Devising a method to improve the accuracy of maintaining the pre-set temperature and humidity conditions at a vegetable storage facility under a food storing mode
DOI:
https://doi.org/10.15587/1729-4061.2021.229844Keywords:
control system, vegetable storage facility, temperature stabilization, microclimate, mathematical model, vegetable storageAbstract
A vegetable storage facility is an energy-consuming object with distributed parameters. The quality of product storage depends on the microclimate in the vegetable storage facility: current temperature, humidity, and carbon dioxide level. Existing temperature controllers in a vegetable storage facility use a two-position law of control, which leads to the consumption of excess energy and product spoilage.
The purpose of the study is to improve the work of the controller in the process of product storage at the storage phase due to closing the two-position controller through feedback in the form of a first-order aperiodic link.
To achieve the goal, the procedure for calculating the transfer function of a control object through the equation of thermal balance was used. This procedure made it possible to take into consideration the parameters of a vegetable storage facility: the area and the type of thermal insulation material of floorings, the weight, and the type of a stored product, as well as thermal energy supplied to the vegetable storage facility.
Based on the heat balance equation, the nature of the operation of controlling elements, transfer functions of a vegetable storage facility without a product, and the vegetable storage facility filled with a product, were calculated. The heat model of a vegetable storage facility was constructed in the MATLAB Simulink environment (USA) to check the algorithms of the temperature field control.
The product storage for 180 days with changes in the daily temperature of outdoor air from minus 8 °C to plus 2 °C and changes in humidity from 50 % to 100 % was modeled.
According to the results of modeling, it is possible to conclude that the addition of an aperiodic link to the feedback of the two-position controller will enable taking into consideration the inertia of a control object. This allows decreasing the maximum error in control of self-oscillations to 0.15 °C and decreasing the total operation time of controlling elements by 13 %
References
- Admaev, A. I. (2018). Sistema kontrolya i upravleniya mikroklimatom v ovoschehranilische. Informatsionnye tehnologii i upravlenie. Materialy 54-y nauch. konf. aspirantov, magistrantov i studentov. Minsk, 24–25. Available at: https://libeldoc.bsuir.by/bitstream/123456789/32801/1/Admayev_Sistema.pdf
- Akdemir, S., Bartzanas, T. (2015). Numerical Modelling and Experimental Validation of a Cold Store Ambient Factors. Journal of agricultural sciences, 21, 606–619. doi: https://doi.org/10.1501/tarimbil_0000001361
- Nemenuschaya, L. A., Stepanischeva, N. M., Solomatin, D. M. (2009). Sovremennye tehnologii hraneniya i pererabotki plodoovoschnoy produktsii. Moscow: FGNU «Rosinformagroteh», 172. Available at: https://rosinformagrotech.ru/data/itpk/kartofel-i-ovoshchi/send/18-kartofel-i-ovoshchi/469-sovremennye-tekhnologii-khraneniya-i-pererabotki-plodoovoshchnoj-produktsii
- Meneghetti, C. R., Tizzei, A., Cappelli, N. L., Umezu, C. K., Bezzon, G. (2013). A Mathematical model for the cold storage of agricultural products. Revista Ciência Agronômica, 44 (2), 286–293. doi: https://doi.org/10.1590/s1806-66902013000200010
- Malanchuk, Y., Khrystyuk, A., Sych, V. (2020). Problems of automation of fresh fruits and vegetables storage processes. Modeling, Control and Information Technologies, 4, 92–95. doi: https://doi.org/10.31713/mcit.2020.34
