Analysis of influence of dynamic modes of a car engine operation on the state of cylinder liners

Authors

  • Олександр Анатолійович Назаркін Ukrainian engineering and pedagogical academy Universitetskaya St., 16, Kharkov, 61003, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2013.9385

Keywords:

engine, dynamics, dynamic conditions, deformation, liner diameter, engine cylinder.

Abstract

The study of the dynamics of the crankshaft mechanism of car engines permits to establish the laws of wear of liners of engines under the influence of different conditions of operation; to improve design features of parts, mechanisms and systems of engines of loading vehicles and machines of cyclic action, which operate mostly in transient conditions.
The main purpose of the work is to analyze the conditions and dynamics of the stress state of cylinder liners of a car engine according to the operating conditions, and to identify the changes of the internal diameter of the cylinder liner along the cylinder element.
In order to determine the voltage magnitudes, which appear in the cylinder liners as a result of the influence of intense working conditions and in order to calibrate the experimental setup, the analytical calculations were carried out.
The study of the dynamics of the crankshaft mechanism of car engines helped to ascertain the regularities of wear of cylinder liners of engines under the influence of different working conditions of engine that will permit to continue the improvement of the design features of the parts, mechanisms and systems of engines, which operate in transient conditions. The studies permit to determine the order of magnitudes of deformation and the nature of their origin that allows more reasonable performance of experimental studies.

Author Biography

Олександр Анатолійович Назаркін, Ukrainian engineering and pedagogical academy Universitetskaya St., 16, Kharkov, 61003

Candidate of pedagogical sciences, associate professor

Department of the metal-cutting equipment and transport systems

References

  1. Вихтер, М. М. Конструкция и расчет автотракторных двигателей [Текст] / М. М. Вихтер, Р. П. Доброгаев. – М.: Машиностроение, 1984. – 552 с.
  2. Малмейстер, А. К. Основы теории локальной деформации [Текст] / А. К. Малмейстер // Механика полимеров, 1985. – № 4. – С. 12-27.
  3. Мельниченко, О. А., Подоляк О. С. Напружений стан гільз циліндрів при динамічних режимах роботи [Текст] / О. А. Мельниченко, О. С. Подоляк // Машинобудування: Збірник наукових праць. Вип. 1. – Харків, УІПА, 2007. – С. 58-64.
  4. Мишин, И. А. Долговечность двигателей [Текст] / И. А. Мишин. – СПб.: Машиностроение, 1996. – 288 с.
  5. Стуканов, В. А. Основы теории автомобильных двигателей и автомобиля [Текст] / В. А. Стуканов. – М.: ФОРУМ: ИНФРА-М, 2005. – 368 с.
  6. Хархута, Н. Я. Дорожные машины [Текст] / Н. Я. Хархута. – СПб.: Машиностроение, 1996. – 68 с.

Published

2013-02-05

How to Cite

Назаркін, О. А. (2013). Analysis of influence of dynamic modes of a car engine operation on the state of cylinder liners. Eastern-European Journal of Enterprise Technologies, 1(7(61), 64–67. https://doi.org/10.15587/1729-4061.2013.9385

Issue

Section

Applied mechanics