Problems foundry equipping and modern ways of their decision

Authors

  • Татьяна Леонидовна Тринева ЧАО “Конструкторско-технологическое бюро верификационного моделирова-ния и подготовки производства” ул. Фрунзе, 21, г. Харьков, Украина, 61002, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.2276

Keywords:

Rapid prototyping technologies, composite materials

Abstract

General analysis of the nature of the appearance defect foundry equipping is given. The basic mechanisms of appearance and modern removal them through the introduction of rapid prototyping technologies and their content are described

Author Biography

Татьяна Леонидовна Тринева, ЧАО “Конструкторско-технологическое бюро верификационного моделирова-ния и подготовки производства” ул. Фрунзе, 21, г. Харьков, Украина, 61002

Кандидат технических наук, главный конструктор

References

  1. Скородумов С.В. Создание и развитие систем компактного интеллек-туального производства // Литейное производство. - 1999. № 7. - С. 28-33.
  2. Гейтс Б. Дорога в будущее. / Пер. с англ. - М.: Издательский отдел «Русская Редакция», ТОО «Channel Trading Ltd.», 1996. -с. 312.
  3. Трегубов Г.П. Инновационные проблемы модернизации производственной среды для рынка наукоемкой продукции // Литейное производство. - 2004. № 4. - С. 2-4.
  4. Шаюков С., Майхорн К. Международная выставка EUROMOLD-2003 (г.Франк-фурт-на-Майне) // Литейное производство. - 2004. № 4. - С. 32-34.
  5. Ищенко В.В., Федотов В.А. Настольный учебно-технический комплекс для мелкосерийного изготовления отливок // Литейное производство. - 2004. № 4. - С. 35-38.
  6. Бояринцев А.В. Проекты «АБ Универсал» в производстве литейной оснастки // Литейное производство. - 2004. № 4. - С. 22-24.
  7. Таран Б.П., Витязев Ю.Б., Тринева Т.Л. Реальное применение стереоли-тографии в литейном производстве // Процессы литья. - 2003. № 4. - С. 44-46.
  8. Таран Б.П., Тринева Т.Л. Внедрение прогрессивных технологий в литейное производство в сочетании с традиционными // Вестник НТУ «ХПИ». - 2005. № 23. - С. 181-185.
  9. Кечин В.А., Селихов Г.Ф., Афонин А.Н. Проектирование и производство литых заготовок: Учеб. пособие /Владим. гос. ун-т. Владимир, 2002. - 228 с.

Downloads

How to Cite

Тринева, Т. Л. (2012). Problems foundry equipping and modern ways of their decision. Eastern-European Journal of Enterprise Technologies, 6(5(54), 26–30. https://doi.org/10.15587/1729-4061.2011.2276

Issue

Vol. 6 No. 5(54) (2011): The applied physics and materials technology

Section

Applied physics

License

Copyright (c) 2014 Татьяна Леонидовна Тринева

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.