Stability of the drill-rod of modern machines for drilling of iron notch
DOI:
https://doi.org/10.15587/1729-4061.2013.9323Keywords:
machine for drilling of iron notch, blast furnace, stability, drill-rod, critical force.Abstract
The article considers the stability of a drill rod of a machine for drilling of the blast furnace iron notch. A technique for determination of the critical effort for the drill-rod was developed, taking into account the applied torque, and the angular velocity of the instrument. The suggested approach is simple to use and provide reasonable accuracy in the calculation of the allowable pressure of the drill-rod from the side of the mechanism for moving the carriage of a machine. The article presents a graph of the critical effort for the drill-rod on the depth of penetration of drilling tools in the iron notch. Obtained dependences allow picking up the geometric characteristics of the drill-rod, holding the drill bit, at the design stage of modern machine for drilling of iron notch. The materials of the article can be used by design engineers of metallurgical equipment and students.References
- Грачев, К.Г. Об устойчивости штанги бурового инструмента машин для вскрытия чугунных леток доменных печей [Текст] / К.Г. Грачев, В.И. Пурис, А.Н. Селегей // Металлургическая и горнорудная промышленность. – 2006. – №1 – С.19-23.
- Тимошенко С.П. Устойчивость стержней, пластин и оболочек [Текст] / С.П. Тимошенко. – М.: Наука, 1971., – 808 с. с ил.
- Алымов Г.И. Эксплуатационные характеристики и надежность машин, обслуживающих чугунные летки доменных печей [Текст] / Г.И. Алымов, В.Т. Пиляев, А.Н. Селегей, С.Г. Сподин. // Металлургическая и горнорудная промышленность. – 2005. – №4. – С.9-13.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Андрей Николаевич Селегей
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.