Membrane biogas purification using selective solvents
DOI:
https://doi.org/10.15587/1729-4061.2013.9486Keywords:
biogas cleaning, pervaporation, selective solvent.Abstract
Recently, the application of alternative energy resources has acquired significant interest. One of them is biogas. For many industries the production technology of biogas provides cheap disposal of organic wastes. But for its effective use the intensive purification is required. Thus, the separation of a multicomponent gas mixture, containing methane, requires the search of new ways of process implementation, for example, combination of different methods of separation. It is proposed to consider a combination of selective dissolution of methane in liquid absorber with its subsequent release, using membrane pervaporation technology.The choice of the effective selective absorber is based on the calculated dependences for determination of the conditions of equilibrium between liquid and gas phases in the process of absorption of methane and numerical modeling of solubility of the gas mixture components in absorbers. Efficiency of the absorption of methane from the gas mixture depends on the initial concentration of methane in it. To reuse the efficient selective solvent for the absorption process, it is appropriate to clean the solvent using the membrane methods.
The article considers the experimental unit for the release of methane from gas mixtures using the efficient selective solvent and pervoporation for the release of the solvent. The method of the process of membrane methane release from biogas was described. The article presents the schematic diagram of installation, maquettes of membrane, absorption and pervoporation devices with the principle of operation.
References
- Рид, Р. Свойства газов и жидкостей [Текст] / Р. Рид, Дж. Праусниц, Т. Шервуд // Пер. с англ. под ред. Б.И. Соколова. – Л.: Химия, 1982 – c. 591.
- Marerero T.R., Mason E.A. j. Psys. Chem. Ref. Data, № 1, 1972, 3.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Інеса Анатоліївна Буртна, Людмила Іванівна Ружинська, Отар Отарович Гачечіладзе, Микола Васильович Шафаренко, Михайло Михайлович Мурашко
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
