, 1/37, Kyiv, Ukraine, 03056

Ph.D., assistant professor of printing production department

References

  1. Морозов, А.С. Особливості переробки металевих відходів і використаних поліграфічних матеріалів [Текст] А.С.Морозов// Технологія і техніка друкарства. -№4. - 2011. - С.61-67.
  2. Морозов, А.С. Стабілізація металізованих колоїдних розчинів поліграфічного призначення [Текст] А.С.Морозов// Технологія і техніка друкарства. -№1 -2008. - С.110-117.
  3. Киричок, П.О. Особливості застосування металізованих фарбових плівок поліграфічного призначення [Текст] П.О.Киричок, Т.А.Роїк, А.С.Морозов, К.І.Савченко// Наукові вісті НТУУ”КПІ”.-№4. - 2008. - С.94-98.
  4. Патент на корисну модель № 68391”Металізована фарбова плівка” 26.03.2012. Україна/ А.С.Морозов.
  5. Морозов, А.С. Адсорбційна рівновага водяних парів при акліматизації паперу [Текст] А.С.Морозов// Технологія і техніка друкарства. -2011. - С.149-150.
  6. Воронов, С.А.Физическое материаловедение [Текст] / С.А.Воронов, Л.П. Переверзнева, Ю.М.Поплавко. Часть 1. Перспек- тивные направления материаловедения. К.: НТУУ”КПИ”, 2004.-195с.
  7. Киричок, П.О. Метали і композиційні матеріали в поліграфії [Текст] / П.О.Киричок, Т.А.Роїк, А.С.Морозов/ Навчальний посібник. К.:НТУУ “КПІ”, 2011. - 216 с.

Downloads

Published

2012-12-13

How to Cite

Морозов, А. С. (2012). Theoretical framework of metallized colloidal solution structure. Eastern-European Journal of Enterprise Technologies, 4(5(58), 36–40. https://doi.org/10.15587/1729-4061.2012.5581

Issue

Vol. 4 No. 5(58) (2012): The applied physics and materials technology

Section

Applied physics

License

Copyright (c) 2014 А. С. Морозов

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.