Substantiation of the method of integrated group unification of machine and appliance designs

Authors

DOI:

https://doi.org/10.15587/1729-4061.2019.183844

Keywords:

primary element, theory of groups, theorem of unification, integrated group unification

Abstract

The study object: group unification of designs of process machines and appliances. Unification is one of important means of improving efficiency of production and operation of assemblies (parts) which reduces cost of their manufacture and repair. Unification is also a standardization subsystem which significantly increases the interest in its study and implementation.

One of the problems in development of group unification of designs consists in the lack of sufficient theoretical base and the studies towards unification are often reduced to simplification. This causes worsening of production efficiency because of slowdown of the process of creation and implementation of unified designs at a steady rate of growth of nomenclature of assemblies (parts), equipment and tools.

An approach was proposed based on a hypothesis of possibility of finding criteria (formulas) that will allow designers to a priori assess conformity of the design structure to the established levels of unification, define laws and specify methods for optimizing the design structures by adapting to the technological equipment. This approach was implemented through the use of the axiomatic theory, laws of composition, theory of groups and symbolic logic.

As a result of the study, definition of the primary element was obtained and a procedure of its construction was presented, formulas of unified parts were derived and the theorem of unification of assembly (part) design structure was formulated. Features of integrated unification of groups of parts and the equipment for their manufacture were considered.

The study results will allow designers to improve the intellectual design process and promote widespread use of the systems of automatic design of process equipment. The study results are of interest for:

‒ designers of enterprises when creating closed databases of unified parts (assemblies) which will significantly reduce time of development and introduction in manufacture  of new products and increase their efficiency;

‒ software users in creation of accessible open databases of unified parts (assemblies) aimed at concealed advertising and promotion of sales of unified products

Author Biographies

Gennadii Golub, National University of Life and Environmental Sciences of Ukraine Heroiv Oborony str., 15, Kyiv, Ukraine, 03041

Doctor of Technical Sciences, Professor, Head of Department

Department of Tractors, Automobiles and Bioenergosystems

Nataliya Tsyvenkova, Zhytomyr National Agroecological University Staryi blvd., 7, Zhytomyr, Ukraine, 10008 National University of Life and Environmental Sciences of Ukraine Heroiv Oborony str., 15, Kyiv, Ukraine, 03041

PhD, Associate Professor

Department of Mechanics and Agroecosystems Engineering

Department of Tractors, Automobiles and Bioenergosystems

 

Viacheslav Chuba, National University of Life and Environmental Sciences of Ukraine Heroiv Oborony str., 15, Kyiv, Ukraine, 03041

PhD, Associate Professor

Department of Tractors, Automobiles and Bioenergosystems

Anna Holubenko, Zhytomyr National Agroecological University Staryi blvd., 7, Zhytomyr, Ukraine, 10008

Assistant

Department of Electrification, Automation of Production and Engineering Ecology

Marina Tereshchuk, Zhytomyr National Agroecological University Staryi blvd., 7, Zhytomyr, Ukraine, 10008