- Maltsev, S. V., Kluev, S. I., Pshechenkov, K. A. (2017). The microclimate control system in modern potato storage facilities. Zaschita kartofelya, 2, 12–17. Available at: http://www.kartofel.org/zakart/2_2017.pdf
- Yermilova, N., Kyslytsia, S., Tarasiuk, R. (2019). Development of automated control system for equipment of a vegetable storage facility based on neuro-fuzzy systems. Control, Navigation and Communication Systems, 1 (53), 50–54. doi: https://doi.org/10.26906/sunz.2019.1.050
- Tolsma. Available at: https://tolsma.com.ua/
- Mooij Agro. Available at: https://www.mooij-agro.com/en/
- Lekomtsev, P. L., Dresviannikova, E. V., Niazov, A. M., Orlov, S. V. (2017). Mathematical modeling of refrigeration using vortex tubes in vegetable stores. Engineering Journal of Don, 4. Available at: http://www.ivdon.ru/uploads/article/pdf/IVD_109_Lekomcev.pdf_24bf077381.pdf
- Timoshenko, V. A., Sutulo, A. V., Dovgan', N. B. (2017). Metody viyavleniya porokov kartofelya pri razlichnyh temperaturnyh rezhimah hraneniya i otsenka ego kachestva. The Electronic Scientific Journal, 5-1, 16–19. Available at: http://co2b.ru/docs/enj.2017.05.01.pdf
- Uzakov, G. N. (2010). Snizhenie zatrat energii v teplohladosnabzhenii kombinirovannogo sooruzheniya «ovoschehranilische-gelioteplitsa» s ispol'zovaniem teplovyh nasosov. Molodoy ucheniy, 1 (11), 73–78. Available at: https://moluch.ru/archive/22/2218/
- Alhamdan, A., Alsadon, A., Wahb-Allah, M. A., Nagar, M. E. (2011). Influence of Storage Conditions on Seed Quality and Longevity of Four Vegetable Crops. American-Eurasian Journal of Agricultural & Environmental Sciences, 11 (3), 353–359. Available at: https://www.idosi.org/aejaes/jaes11(3)11/8.pdf
- Tervonen, J. (2018). Experiment of the quality control of vegetable storage based on the Internet-of-Things. Procedia Computer Science, 130, 440–447. doi: https://doi.org/10.1016/j.procs.2018.04.065
- Zhukov, A. D., Ter-Zakaryan, K. A., Tuchaev, D. U., Petrovsky, E. S. (2018). Energy-efficient insulation of food storage rooms and vegetable stores. International Agricultural Journal, 1, 65–67. doi: https://doi.org/10.24411/2587-6740-2018-11015
- Iacomi, C., Roșca, I., Madjar, R., Iacomi, B., Popescu, V., Vărzaru, G., Sfetcu, C. (2014). Automation and computer-based technology for small vegetable farm holders. Scientific Papers. Series A. Agronomy, 57, 415–420. Available at: http://agronomyjournal.usamv.ro/pdf/2014/art74.pdf
- Kachanov, P., Yevseienko, O. (2017). Modeling of daily temperature mode in premises using a predictive controller. Eastern-European Journal of Enterprise Technologies, 4 (2 (88)), 33–41. doi: https://doi.org/10.15587/1729-4061.2017.108574
- Kun, T., Peng, X., Hong-kun, H. (2015). The application of Self-adaptive Fuzzy PID control the evaporator superheat. International Journal of Research in Engineering and Science (IJRES), 3 (42), 64–71. Available at: https://1library.net/document/ydv4xkjy-application-self-adaptive-fuzzy-pid-control-evaporator-superheat.html
- Grudinin, V. S., Khoroshavin, V. S., Zotov, A. V., Grudinin, S. V. (2019). Adaptive Iterative Control of Temperature in Greenhouse. Engineering Technologies and Systems, 29 (3), 383–395. doi: https://doi.org/10.15507/2658-4123.029.201903.383-395
- Tizzei, A., Meneghetti, C. R., Cappelli, N. L., Umezu, C. K. (2011). System for studies of control strategies applied in the refrigerated chambers. Engenharia Agrícola, 31 (5), 868–878. doi: https://doi.org/10.1590/s0100-69162011000500004
- Morimoto, T., Islam, M. P., Hatou, K. (2013). An Intelligent Control Technique for Dynamic Optimization of Temperature during Fruit Storage Process. American Journal of Operations Research, 03 (01), 207–216. doi: https://doi.org/10.4236/ajor.2013.31a020
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Петр Алексеевич Качанов, Олег Николаевич Евсеенко, Наталья Александровна Евсина
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.