Modernization of the technique for rotary shape-formation of outer profiled surfaces
DOI:
https://doi.org/10.15587/1729-4061.2018.148036Keywords:
profiled outer surfaces, rotating center, rotary broaching, socket headAbstract
We have proposed a technique for obtaining outer profiled surfaces, which is characterized by affordability and low cost of equipment used. The technique is based on that a regular rotating center is fixed in a lathe’s tool holder in a special way. A basic socket head of the required profile is applied as a profile-forming matrix. A tool holder’s rotation angle ensures a fracture angle of the rotating center’s axis relative to the axis of a workpiece rotation. A value for the fracture angle reaches 1.5°. The end surface edge of the matrix executes a reciprocating motion per every rotation of the lathe chuck along the surface of a workpiece. In this case, the end surface of the matrix and a workpiece are in contact at a single point, going deeper by the magnitude of feed per every rotation of the chuck.
Application of a given technique is an alternative to existing technique of rotational shape-formation of outer profiled surfaces, whose implementation requires specialized equipment and specialized cutting tools, the price for which is quite high (UAH 57,000 and UAH 6,000, respectively). In addition, changing the size or shape of the required profile necessitates installing a new cutting tool, replacing which requires additional adjustment.
The tests were carried out when manufacturing the twelve-point outer surface the size of S10. An analysis of vibrograms from the shape-formation process has established the most rational variant of equipment for manufacturing profiled outer surfaces. We have manufactured pilot outer profiled surfaces, such as hexagon the size of S10, the TORX surface the size of E14, and others. They confirmed a possibility for successful manufacturing of different profiled outer surfaces using the proposed tooling.
Using the proposed technique, which implies low cost and does not require specialized equipment, could significantly expand the scope of application of conjugated surfaces with a profiled shape in mechanical engineeringReferences
- Axinte, D., Boud, F., Penny, J., Gindy, N., Williams, D. J. (2005). Broaching of Ti-6-4 – Detection of Workpiece Surface Anomalies on Dovetail Slots through Process Monitoring. CIRP Annals, 54 (1), 87–90. doi: https://doi.org/10.1016/s0007-8506(07)60056-0
- Kong, X., Li, B., Jin, Z., Geng, W. (2011). Broaching Performance of Superalloy GH4169 Based on FEM. Journal of Materials Science & Technology, 27 (12), 1178–1184. doi: https://doi.org/10.1016/s1005-0302(12)60015-2
- Vasyliev, A. V. Popov, S. V., Datsenko, V. D. (2015). Development of the construction of the cut-off blade from circular saws. Technology audit and production reserves, 3 (1 (23)), 60–64. doi: https://doi.org/10.15587/2312-8372.2015.44396
- Klocke, F., Döbbeler, B., Seimann, M. (2016). Dry Broaching Using Carbon Free Steel as Tool Material. Procedia CIRP, 46, 496–499. doi: https://doi.org/10.1016/j.procir.2016.04.076
- Meier, H., Ninomiya, K., Dornfeld, D., Schulze, V. (2014). Hard Broaching of Case Hardened SAE 5120. Procedia CIRP, 14, 60–65. doi: https://doi.org/10.1016/j.procir.2014.03.074
- Albanskiy, P. P., Kolominov, B. V., Kuz'min, V. A., Murav'ev, V. I., Rodin, I. I., Sysoev, A. M., Harchenko, K. S. (1969). Instrument i tekhnologicheskaya osnastka dlya slesarey. Moscow: Mashinostroenie, 200.
- Vasilyev, A., Popov, S., Vasilyev, E., Pavelieva, A. (2017). Improving the method of rotational broaching in the production of profile openings on the lathes of turning group. Eastern-European Journal of Enterprise Technologies, 1 (1 (85)), 4–9. doi: https://doi.org/10.15587/1729-4061.2017.92256
- Hiegemann, L., Weddeling, C., Tekkaya, A. E. (2016). Analytical contact pressure model for predicting roughness of ball burnished surfaces. Journal of Materials Processing Technology, 232, 63–77. doi: https://doi.org/10.1016/j.jmatprotec.2016.01.024
- Kuznetsov, V. P., Tarasov, S. Y., Dmitriev, A. I. (2015). Nanostructuring burnishing and subsurface shear instability. Journal of Materials Processing Technology, 217, 327–335. doi: https://doi.org/10.1016/j.jmatprotec.2014.11.023
- Schulze, V., Zanger, F., Krauße, M., Boev, N. (2013). Simulation Approach for the Prediction of Surface Deviations Caused by Process-Machine-Interaction During Broaching. Procedia CIRP, 8, 252–257. doi: https://doi.org/10.1016/j.procir.2013.06.098
- Korzynski, M., Zarski, T. (2016). Slide diamond burnishing influence on of surface stereometric structure of an AZ91 alloy. Surface and Coatings Technology, 307, 590–595. doi: https://doi.org/10.1016/j.surfcoat.2016.09.045
- Rotary broach tooling. Available at: http://www.slatertools.com/
- Complete broaching solutions. Available at: http://www.brighettibroaching.com/
- Proshivnaya golovka BR-G16L KM4. Available at: https://dp.prom.ua/p599335846-proshivnaya-golovka-g16l;all.html
- Proshivka GL 16-E-8. Available at: https://dp.prom.ua/p599348099-proshivka;all.html
- Schroeter, R. B., Bastos, C. M., Crichigno Filho, J. M. (2007). Simulation of the main cutting force in Crankshaft turn broaching. International Journal of Machine Tools and Manufacture, 47 (12-13), 1884–1892. doi: https://doi.org/10.1016/j.ijmachtools.2007.03.008
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2018 Anatoly Vasilyev, Stanislav Popov, Ievgen Vasyliev, Andrii Shpylka, Volodimir Vovchenko
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