Postgraduate Student

Department of Mechanics and Agroecosystems Engineering

References

  1. Tong-Viet, H. P. (2019). Orders of real elements in finite groups. Journal of Algebra. doi: https://doi.org/10.1016/j.jalgebra.2019.03.025
  2. Gilman, R. (2019). Algorithmic search in group theory. Journal of Algebra. doi: https://doi.org/10.1016/j.jalgebra.2019.08.021
  3. Aleksandrov, P. S. (1977). Vvedenie v teoriyu mnozhestv i obshchuyu topologiyu. Moscow: Nauka, 368.
  4. Cattaneo, M. E. G. V. (2017). The likelihood interpretation as the foundation of fuzzy set theory. International Journal of Approximate Reasoning, 90, 333–340. doi: https://doi.org/10.1016/j.ijar.2017.08.006
  5. Kargapolov, M. I., Merzlyakov, Yu. I. (1977). Osnovy teorii grupp. Moscow: Nauka, 240.
  6. Los, L., Kukharets, S., Tsyvenkova, N., Нolubenko, A., Tereshchuk, M. (2017). Substantiation of the structure theory of design of technological machines and devices. Technology Audit and Production Reserves, 5 (1 (37)), 48–55. doi: https://doi.org/10.15587/2312-8372.2017.113003
  7. Andreev, I. D. (1979). Teoriya kak forma organizatsii nauchnogo znaniya. Moscow: Nauka, 302.
  8. Freiwald, R. C. (2014). An Introduction to Set Theory and Topology. Saint Louis, Missouri: Washington University in St. Louis. doi: http://doi.org/10.7936/K7D798QH
  9. Wang, G.-J. (2004). Formalized theory of general fuzzy reasoning. Information Sciences, 160 (1-4), 251–266. doi: https://doi.org/10.1016/j.ins.2003.09.004
  10. Nacsa, J., Alzaga, A. (2003). Knowledge Management Support for Machine Tool Designers. IFAC Proceedings Volumes, 36 (3), 61–66. doi: https://doi.org/10.1016/s1474-6670(17)37736-4
  11. Freyman, L. S. (1971). Teoremy sushchestvovaniya. Moscow: Nauka, 135.
  12. Shao, J., Lu, F., Zeng, C., Xu, M. (2016). Research Progress Analysis of Reliability Design Method Based on Axiomatic Design Theory. Procedia CIRP, 53, 107–112. doi: https://doi.org/10.1016/j.procir.2016.07.027
  13. Yarosh, Y., Tsyvenkova, N., Kukharets, S., Нolubenko, A., Los, L. (2017). Substatiation of quantitative criteria of structural parts and units manufacturability evaluation. Technology Audit and Production Reserves, 2 (1 (40)), 4–11. doi: https://doi.org/10.15587/2312-8372.2018.129676
  14. Galán-García, J. L., Aguilera-Venegas, G., Rodríguez-Cielos, P., Padilla-Domínguez, Y., Galán-García, M. Á. (2019). SFOPDES: A Stepwise First Order Partial Differential Equations Solver with a Computer Algebra System. Computers & Mathematics with Applications, 78 (9), 3152–3164. doi: https://doi.org/10.1016/j.camwa.2019.05.010
  15. Engström, F., Kontinen, J., Väänänen, J. (2017). Dependence logic with generalized quantifiers: Axiomatizations. Journal of Computer and System Sciences, 88, 90–102. doi: https://doi.org/10.1016/j.jcss.2017.03.010
  16. Trigueiro de Sousa Junior, W., Barra Montevechi, J. A., de Carvalho Miranda, R., Teberga Campos, A. (2019). Discrete simulation-based optimization methods for industrial engineering problems: A systematic literature review. Computers & Industrial Engineering, 128, 526–540. doi: https://doi.org/10.1016/j.cie.2018.12.073
  17. McCarthy, J. A. (1963). A Basis for a Mathematical Theory of Computation. Studies in Logic and the Foundations of Mathematics, 35, 33–70. doi: https://doi.org/10.1016/s0049-237x(08)72018-4
  18. Kapovich, I., Myasnikov, A., Schupp, P., Shpilrain, V. (2003). Generic-case complexity, decision problems in group theory, and random walks. Journal of Algebra, 264 (2), 665–694. doi: https://doi.org/10.1016/s0021-8693(03)00167-4
  19. Liu, Y., Zhao, T., Ju, W., Shi, S. (2017). Materials discovery and design using machine learning. Journal of Materiomics, 3 (3), 159–177. doi: https://doi.org/10.1016/j.jmat.2017.08.002
  20. Gil'bert, D., Bernays, P. (1979). Osnovaniya matematiki. Logicheskie ischisleniya i formalizatsiya arifmetiki. Moscow: Nauka, 520.
  21. Mendel'son, E. (1976). Vvedenie v matematicheskuyu logiku. Moscow: Nauka, 320.
  22. Chapra, S., Canale, R. (2007). Numerical Methods for Engineers. McGraw Hill, 960.

Downloads

Published

2019-11-15

How to Cite

Golub, G., Tsyvenkova, N., Chuba, V., Holubenko, A., & Tereshchuk, M. (2019). Substantiation of the method of integrated group unification of machine and appliance designs. Eastern-European Journal of Enterprise Technologies, 6(1 (102), 51–59. https://doi.org/10.15587/1729-4061.2019.183844

Issue

Vol. 6 No. 1 (102) (2019): Engineering technological systems

Section

Engineering technological systems

License

Copyright (c) 2019 Gennadii Golub, Nataliya Tsyvenkova, Viacheslav Chuba, Anna Holubenko, Marina Tereshchuk

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.