Simulation of extrusion molding of polymers based on the effect of wall slip
DOI:
https://doi.org/10.15587/1729-4061.2009.5931Abstract
Numerical simulation using experimental data flow of polymer melts in areas including channels provided wall slip is conducted. Some patterns of distribution of velocity and pressure, depending on the speed of wall slip are given, the feasibility of using specified boundary conditions are shownReferences
- http://www.compuplast.com
- http://www.ikv-aachen.de
- http://www.fluent.com
- http://www.moldflow.com
- http://www.polycad.co.il
- Швед Н.П. Экспериментальная установка для исследования процессов переработки термопластов на каскадном экструдере// Химическое машиностроение. Республ. межведомств. научно-техн. сб.,- Киев,- Техніка,- вып. 29, с. 24-30.
- Бондаренко В. Н., Кочеров В. Л., Лукач Ю. Е. и др. Экструзионное оборудование для получения полимерных концетратов красителей// В кн.: "Создание прогрессивного оборудования для производства химических волокон".- Тез. докл. Всесоюзной научно-техн. конференции.- ч.I.- Чернигов.- 1982.- С. 104-105.
- Жданов Ю. А., Иванова Л. А., Рябинин Д. Д. Метод определения скорости скольжения и истинной кривой течения полимеров по неинвариантным реологическим характеристикам. Химическое машиностроение. Республ. межведомств. научно-техн. сб.,- Киев,- Техніка,- вып. 18, с. 50-57.
- Сахаров О.С., Щербина В.Ю., Гондлях О.В., Сівецький В.І. САПР. Інтегрована система моделювання технологічних процесів і розрахунку обладнання хімічної промисловості – К.: ТОВ “Поліграф Консалтинг”, 2006. – 156 с.
- Теплофизические и реологические характеристики полимеров: Справочник / Пахаренко В.А., Привалко В.П., Петрушенко Е.Ф., Хмеленко Г.И., Иванова Л.А. / Под ред. Ю.С. Липатова. – К.: Наукова думка, 1977. – 244 с.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Олександр Леонідович Сокольський, Юлія Володимирівна Бурла
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.