Vol. 5 No. 1 (101) (2019): Engineering technological systems

Engineering technological systems

• Improvement of the design of hydraulic transport devices for the transport of hydroabrasive media in the enrichment industry

  Azamat Seitkhanov, Vitaly Povetkin, Birzhan Bektibay, Mukhtarbek Tatybayev, Amina Bukayeva

  6-16

  • PDF

• Evaluation of gas separator effect on operability of gas-motor piston compressor valves

  Natig Seyidahmadov

  17-21

  • PDF

• Estimation of durability of carrier shafts in eccentric mechanisms

  Dinara Arinova, Borys Uspensky, Konstantin Avramov, Vitaly Povetkin

  22-28

  • PDF

• Development of a method for geometrical modeling of the airfoil profile of an axial turbomachine blade

  Valeriy Borisenko, Serhiy Ustenko, Iryna Ustenko, Kateryna Kuzma

  29-38

  • PDF

• Study of the problem on constructing quadrics at the assigned tangent cones

  Vira Аnpilogova, Svitlana Botvinovska, Alla Zolotova, Hanna Sulimenko

  39-48

  • PDF

• Investigating the process of shrinkage depression formation at the combined radial-backward extrusion of parts with a flange

  Natalia Hrudkina, Leila Aliieva, Payman Abhari, Oleg Markov, Liudmyla Sukhovirska

  49-57

  • PDF

• Prediction of chatter stability in turning

  Yuriy Petrakov, Mariia Danylchenko, Andrii Petryshyn

  58-64

  • PDF

• An impact of the ladle lining on the refining of reinforced steel when blowing with powders

  Mustafa Babanli, Ramin Karimov, Aydin Bayramov, Ibrahim Isa Abbasov

  65-71

  • PDF