Polyamide resin for paper wet strength improvement

Authors

DOI:

https://doi.org/10.15587/1729-4061.2016.59832

Keywords:

tissue paper, paper strength, consumer properties, epichlorohydrin-modified polyamide resins

Abstract

In order to enhance consumer properties of the tissue paper, effective chemicals, namely the epichlorohydrin-modified polyamide resin of different manufacturers, are selected for paper strength improvement in dry and wet conditions. The environmentally friendly Kymene 25X-Cel resin made in the USA is characterized by the highest efficiency. Also, the given resin appeared the most economic in production. Expenditure amounted to 2 kg per ton of paper.

Fiber composition for paper production based on bleached sulphate softwood pulp – 40 %, bisulphate softwood pulp – 20 %, bleached sulphate hardwood pulp – 40 %, ground to 27–32°SR is developed. Such ratio of fiber semi-products provides the highest consumer properties of paper.

It is found that the Kymene 25X-Cel resin should be added to the paper pulp after grinding of cellulose fibers and diluted with water prior to introduction. Under these conditions, the highest efficiency of the resin is achieved.

Paper samples with different contents of the epichlorohydrin-modified polyamide Kymene 25X-Cel resin (0.2–0.8 % of absolutely dry fiber), which were compared with the paper sample made without the resin are made.

It is determined that 0.6–0.8 % of absolutely dry fiber is an effective resin content in the paper composition. It allows achieving the necessary paper strength of 9.3–9.6 % for the developed fiber composition, which provides basic operational properties of finished products.

Author Biographies

Людмила Валентинівна Андрієвська, Kyiv national university of trade and economics 19 Kyoto str. Kyiv, Ukraine, 02156

PhD, Senior Lecturer

Commodity Science and Non-Food Goods Examination

Тетяна Геннадіївна Глушкова, Kyiv national university of trade and economics 19 Kyoto str. Kyiv, Ukraine, 02156

PhD, Associate professor

Commodity Science and Non-Food Goods Examination

Леонід Андрійович Коптюх, Kyiv national university of trade and economics 19 Kyoto str. Kyiv, Ukraine, 02156

Doctor of technical sciences, Professor

Commodity Science and Non-Food Goods Examination

Світлана Сергіївна Стретович, Kyiv national university of trade and economics 19 Kyoto str. Kyiv, Ukraine, 02156

