Modeling and control of processes of formation and quality control of electronic equipment

Authors

  • Ю. Я. Бобало Національний Університет «Львівська політехніка»вул. Ст. Бандери, 12, м. Львів, Україна, 79013, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2009.5886

Abstract

Considered the conceptual system modelingand managing the formation process and quality control of electronic equipment at the manufacturing stage. The resultsstudies and mathematical modeling of through formal stepper subsystem assurance in the technological andcontrol procedures

Author Biography

Ю. Я. Бобало, Національний Університет «Львівська політехніка»вул. Ст. Бандери, 12, м. Львів, Україна, 79013

Кандидат технічних наук, професор, ректор

References

  1. Недоступ Л.А. Оптимизация контроля, регулировки и
  2. технологической приработки приборов. – Львів: Вища
  3. школа, 1987. - 152 с.
  4. Кіселичник М.Д. Моделювання та оптимізація процесів
  5. забезпечення якості. - Львів, 2001. - 168 с.
  6. Бобало Ю.Я., Кіселичник М.Д., Недоступ Л.А. Питання
  7. теорії перетворення потоків при проведенні техноло-
  8. гічних і контрольних процедур // Вісник Держ. ун-ту
  9. “Львівська політехніка”, 1999. - № 369: Радіоелектроніка
  10. та телекомунікації. - С.172-176.
  11. Бобало Ю.Я., Кіселичник М.Д., Недоступ Л.А. Систем-
  12. ний аналіз якості виробництва прецизійної радіоелек-
  13. тронної апаратури. - Львів, 1996. - 167 с.
  14. A. Zickis. Structural Model of Electronic Device Manufacturing Process Quality // Electronics and electrical engineering. - Technologija: Kaunas, 2006. - № 5 (69) - Рp. 37-40.

Downloads

Published

2009-04-01

How to Cite

Бобало, Ю. Я. (2009). Modeling and control of processes of formation and quality control of electronic equipment. Eastern-European Journal of Enterprise Technologies, 2(3(38), 11–13. https://doi.org/10.15587/1729-4061.2009.5886

Issue

Vol. 2 No. 3(38) (2009): Control systems

Section

Control systems

License

Copyright (c) 2014 Ю. Я. Бобало

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.