Fuels pelleting

Authors

  • Мирослав Степанович Мальований National University "Lviv Polytechnic" Sq. St. Yura, ¾ teach. Building 8, Lviv, Ukraine, 79013, Ukraine
  • Роман Ярославович Бать National University "Lviv Polytechnic" Sq. St. Yura, ¾ teach. Building 8, Lviv, Ukraine, 79013, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.4599

Keywords:

ecological monitoring, vulcanian method, fuel grains, wood waste, dynamic and static strength of grains, calorific power.

Abstract

The article represents the search results of optimal relationship between the amount of wood waste and a binder with a further physical mechanical studying of grains obtained. The research had two stages: the determination of grains’ properties with different relationship of a binder concerning wood waste and grain formation under the high positive pressure. The optimal relationship of wood waste and a binder (waste of pulp and paper plant) were found experimentally. The calorific power, dynamic and static capacity of the grains obtained was determined. The research show, that grains obtained by vulcanian method with addition of binder according to the dynamic and static capacity, the calorific power and energies for their formation, correspond and sometimes exceed grain indices obtained with press pelletizer.

Author Biographies

Мирослав Степанович Мальований, National University "Lviv Polytechnic" Sq. St. Yura, ¾ teach. Building 8, Lviv, Ukraine, 79013

Doctor of Technical Sciences, Professor, Head of Department

Department of Applied Ecology and balanced nature

Роман Ярославович Бать, National University "Lviv Polytechnic" Sq. St. Yura, ¾ teach. Building 8, Lviv, Ukraine, 79013

Applicant

Department of Applied Ecology and balanced nature

References

  1. Пономаренко П.И. Социально-экономические проблемы энергетики накануне нового века / Пономаренко П.И., Райхель Б.Л. // Философские, социальные и экономические проблемы современной экологии. Сборник Национальной горной академии Украины. — Днепропетровск — 1998. — С. 54—60.
  2. Гелетуха Г.Г. Обзор современных технологий сжигания древесины с целью выработки тепла и электроэнергии / Гелетуха Г.Г., Железная Т.А // Экотехнологии и ресурсосбережение. – 1998. - №6. С. 10 -18.
  3. Звіт про залишки і використання палива та паливно-мастильних матеріалів (форма №4-МТП) за 1998р./ Державний Комітети Статистики України. – Київ,2000. - С. 95;
  4. Утворення лісових відходів на Львівщині по ДЛГО “Львівліс”;
  5. Гелетуха Г.Г. Развитие биоэнергетики в Украине: состояние и перспективы. /Проблемы промышленной теплотехники / Гелетуха Г.Г. // V Международная конференция 22 – 26 мая 2007 г. – Киев. – с. 20 – 21;
  6. Прокіп А.В. Ефективність отримання енергії з деревини / Прокіп А.В. // Науковий вісник // Українського державного лісотехнічного університету. Випуск 14.1. - Львів,2004 с 181 – 184.
  7. Соуфера С. А. Биомасса как источник энергии / Соуфера С.А., Заборски О.Я. – М. : Мир, 1985. – 368с.
  8. Гелетуха Г.Г. Обзор современых технологий сжигания древесины с целью выроботки тепла и электроэнергии / Гелетуха Г.Г., Железная Т.А. // Экотехнологии и ресурсосбережение. – 1995. №5. – С. 16-18.

Downloads

Published

2012-10-09

How to Cite

Мальований, М. С., & Бать, Р. Я. (2012). Fuels pelleting. Eastern-European Journal of Enterprise Technologies, 5(8(59), 10–14. https://doi.org/10.15587/1729-4061.2012.4599

Issue

Vol. 5 No. 8(59) (2012): Energy saving technologies and equipment

Section

Energy-saving technologies and equipment

License

Copyright (c) 2014 Мирослав Степанович Мальований, Роман Ярославович Бать

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.