Examining the effect of triboelectric phenomena on wear-friction properties of metal-polymeric frictional couples
DOI:
https://doi.org/10.15587/1729-4061.2017.91615Keywords:
metal-polymeric frictional couples, drum-shoe brake, disc brake, tribosystem, triboelectric processesAbstract
The influence of triboelectric phenomena on the wear-friction properties of microasperities contacts of friction couples of drum – shoe brakes was explored. As a result of the conducted research into the wear-friction properties of metal-polymeric frictional couples of braking devices under laboratory and operational conditions at the nano-, micro- and millilevel during triboelectric interaction, the regularities of changes were established:
– of magnitudes of the contact difference of potentials of frictional couples "grey cast iron – polymers" of the drum-shoe brake on the surface temperature of linings and specific loads;
– of circulating thermal and tribocurrents on the time of friction interaction of frictional couples "cast iron – polymers" and "steel – polymers" at different sliding velocities;
– of generated tribocurrents in the contact of two-layered structures "steel – polymer" and circulating tribocurrents through the three-layered structure "steel – polymer – steel" on the surface temperatures.
References
- Sorokatyi, R. V., Dykha, A. V. (2015). Analysis of processes of tribodamages under the conditions of high-speed friction. Journal of Friction and Wear, 36 (5), 422–428. doi: 10.3103/s106836661505013x
- Al-quraan Tareq, M., Mnatsakanov, R., Mikosyanchik, O., Khimko, M. (2015). Evaluation Of Effectivness The Breaking-In Of Friction Pair In The Non-Stationary Work Conditions. Aust. J. Basic & Appl. Sci., 9 (33), 301–307.
- Shatskyi, I. P., Ropyak, L. Y., Makoviichuk, M. V. (2016). Strength Optimization of a Two-Layer Coating for the Particular Local Loading Conditions. Strength of Materials, 48 (5), 726–730. doi: 10.1007/s11223-016-9817-5
- Dreus, A. Yu., Kozhevnikov, A. A., Sudakov, A. K., Vakhalin, Yu. N. (2016). Study on thermal strength reduction of rock formation in the diamond core drilling process using pulse flushing mode. Naukovyy visnyk Natsional'noho Hirnychoho Unyversytetu, 3, 5–10.
- Krawczyk, K., E. Nowiński, A. Chojnacka (2011). Możliwości sterowania siłą tarcia za pomocą prądu elektrycznego przepływającego przez strefę tarcia. Tribologia: tarcie, zużycie, smarowanie, 2, 61–70.
- Chang, Y.-P., Yur, J.-P., Chou, H.-M., Chu, H.-M. (2006). Tribo-electrification mechanisms for self-mated carbon steels in dry severe wear process. Wear, 260 (11-12), 1209–1216. doi: 10.1016/j.wear.2005.09.001
- Janahmadov, A. K., Volchenko, A. I., Javadov, M. Y., Volchenko, D. A., Volchenko, N. A., Janahmadov, E. A. (2014). The characteristic analysis of changes in the processes, phenomena and effects within working layers of metal polymer pairs during electro-thermo-mechanical friction. Science & Applied Engineering Quarterly (SAEQ), 2, 6–17.
- Volchenko, А. I., Volchenko, N. А., Dzhavadov, M. Ya. (2014). Electro Mechanics Wear and Destruction of Brake Wheel Rims of Drilling Hoists (part 2). Problems of Friction and Wear, 3 (64), 4–17.
- Volchenko, А. I., Volchenko, N. А., Poliakov, P. А. (2011). Tribochemistry Processes and Phenomena in Superficial Layers of Brake Devices. Bulletin SevNTU, 121, 177–179.
- Mamedov, R. K. (2013). Contacts of Metal-Semiconductor with Electric Field of Spots. Baku: State University, 231.
- Galikhanov, M. F. (2009). Polymeric Composition Corona Charge Elects. Kazan, 35.
- Levykin, D. A. (2011). Mathematical Model of Electric Contact of Rough Surfaces. Software products and systems, 4, 178–180.
- Kindrachuk, M. V., Volchenko, Н. А., Volchenko, D. А. et. al. (2013). Wear of Friction Protective Straps at Contact-Impulsive Co-operation of Metal Polymer Friction Pairs of Band-Block Brake. Problems of Friction and Wear, 2, 4–19.
- Izmaylov, V. V., Novoselov, M. V. (2010). Contact of Solids and its Conductivity. Tver: university press TSTU, 112.
- Rozenbaum, V. M., Tsmchik, O. Ye. (2010). Analytical Description of Currents of Thermostimulation Polarization and Depolarization. Physics of solid, 52 (10), 2046–2051.
- Volchenko, А. І., Kindrachuk, M. V., Volchenko, D. А. et. al.; Vol'chenko, A. I. (Ed.) (2015). Tribology: Electrothermomechanic Bases, Analysis and Synthesis at Nano-, Mikro- and Millelevels and Technical Applications. Kyiv-Krasnodar, 371.
- Janahmadov, A. K., Aliev, A. M., Volchenko, А. І., Javadov, M. Y. (2013). Band-block brake with conductive cooling. SRI researcher notes "Geotechnological Problems of Oil, Gas and Chemistry". Baku, 113–119.
- Pashayev, A. M., Janahmadov, A. K., Dyshin, O. A., Javadov, M. Y. (2013). The Multi-Fractal analysis of fatigue facture under friction the process. Journal Science and applied engineering, 01, 5–20.
- Pashayev, A. M., Janahmadov, A. Kh., Javadov, N. G., Javadov, M. Y. (2013). The Multifractal analysis of the fatigue fracture under the process of friction. WTC 2013, 5th World Tribology Congress. Torino, Italy, 8–13.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2017 Sviatoslav Kryshtopa, Liudmyla Kryshtopa, Ivan Bogatchuk, Igor Prunko, Vasyl Melnyk
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
