Developing the model of reliability of a complex technical system of repeated use with a complex operating mode

Authors

DOI:

https://doi.org/10.15587/1729-4061.2020.214995

Keywords:

intended use, non-stationary coefficient of operational readiness, complex technical system

Abstract

Solving the problems of setting requirements to the reliability of complex technical systems for various purposes presupposes their classification according to the features characterizing the purpose, modes of use, etc. According to the modes of use, systems are divided into objects of continuous long-term use, repeated cyclic use, and single-use. The objects of repeated cyclic use include the systems operating in cycles. Durations of the periods of work and pause in the cycle are considered deterministic values. Technological and/or technical maintenance is carried out in pauses between the operation periods.

In addition to the known classification, it was proposed to introduce a group of systems of repeated use with a complex operating mode. A complex mode is understood as a mode that includes waiting for a request of the system use and executing the request after it arrives at a random time.

An analytical model of reliability of such a system has been developed in the form of a ratio for a non-stationary total coefficient of operational readiness. This model describes the processes of the system functioning in the intervals of waiting and use. In this case, the duration of the intervals of waiting and/or execution of the request are random values.

Ratios for this indicator were obtained for three options of specifying the functions of distribution of durations of waiting in a turn-on condition and fulfilling the request for use.

The developed model makes it possible to set requirements for reliability and maintainability of the systems with a complex operating mode.

The results of modeling the dependences of the operational indicators of reliability on parameters of the functions of distribution of durations of waiting and executing the request were obtained for different distributions. Recommendations were formulated concerning the substantiation of the requirements to reliability and maintainability of the systems under consideration

Author Biographies

Boris Lanetskii, Ivan Kozhedub Kharkiv National Air Force University Sumska str., 77/79, Kharkiv, Ukraine, 61023

Doctor of Technical Sciences, Professor, Leading Researcher

Research Department for the Development of the WME system of the Air Force Air Defense Forces of the Air Force Science Center

Vadim Lukyanchuk, Ivan Kozhedub Kharkiv National Air Force University Sumska str., 77/79, Kharkiv, Ukraine, 61023

Doctor of Technical Sciences, Senior Researcher, Head of Department

Research Department for the Development of the WME system of the Air Force Air Defense Forces of the Air Force Science Center

Hennadii Khudov, Ivan Kozhedub Kharkiv National Air Force University Sumska str., 77/79, Kharkiv, Ukraine, 61023

Doctor of Technical Sciences, Professor, Head of Department

Department of Radar Troops Tactic

Mikhail Fisun, Ivan Kozhedub Kharkiv National Air Force University Sumska str., 77/79, Kharkiv, Ukraine, 61023

Junior Researcher

Research Department for the Development of the WME system of the Air Force Air Defense Forces of the Air Force Science Center

Oleksii Zvieriev, Central Scientific Research Institute of Armament and Military Equipment of the Armed Forces of Ukraine Povitroflotsky ave., 6, Kyiv, Ukraine, 03168

