Model reduction at synthesis of controllers for crystallization control
DOI:
https://doi.org/10.15587/1729-4061.2011.1745Keywords:
Monocrystal, Czochralski method, the synthesis controller, the reduction of the modelAbstract
The approach to the synthesis of low-order controller for the crystallization control systems based on the reduction of the model features a complementary sensitivity function by the method of approximation in Hankel norm have been proposed. This method gives higher accuracy of approximation of the reduced system
References
- Cуздаль В.С.. Сцинтилляционные монокристаллы: автоматизированное выращивание. / В.С. Cуздаль, П.Е. Стадник, Л.И. Герасимчук, Ю.М. Епифанов // Сер. Состояние и перспективы развития функцион. матер. для науки и техники. – Харьков: ИСМА, 2009.– 260 c.
- Суздаль В.С. Параметрическая идентификация VARMAX моделей процесса кристаллизации крупногабаритных монокристаллов / В.С. Суздаль, Ю. М. Епифанов, А.В. Соболев, И.И. Тавровский // Нові технології. Науковий вісник Кременчуцького університету економіки, інформаційних технологій і управління. – 2009. – №4(26). – С. 23–29.
- Tan W. PID tuning based on loop-shaping control / Tan W.; Liu J.Z., Tarn P.K.S. / IEE Proceedings on Control and Applications – 1998, Vol. 145. – P. 485–490.
- Mcfarlane D.C. Loop Shaping Design Procedure Using Synthesis / Mcfarlane D.C. Glover K. // IEEE Transactions on Automatic Control. – 1992,Vol. 37. – №6. – PP. 759-769.
- Moore B.C. Principal component analysis in linear systems: controllability, observability and model reduction / Moore B.C. // IEEE Transactions on Automatic Control. – 1981,Vol. AC-26. – PP. 17-32.
Downloads
How to Cite
Issue
Section
License
Copyright (c) 2014 Виктор Семенович Суздаль, Юрий Михайлович Епифанов
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.