Assistant

Commodity Science and Non-Food Goods Examination

References

  1. Statistics of production paper products in Ukraine. Available at: http://ukrstat.org/uk/druk/publicat/kat_u/publ1_u.htm
  2. Andriievska, L. V., Hlushkova, T. H., Pylypenko, S. F. (2012). Otsinka yakosti paperovoi produktsii sanitarno-hihiienichnoho pryznachennia. Tovary i rynky, 1, 164–170.
  3. Frolov, M. V. (1982). Strukturnaia mekhanyka bumahy. Moscow: Lesnaia promyshlennost, 272.
  4. Lorentzen, S. W. (2000). Paper testing and process optimization. L S W Handbook, 72‑75.
  5. Glushkova, T., Andrievska, L., Barabash, S. (2010). The formation of paper quality and safety. Fasing the challenges of the future: excellence in business and commodity science: 17th IGWT Symposium, 2010 International conference on commerce, sept 21‑25. Bucharest, Romania: Academy of economic studies, 936–941.
  6. Frolov, M. V., Bondarenko, N. Yu, Dykler, M. H., Syvkyn, H. P. (1973). Bakterytsydnaia bumaha sanytarno-hyhyenycheskoho naznachenyia. Bumazhnaia promyshlennost, 10, 13.
  7. / Alan M., Joseph E., Curtis K. (2007). Method for making rolls of tissue sheets having improved properties: pat. 7166189 US, D21F 11/00. Kimberly-Clark Worldwide, Inc; № 11/274,105; Application Date 2005-11-14; Publication Date 2007-01-23.
  8. Sun, S., An, Q., Li, X., Qian, L., He, B., Xiao, H. (2010). Synergistic effects of chitosan–guanidine complexes on enhancing antimicrobial activity and wet-strength of paper. Bioresource Technology, 101 (14), 5693–5700. doi: 10.1016/j.biortech.2010.02.046
  9. Popov, S. P., Fainberh, Ye. Z. (1976). Vzaymodeistvye tseliulozy i tseliuloznykh materyalov s vodoi. Moscow: Khymyia, 192.
  10. Frolov, M. V., Horbushyn, V. A. (1977). Proyzvodstvo sanytarno-bytovykh vidov bumahi. Moscow: Lesnaia promyshlennost, 248.
  11. Barbash, V. A., Honcharenko, T. V. (2004). Vlahostoikost i zhyronepronytsaemost bumahy i kartona. Upakovka, 6, 17–19.
  12. Pratima, B. (2015). Pulp and Paper Chemicals. Chapter 3. Pulp and Paper Industry: Chemicals, 25‑273.
  13. Awada, H., Bouatmane, M., Daneault, C. (2015). High strength paper production based on esterification of thermomechanical pulp fibers in the presence of poly(vinyl alcohol). Heliyon, 1 (3), e00038. doi: 10.1016/j.heliyon.2015.e00038
  14. Hermans, M. A., Nelson, S. A., Sachs, M. W. (2013). Tissue products having a high degree of cross machine direction stretch. Pat. 20130068867 A1 US, D21H11/00. Application Date 2011-09-21; Publication Date 2013-03-21.
  15. Tiedeman, G. T., Gess, Je. M. (1989). Method and produkts for sizing paper and similar matеrials. Pat. 4857149 USA, IPC D 21 H 3/08. Publication Date 1989-08-15.
  16. Hideo O., Kiyoshi O. M. Y., Maybemi N. (1991). Sizing composition and sizing method. Pat. 5013775 USA, IPC C 08 K 5/15. Publication Date 1991-05-07.
  17. Schall, N., Riеbeting, V. (1995). New developments in sizing agents for surface applications. World Pulp and Paper Technology, 6, 139–145.
  18. Koptiukh, L. A. (2013). Materialy na osnovi paperu i kartonu dlia pakuvalnoho vyrobnytstva ta polihrafii. Kyiv: Universytet «Ukraina», 370.
  19. Fliate, D. M. (1970). Svoistva bumahy. Moscow: Lesnaia promyshlennost, 456.
  20. Pylypenko, S. (2006). Vlahoprochnost bumahy i metody ee otsenky. Bumaha i zhyzn, 3, 15‑17.
  21. Koptiukh, L. A., Vaisman, L. M., Lozovyk, M. T., Mosiichuk, M. H., Kus, M. M. (1996). Paper for packing articles with high moisture content. Pat. 10696 Ukraine, IPC D21N27/10. Ukrainskyi derzhavnyi naukovo-doslidnyi instytut tseliulozno-paperovoi promyslovosti; Firm "Bеrkеlеу trаdіng ltd". № 94076040; appl. 04.07.1994; publ. 25.12.1996, Bull. № 4, 4.
  22. Dave, A. S. (1985). Creping adhesives containing polyvinyl alcohol and cationic polyamide resins: pat. 4501640 US, D21H17/36 / Kimberly-Clark Corporation; Application Date 1983-10-18; Publication Date 1985-02-26.
  23. SanPiN 42-123-4240-86 (1986). Dopustymye kolychestva myhratsyy (DMK) khymycheskykh veshchestv, vydeliaiushchykhsia yz polymernykh y druhykh materyalov, kontaktyruiushchykh s pyshchevymy produktamy y metody ykh opredelenyia. [Effective as of 31. 12. 1986]. Moscow: Mynysterstvo zdravookhranenyia SSSR, 10.
  24. DSTU EN ISO 186:2008 (EN ISO 186:2002, IDT) (2010). Paper and board. Method of sampling to determine average quality. [Effective as of 01. 01. 2010]. Kyiv: Derzhspozhyvstandart Ukrainy, 18.
  25. GOST 13523-78 (1992). Fibre semi-finished products, paper and board. Method for conditioning of samples. [Effective as of 01. 01. 1980]. Moscow: Izdatelstvo standartov, 8.
  26. DSTU 2297-93 (1996). Fibre intermediate products paper and boad. Method for determination of grammage. [Effective as of 01. 01. 1996]. Kyiv: Derzhspozhyvstandart Ukrainy, 19.
  27. DSTU 2334-94 (GOST ISO 1924/1-96) (1997). Paper and cardboard. Determination of strength during stretching. Part 1. The method of loading with constant speed. [Effective as of 01. 01. 1998]. Kyiv: Derzhspozhyvstandart Ukrainy, 10.
  28. DSTU ISO 3781:2005 (ISO 3781:1983, IDT) (2006). Paper and board. Determination of tensile strength after immersion in water. [Effective as of 01. 07. 2006]. Kyiv: Derzhspozhyvstandart Ukrainy, 12.
  29. TU U 17.1-05509659-033:2013 (2013). Tekhnichni umovy na vyrobnytstvo paperu dlia vyrobiv sanitarno-hihiienichnoho pryznachennia z tseliulozy marky SH. Obukhiv: Kyivskyi kartonno-paperovyi kombinat, 15.

Downloads

Published

2016-02-15

How to Cite

Андрієвська, Л. В., Глушкова, Т. Г., Коптюх, Л. А., & Стретович, С. С. (2016). Polyamide resin for paper wet strength improvement. Eastern-European Journal of Enterprise Technologies, 1(5(79), 31–38. https://doi.org/10.15587/1729-4061.2016.59832

Issue

Vol. 1 No. 5(79) (2016): Applied physics. Materials Science

Section

Materials Science

License

Copyright (c) 2016 Людмила Валентинівна Андрієвська, Тетяна Геннадіївна Глушкова, Леонід Андрійович Коптюх, Світлана Сергіївна Стретович

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.