PhD, Associate Professor, Researcher

Research Laboratory of Automation of Scientific Researches

Ivan Terebuha, Combat Unit A0800 Italiiskyi blvd., 3a, Odessa, Ukraine, 65012

PhD

References

  1. Gnedenko, B. V., Belyaev, Yu. K., Solov'ev, A. D. (2017). Matematicheskie metody v teorii nadezhnosti. Osnovnye harakteristiki nadezhnosti i ih statisticheskiy analiz. Moscow: KD Librokom, 584.
  2. GOST 27.003-2016. Industrial product dependability. Contents and general rules for specifying dependability requirements. Moscow: Standartinform.
  3. Belyaev, Yu. K. et. al.; Ushakova, I. A. (Ed.) (1985). Nadezhnost' tehnicheskih sistem. Moscow: Radio i svyaz', 608.
  4. Beichelt, F., Franken, P. (1984). Zuverlässigkeit und instandhaltung. Mathematische metoden. Berlin: Verlag Technik, 392.
  5. Kovtunenko, A. P., Zubarev, V. V., Lanetskiy, B. N., Zverev, A. A. (2006). Matematicheskoe modelirovanie v zadachah issledovaniya nadezhnosti tehnicheskih sistem. Kyiv: NAU, 236.
  6. Manov, N. A. et. al. (2010). Metody i modeli issledovaniya nadezhnosti elektroenergeticheskih sistem. Syktyvkar, 292.
  7. Viktorova, V. S., Stepanyants, A. S. (2016). Modeli i metody rascheta nadezhnosti tehnicheskih sistem. Moscow: LENAND, 256.
  8. Open’ko, P. V., Drannyk, P. A., Kobzev, V. V., Brovko, M. B., Zalevsky, G. S. (2017). Substantiation of Reliability Requirements for Mobility Means of Surface-to-Air Missile Systems. Advances in Military Technology, 12 (1), 91–99. doi: https://doi.org/10.3849/aimt.01122
  9. Tobias, P. A., Trindade, D. (2011). Applied Reliability. CRC, 600. doi: https://doi.org/10.1201/b11787
  10. Kredentser, B. P. (2016). Tehnicheskoe obsluzhivanie i nadezhnost' sistem s vremennym rezervirovaniem. Kyiv: Feniks, 382.
  11. Kredentser, B. P. (2019). Raschet pokazateley nadezhnosti tehnicheskih sistem s izbytochnost'yu. Kyiv: Feniks, 520.
  12. Kuzavkov, V., Khusainov, P., Vavrichen, O. (2017). Evaluation of the same type firmware network technical condition. Zbirnyk naukovykh prats Natsionalnoi akademiyi Derzhavnoi prykordonnoi sluzhby Ukrainy. Ser.: Viyskovi ta tekhnichni nauky, 3, 314–323.
  13. Zhang, W., Zhang, G., Ran, Y., Shao, Y. (2018). The full-state reliability model and evaluation technology of mechatronic product based on meta-action unit. Advances in Mechanical Engineering, 10 (5), 168781401877419. doi: https://doi.org/10.1177/1687814018774191
  14. Peng, D., Zichun, N., Bin, H. (2018). A New Analytic Method of Cold Standby System Reliability Model with Priority. MATEC Web of Conferences, 175, 03060. doi: https://doi.org/10.1051/matecconf/201817503060
  15. Zhu, S.-P., Liu, Q., Lei, Q., Wang, Q. (2017). Probabilistic fatigue life prediction and reliability assessment of a high pressure turbine disc considering load variations. International Journal of Damage Mechanics, 27 (10), 105678951773713. doi: https://doi.org/10.1177/1056789517737132
  16. Guo, J., Wang, X., Liang, J., Pang, H., Goncalves, J. (2018). Reliability Modeling and Evaluation of MMCs Under Different Redundancy Schemes. IEEE Transactions on Power Delivery, 33 (5), 2087–2096. doi: https://doi.org/10.1109/tpwrd.2017.2715664
  17. Ding, F., Sheng, L., Ao, Z. et. al. (2017). Research on reliability prediction method for traction power supply equipment based on continuous time Markov degradation process. Proc CSEE, 37, 1937–1945.
  18. Hou, K., Jia, H., Li, X., Xu, X., Mu, Y., Jiang, T., Yu, X. (2017). Impact-increment based decoupled reliability assessment approach for composite generation and transmission systems. IET Generation, Transmission & Distribution. doi: https://doi.org/10.1049/iet-gtd.2017.0745
  19. Peng, W., Shen, L., Shen, Y., Sun, Q. (2018). Reliability analysis of repairable systems with recurrent misuse-induced failures and normal-operation failures. Reliability Engineering & System Safety, 171, 87–98. doi: https://doi.org/10.1016/j.ress.2017.11.016
  20. Kashtanov, V. A., Medvedev, A. I. (2010). Teoriya nadezhnosti slozhnyh sistem. Moscow: FIZMATLIT, 608.
  21. Polovko, A. M., Gurov, S. V. (2006). Osnovy teorii nadezhnosti. Sankt-Peterburg: BHV-Peterburg, 702.
  22. Zubarev, V. V., Kovtunenko, A. P., Vasilenko, A. V., Chepkov, I. B., Shishanov, M. A. (2010). Osnovy teorii kompleksnogo obosnovaniya trebovaniy k tehnicheskim pokazatelyam slozhnyh sistem. Kyiv: Gorobets' G. S., 356.
  23. Khudov, H., Lishchenko, V., Lanetskii, B., Lukianchuk, V., Stetsiv, S., Kravchenko, I. (2020). The Coherent Signals Processing Method in the Multiradar System of the Same Type Two-coordinate Surveillance Radars with Mechanical Azimuthal Rotation. International Journal of Emerging Trends in Engineering Research, 8 (6), 2624–2630. doi: https://doi.org/10.30534/ijeter/2020/66862020

Downloads

Published

2020-10-31

How to Cite

Lanetskii, B., Lukyanchuk, V., Khudov, H., Fisun, M., Zvieriev, O., & Terebuha, I. (2020). Developing the model of reliability of a complex technical system of repeated use with a complex operating mode. Eastern-European Journal of Enterprise Technologies, 5(4 (107), 55–65. https://doi.org/10.15587/1729-4061.2020.214995

Issue

Vol. 5 No. 4 (107) (2020): Mathematics and Cybernetics - applied aspects

Section

Mathematics and Cybernetics - applied aspects

License

Copyright (c) 2020 Boris Lanetskii, Boris Lanetskii, Vadim Lukyanchuk, Vadim Lukyanchuk, Hennadii Khudov, Mikhail Fisun, Mikhail Fisun, Oleksii Zvieriev, Oleksii Zvieriev, Ivan Terebuha, Ivan Terebuha

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.