Flow patterns of basic operating modes of oscillating heat pipes

Authors

  • Євгеній Сергійович Алексеїк National Technical University "Kyiv Polytechnic Institute" Peremogy av. 37, Kyiv, Ukraine, 03056, Ukraine
  • Володимир Юрійович Кравець National Technical University "Kyiv Polytechnic Institute" Peremogy av. 37, Kyiv, Ukraine, 03056, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.5729

Keywords:

Oscillating heat pipe, visualization, flow patterns

Abstract

The results of visualization of closed loop pulsating heat pipes with 1, 4, 6 8, 10 turns at different orientation in space are presented. Flow patterns of basic operating modes are described

Author Biographies

Євгеній Сергійович Алексеїк, National Technical University "Kyiv Polytechnic Institute" Peremogy av. 37, Kyiv, Ukraine, 03056

Post-graduate student

Department of nuclear power plants and engineering thermophysics

Володимир Юрійович Кравець, National Technical University "Kyiv Polytechnic Institute" Peremogy av. 37, Kyiv, Ukraine, 03056

Ph.D., Associate Professor

Department of nuclear power plants and engineering thermophysics

References

  1. Patent #4,921,041 U.S.А., F28D 15/02 Structure of a Heat Pipe [Текст] / Akachi H.; Inventor: Hisateru Akachi, Assignee: Actronics Kabushiki Kaisha – Appl. No. 207,318; Filed: Jun 15, 1988; Date of Patetnt: May 1, 1990. – 29 p.
  2. Tong B.Y., Closed-loop pulsating heat pipe [Текст] / B.Y. Tong, T.N. Wong, K.T. Ooi // Applied Thermal Engineering, 2001. – vol. 21. – P. 1845-1862.
  3. Xu J.L. High speed flow visualization of a closed loop pulsating heat pipe [Текст] / J.L. Xu, Y.X. Li, T.N. Wong // International Journal of Heat and Mass Transfer, 2005. – 48. – P. 3338–3351.
  4. Khandekar S. Closed loop pulsating heat pipes. Part B: visualization and semi-empirical modeling [Текст] / S. Khandekar, P. Charoensawan, M. Groll, P. Terdtoon // Applied Thermal Engineering, 2003. – vol. 23. – P. 2021–2033.
  5. Katpradit T. Internal flow patterns of closed-end oscillating heat pipes using non-azeotropic blend as working fluid at critical state [Текст] / T. Katpradit, A. Tewata, K. Booddachan, S. Waowaew, P. Chareonsawan // 1st International Seminar on Heat Pipes and Heat Recovery Systems. – Monash University (Malaysia), 2004.
  6. Кравец В.Ю. Влияние количества витков на теплопередающие характеристики пульсационных тепловых труб [Текст] / Кравец В.Ю., Алексеик Е.С. // Восточно-Европейский журнал передовых технологий, 2010. – №6/7. – С. 59-63.
  7. Исаченко В.П. Теплопередача [Текст] / Исаченко В.П., Осипова В.А., Сукомел А.С. – М.-Л.: Энергия, 1965.
  8. В.Ю. Кравец Исследование режимов теплообмена в пульсационной тепловой трубе [Текст] / В.Ю. Кравец, А.Н. Наумова, А.Н. Вовкогон // Технология и конструирование в электронной аппаратуре, 2010. – №1. – С. 39-43.
  9. Khandekar S. Multiple quasi-steady states in a closed loop pulsating heat pipe [Текст] / S. Khandekar, Anant Prasad Gautam, K. Pavan Sharma // International Journal of Thermal Sciences. – 2009. – 48. - P. 535–546.
  10. Д.А. Лабунцов, Аналитическое исследование процесса кипения в трубках малого диаметра [Текст] / Д.А. Лабунцов, О.П. Евдокимов, И.В. Тишин, А.Ф. Ульянов // Изв. вузов. М.: Машиностроение, 1970. – № 7. – С. 68-73.
  11. Khandekar S. Pulsating heat pipes: study on a two-phase loop [Текст] / S. Khandekar, M. Groll // 13th International Conference on Thermal Engineering and Thermogrammetry (THERMO), Budapest, Hungary. – 2003.

Downloads

Published

2012-08-20

How to Cite

Алексеїк, Є. С., & Кравець, В. Ю. (2012). Flow patterns of basic operating modes of oscillating heat pipes. Eastern-European Journal of Enterprise Technologies, 4(8(58), 36–42. https://doi.org/10.15587/1729-4061.2012.5729

Issue

Vol. 4 No. 8(58) (2012): Energy-saving technologies and equipment

Section

Energy-saving technologies and equipment

License

Copyright (c) 2014 Євгеній Сергійович Алексеїк, Володимир Юрійович Кравець

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.