Effect of number of turns on heat-transfer behavior of oscillating heat pipe

Authors

  • Владимир Юрьевич Кравец Кафедра атомных электростанций и инженерной теплофизики Теплоэнергетический факультет Национальный технический университет Украины «Киевский политехнический институт», Ukraine
  • Евгений Сергеевич Алексеик Кафедра атомных электростанций и инженерной теплофизики Теплоэнергетический факультет Национальный технический университет Украины «Киевский политехнический институт», Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2010.3370

Keywords:

oscillating heat pipe, number of turns, thermal resistance

Abstract

This article represents an overview of investigation of effect of number of turns and inclination angle on heat-transfer behavior of oscillating heat pipe. Experimental setup for investigation of this effect, a routine of experiment and data handling are described. The results of investigation are presented.

Author Biographies

Владимир Юрьевич Кравец, Кафедра атомных электростанций и инженерной теплофизики Теплоэнергетический факультет Национальный технический университет Украины «Киевский политехнический институт»

Кандидат технических наук, доцент

Евгений Сергеевич Алексеик, Кафедра атомных электростанций и инженерной теплофизики Теплоэнергетический факультет Национальный технический университет Украины «Киевский политехнический институт»

Аспирант

References

  1. Patent #4,921,041 U.S.А., F28D 15/02 Structure of a Heat Pipe / Akachi H.; Inventor: Hisateru Akachi, Assignee: Actronics Kabushiki Kaisha – Appl. No.: 207,318; Filed: Jun 15, 1988; Date of Patetnt: May 1, 1990. – 29 p.
  2. Смирнов Г.Ф., Савченков Г.А. Пульсирующая тепловая труба. - Авт. свид. №504065 кл. F28D 15/00. С приоритетом от 30.IV.1- 971г.
  3. Charoensawan P. Thermal performance of horizontal closed-loop oscillating heat pipes [Текст] / P. Terdtoon// Applied Thermal Engineering. - 2008. – vol. 28, iss. 5-6. – P. 460-466.
  4. Charoensawan P. Closed loop pulsating heat pipes. Part A: parametric experimental investigations [Текст] / S. Khandekar, M. Groll, P. Terdtoon // Applied Thermal Engineering, 2003 – vol. 23 - P. 2009–2020.
  5. Rittidech S. Correlation to predict heat transfer characteristics of a closed-end oscillating heat pipe at normal operating condition [Текст] / P. Terdtoon, M. Murakami, P. Kamonpet, W. Jompakdee // Applied Thermal Engineering. - 2003. – vol. 23. - P. 497–510.
  6. Khandekar S. Pulsating heat pipes: study on a two-phase loop [Текст] / M. Groll // 13th International Conference on Thermal Engineering and Thermogrammetry (THERMO), Budapest, Hungary, 2003.
  7. Khandekar S. Thermofluid Dynamic Study of Flat-Plate Closed-Loop Pulsating Heat Pipes [Текст] / M. Shneider, P. Shafer, R. Kulenovic , M. Groll // Microscale Thermophysical Engineering. - 2002. – №6. – P. 303-317.
  8. Khandekar S. Pulsating Heat Pipes: Thermo-fluidic Characteristics and Comparative Study with Single Phase Thermosyphon [Текст] / M. Groll, P. Charoensawan, P. Terdtoon // Proceedings of 12th International Heat Transfer Conference, Grenoble, France. - 2002. - vol. 4. - P. 459-464.
  9. S. Khandekar, N. Dollinger, M. Groll. Understanding operational regimes of closed loop pulsating heat pipes: an experimental study-[Текст] // Applied Thermal Engineering, 2003. – vol. 23. – P. 707-719.
  10. Конев С.В. Экспериментальное исследование пульсирующей капиллярной тепловой трубы [Текст] / В.А Олехнович // VI Minsk International Seminar “Heat Pipes, Heat Pumps, Refrigerators”, Minsk, Belarus, 2004.
  11. T. Hudakorn Effect of Inclination angle on heat transfer characteristic of a closed-end oscillating heat pipe at critical state [Текст] / K. Booddachan, P. Chareonsawan, S. Waowaew, S. Rittidech // 1st International Seminar on Heat Pipes and Heat Recovery Systems, Monash University, Malaysia, 2004.
  12. Lanchao Lin Thermal Management Research Studies. Volume 2: Experimental Investigation of Oscillating Heat Pipes for Actuator Cooling // Report. – AFRL-PR-WP-TR-2001-2042.
  13. Yang H. Operational limit of closed loop pulsating heat pipes [Текст] / S. Khandekar, M. Groll // Applied Thermal Engineering. - 2008. – vol. 28. – Р. 49-59.
  14. Yang H. Performance characteristics of pulsating heat pipes as integral thermal spreaders [Текст] / S. Khandekar, M. Groll // International Journal of Thermal Sciences. - 2009. – №48. - P. 815–824.
  15. Yang H. Operational characteristics of flat plate closed loop pulsating heat pipes [Текст] / S. Khandekar, M. Groll // 13th International Heat Pipe Conference, China. - 2004. - P. 283-289.
  16. Кузнецов И.О. Экспериментальное исследование и математическое моделирование теплопередающих характеристик пульсационных тепловых труб[Текст] : дис…. канд. техн. наук: 05.14.06 / И.О.Кузнецов. – Одесса, 2006.
  17. Кравец В.Ю. Исследование теплопередающих характеристик пульсационной тепловой трубы [Текст] // Тезисы докладов и сообщений. VІ Минский международный форум по тепло- и массообмену. - Т. 2. - 2008. - С. 58-60.

Downloads

Published

2010-11-10

How to Cite

Кравец, В. Ю., & Алексеик, Е. С. (2010). Effect of number of turns on heat-transfer behavior of oscillating heat pipe. Eastern-European Journal of Enterprise Technologies, 6(7(48), 59–63. https://doi.org/10.15587/1729-4061.2010.3370

Issue

Vol. 6 No. 7(48) (2010): Energy saving technologies and equipment

Section

Energy-saving technologies and equipment

License

Copyright (c) 2014 Владимир Юрьевич Кравец, Евгений Сергеевич Алексеик

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.