Technology solder of chrome canning tin
DOI:
https://doi.org/10.15587/1729-4061.2009.5966Abstract
The technology of electro chrome soldering tin by tin solder is made. The basis of the technology is developed flux mixed with "UP-Fs-2" application is for chrome tin soldering allowed to increase the coefficient of solder spread to 2,6-3,0 (at a rate not less than 1.0 standard)References
- Girin O.B., Zakharov I.D., Ovcharenko V.I. A Substructurally Composite Chromium Electrochemical Coating Formed on a Canned-Food Steel Sheet from a Low-Concentration Solution of Hexavalent Chromium-Based Compounds //
- Journal of Metals (USA). – 2003. – V. 55. – № 11. – P.112.
- Гірін О.Б., Овчаренко В.І. Текстура та субструктура
- електрохімічних хромових покриттів на стрічках жерсті
- із сталі 08кп // Фізика і хімія твердого тіла. – 2006. – Т.
- – № 4 – С.803-808.
- Гірін О.Б., Овчаренко В.І. Наноструктура і фізико-ме-
- ханічні властивості хромових покриттів на консервній
- жерсті // Строительство, материаловедение, машино-
- строение. – 2006. – Вып. 36. – Ч. 2. – С.3-9.
- Гирин О.Б., Овчаренко В.И., Дудка А.Н. Зависимость
- механической стойкости тонких электрохимических
- хромовых покрытий консервной жести от их текстуры
- // Металознавство та термічна обробка металів. – 2007.
- – № 2. – С. 48-51.
- Гірін О.Б., Овчаренко В.І. Структура і властивості тон-
- ких хромових електропокриттів на консервній жерсті //
- Вопросы химии и химической технологии. – 2009. – № 2.
- – С.186-194.
- Виткин А.И., Парамонов В.А., Клементьев А.И. Произ-
- водство электролитически хромированной жести. – М.:
- Металлургия, 1987. – 184 с.
- Гірін О.Б., Овчаренко В.І., Захаров І.Д. Методичні аспек-
- ти дослідження тонких хромових покриттів на консерв-
- ній жерсті // Вопросы химии и химической технологии.
- – 2006. – № 4. – С.199-200.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 О. Б. Гірін, І. Д. Захаров, В. І. Овчаренко
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
