Plastic deformation of metals under pressure treatment

Authors

  • Анатолий Андреевич Дудников Poltava State Agrarian Academy street. Skovorody, 1/3, Poltava, 36003, Ukraine
  • Александра Ивановна Беловод Poltava State Agrarian Academy street. Skovorody, 1/3, Poltava, 36003, Ukraine
  • Антон Александрович Келемеш Poltava State Agrarian Academy street. Skovorody, 1/3, Poltava, 36003, Ukraine
  • Александр Михайлович Погорецкий Poltava State Agrarian Academy street. Skovorody, 1/3, Poltava, 36003, Ukraine
  • Игорь Васильевич Перелит Poltava State Agrarian Academy street. Skovorody, 1/3, Poltava, 36003, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.5831

Keywords:

morphogenesis, plastic deformation, the potential energy, the rate of deformation

Abstract

The assessment questions of the metal plasticity and alloys processing and influence of different factors are considered

Author Biographies

Анатолий Андреевич Дудников, Poltava State Agrarian Academy street. Skovorody, 1/3, Poltava, 36003

Ph.D., Professor, Head of

Department of repairs of machinery and technology of construction materials

Александра Ивановна Беловод, Poltava State Agrarian Academy street. Skovorody, 1/3, Poltava, 36003

Ph.D., Associate Professor

Department of technical disciplines

Антон Александрович Келемеш, Poltava State Agrarian Academy street. Skovorody, 1/3, Poltava, 36003

Assistant

Department of repairs of machinery and technology of construction materials

Александр Михайлович Погорецкий, Poltava State Agrarian Academy street. Skovorody, 1/3, Poltava, 36003

Master

Department of repairs of machinery and technology of construction materials

Игорь Васильевич Перелит, Poltava State Agrarian Academy street. Skovorody, 1/3, Poltava, 36003

Master

Department of repairs of machinery and technology of construction materials

References

  1. Килов А.С. Обработка металлов давлением в промышленности / А.С. Килов. – Оренбург: ГОУ ОГУ, 2003. – 266с.
  2. Колмогоров В.Л. Механика обработки металлов давлением / В.Л. Колмогоров. – М.:. Металлургия, 1986. – 689с.
  3. Tschatsch H., Koth A. Metal Forming Practice: Processes – Machines – Tools. Springer, 2006. – 415p.

Downloads

Published

2012-06-01

How to Cite

Дудников, А. А., Беловод, А. И., Келемеш, А. А., Погорецкий, А. М., & Перелит, И. В. (2012). Plastic deformation of metals under pressure treatment. Eastern-European Journal of Enterprise Technologies, 3(5(57), 43–46. https://doi.org/10.15587/1729-4061.2012.5831

Issue

Vol. 3 No. 5(57) (2012): The applied physics and materials technology

Section

Applied physics

License

Copyright (c) 2014 Анатолий Андреевич Дудников, Александра Ивановна Беловод, Антон Александрович Келемеш, Александр Михайлович Погорецкий, Игорь Васильевич Перелит

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.