Increasing of abrasive and shock-abrasive wear resistance of steel 110G13L for the account of metastable austenite

Authors

  • Леонід Соломонович Малінов Pryazovskyi state technical university (PSTU), vul. Universytets’ka 7, Mariupol, Donetsk region., Ukraine, 87500, Ukraine
  • Наталя Аркадіївна Солідор Pryazovskyi state technical university (PSTU), vul. Universytets’ka 7, Mariupol, Donetsk region., Ukraine, 87500, Ukraine
  • Вадим Олександрович Мілентьєв Pryazovskyi state technical university (PSTU), vul. Universytets’ka 7, Mariupol, Donetsk region., Ukraine, 87500, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.5714

Keywords:

austenite, heat treatment, deformation martensite

Abstract

Despite the large amount of data in the literature concerning the effect of heat treatment modes on the properties of steel 110G13L, little attention has been paid to the differentiation of their choice taking into account the specific conditions of wear-and-tear. In this connection, the topical problem is the increasing of wear resistance of high-manganese steel 110G13L in different conditions  of abrasive effect for the account of the metastable state and implementation of dynamic deformative martensite transformation during the operation, which will improve the operational resistance of parts and reduce the cost of repairs. On the basis of these studies the necessity of a differentiated approach to the selection of the heat treatment of Hadfield steel, depending on the conditions of wear-and-tear is justified. The research results can be used to increase the durability of high-wear details from high-manganese steels at metallurgical enterprises of Metinvest Group

Author Biographies

Леонід Соломонович Малінов, Pryazovskyi state technical university (PSTU), vul. Universytets’ka 7, Mariupol, Donetsk region., Ukraine, 87500

Dsc (Engineering), Professor, Head of the department

Department «Materials»

Наталя Аркадіївна Солідор, Pryazovskyi state technical university (PSTU), vul. Universytets’ka 7, Mariupol, Donetsk region., Ukraine, 87500

Ph.D., docent

Department «Materials»

Вадим Олександрович Мілентьєв, Pryazovskyi state technical university (PSTU), vul. Universytets’ka 7, Mariupol, Donetsk region., Ukraine, 87500

Competitor

Department «Materials»

References

  1. Новомейский Ю.Д. Свойства и применение комплекснолегированных высокомарганцовистых сталей [Текст]/ Ю.Д. Новомейский, Ю.А. Евтюшкин, В.И. Лившиц. – М. : НИИинформтяжмаш, 1970. – 68 с.
  2. Зимокос Г.Н. Влияние химического состава на свойства высокомарганцевой стали в отливках броней конусных дробилок [ Текст]/ Г.Н. Зимокос, Л.А. Адаменко, Л.Х. Иванова // Металлургическая и горнорудная промышленность. – 2011. - № 4. – С. 39-42.
  3. Парфенов Л.И. Влияние термообработки на распределение механических свойств по сечению отливок из стали Г13Л [Текст] / Л.И. Парфенов, Г.А. Сорокин, О.Г. Таранов // Литейное производство. – 1969. – № 3. – С. 32–33.
  4. Кондратюк С.Е. Определение режима термической обработки стали 110Г13Л для повышения абразивной износостойкости [Текст] / С.Е. Кондратюк, Г.Г. Луценко // Металловедение и термическая обработка металлов. – 1985. – № 8. – С. 54–56.
  5. Малинов Л.С. Экономнолегированные сплавы с мартенситными превращениями и упрочняющие технологии [Текст] / Л.С. Малинов, В.Л. Малинов. – Х. : ННЦ ХФТИ, 2007. – 352 с.

Downloads

Published

2012-12-17

How to Cite

Малінов, Л. С., Солідор, Н. А., & Мілентьєв, В. О. (2012). Increasing of abrasive and shock-abrasive wear resistance of steel 110G13L for the account of metastable austenite. Eastern-European Journal of Enterprise Technologies, 6(5(60), 21–24. https://doi.org/10.15587/1729-4061.2012.5714

Issue

Vol. 6 No. 5(60) (2012): THE APPLIED PHYSICS AND MATERIALS TECHNOLOGY

Section

Applied physics

License

Copyright (c) 2014 Леонід Соломонович Малінов, Наталя Аркадіївна Солідор, Вадим Олександрович Мілентьєв

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.