Substantiation and development of the procedure for calculating a hydraulic balancing device under condition of minimal energy losses
DOI:
https://doi.org/10.15587/1729-4061.2017.97162Keywords:
hydraulic balancing device of a pump, balancing of axial force, energy losses, face clearanceAbstract
Here we report the procedure for calculating a hydraulic balancing device from the condition of minimum of energy losses for the accepted value of static characteristic rigidity. The procedure proposed is different from those existing by that its basis is formed by a closed system of equations by the geometric parameters of a hydraulic balancing device, which is obtained from the condition of the minimum of energy losses for the accepted value of statistic characteristic rigidity. In order to determine the energy losses on the node of a hydraulic balancing device, we received calculation formulas for energy losses in the cylindrical and face chokes of a hydraulic balancing device, using an analogy of determiining the energy losses in a cylindrical pipe with round cross section. Results of the work are represented in the form of the given procedure for the calculation of a hydraulic balancing device and proposed mechanism of its realization that make it possible to obtain a unique solution of the closed system of equations for determining the geometric parameters of a hydraulic balancing device. Geometric parameters of a hydraulic balancing device, received in this way, provide for its reliable operation at minimal energy losses on it.
The verification of the procedure for calculation and the study based on the calculation procedure from the condition of the minimum of energy losses are performed using the feed pump PE 600-300 (AO "Sumy Plant "NasosEnergoMash", Ukraine). Research results might be used for calculating the nodes of axial load of the rotor of a multistage centrifugal pump under condition of the minimum of energy losses at the accepted value of static characteristic rigidity of a hydraulic balancing device. In the present work we obtained a closed system of equations for finding the geometric parameters of a hydraulic balancing device from the condition of the minimum of energy losses for the accepted statistic characteristic rigidity.
References
- Martsinkovskiy, V. A. (2009). Osnovy dinamiki rotorov. Sumy: SumGU, 307.
- Lomakin, A. (1966). Tsentrobezhnye i osevye nasosy. Moscow-Leningrad: Mashinostroenie, 364.
- Krutas', Yu. S., Kalinichenko, P. (2016). Raschet gidropyaty, obespechivayushchey minimal'nye poteri energii. Chep. 1. Suchasnі tekhnologіi u promislovomu virobnitstvі. Sumy: SumDU, 160–161.
- Chegurko, L. (1978). Razgruzochnye ustroystva pitatel'nykh nasosov teplovykh elektrostantsiy. Moscow: Energiya, 160.
- Zueva, N. (2009). Metodyka rascheta usovershenstvovannoy konstruktsyy avtomatycheskoho ustroystva osevoho uravnoveshyvanyya s upruho ustanovlennym hydravlychesky razhruzhennym vkladyshem. Visnyk Sums'koho derzhavnoho universytetu. Seriya Tekhnichni nauky, 1, 21–27.
- Kareva, E. V., Panaiotti, S. S., Savel'ev, A. I. (2009). Avtomatizirovannoe proektirovanie avtomaticheskikh ustroystv dlya uravnoveshivaniya osevykh sil v tsentrobezhnykh nasosakh. Kaluga, 40.
- Marcinkowski, W., Korczak, A., Peczkis, G. (2009). Dynamika zespoolu wirujacego pompu odsrodkowej welostopniowej z tarcza odciazajaca. Zeszyty naurowe. Nauki techniczne, 13, 245–263.
- Marcinkowski, W., Kundera, Cz. (2008). Teoria konstrukcji uszczelnien bezstykowych. Kielce: Wudwo Politechniki Swietokrzyskiej, 443.
- Korczak, A., Marcinkowski, W., Peczkis, G. (2004). Pat. No. 207968. Zespol tarczy odciazajacej sile osiowa w wirnikowej sprezarce promieniowej. F04C 2/00, F04D 29/041, F04D 29/051. No. 0000065096; declareted: 20.02.2004; published: 28.02.2011, 6.
- Kalinichenko, P. M., Suprun, A. V. (2010). Self-stabilizing seals. Russian Engineering Research, 30 (7), 689–690. doi: 10.3103/s1068798x10070087
- Kalinichenko, P., Suprun, A. (2012). Effective Modes of Axial Balancing of Centrifugal Pump Rotor. Procedia Engineering, 39, 111–118. doi: 10.1016/j.proeng.2012.07.014
- Bym-Bad, B. M., Kabanov, M. G. (2004). Atlas konstruktsyy hydromashyn y hydroperedach. Мoscow: Ynfra-M, 134.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2017 Pavlo Kalinichenko, Oleksandr Gusak, Sergey Khovanskyy, Yuliya Krutas
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
