Approximation by the Lamé-Gielis formula of the shell contours at superplastic forming of sheet blanks
DOI:
https://doi.org/10.31498/2225-6733.34.2017.105427Keywords:
superplastic forming, approximation, circuit, stage of forming, superformula, superellipseAbstract
The paper shows that the contour of a sheet blank at all stages of superplastic forming can be described using universal formulas known as a «superformula» Gielis and «superellipse» Lamé. The work provides information on the values range of the coefficients entering into these formulas. The paper shows the results of approximation by means of the proposed formulas of shell contours manufactured by superplastic forming by different methods. The application of the «superformula» to approximate the spherical shell contours in the first stage of molding has been tested. The graphs that show the ratio of the ordinates of the contours of the spherical shells and the hemisphere are given. It is shown that the contours of the shells from the AlMg5 and Pb-38%Sn alloys are rejected in the direction of the formation of parabolas. It was found that the deviations increase with decreasing the coefficient of high-speed hardening of the alloy of the shell. The contour of AMg6 alloy shells and blanks of variable thickness, with maximum in the central zone, is diverted from the hemisphere towards the ellipse. The first stage of forming in a non-uniform temperature field forms a contour of shells, similar to an ellipse. Forming shells with the ratio of the height (H) and the radius (R) as H = 0,6R in the angular zones of the matrix forms intermediate contours of different shapes. This shape depends on the presence of lubricant between the shell and the bottom of the matrixReferences
Список использованных источников (ГОСТ):
Giuliano G. Superplastic forming of advanced metallic materials / G. Giuliano. – Oxford : Woodhead Publishing Limited, 2011. – 377 p.
Специальные технологические процессы и оборудование обработки давлением / В.А. Голенков [и др.]. – М. : Машиностроение, 2004. – 474 с.
Анищенко А.С. Изотермическая и сверхпластическая деформация металлов / А.С. Анищенко. – Saarbrücken : LAMBERT Academic Publishing, 2014. – 129 с.
Holt D.L. The Relation Between Superplasticity and Grain Boundary Shear in the Aluminum – Zinc Eutectic Alloy / D.L. Holt // Trans. AWE. – 1968. – V. 242. – № 1. – Р. 25-31.
Lechten J.-P. Analyses theorique et experimentale du gonflement dans le domaine de superplasticite / J.-P. Lechten, J.-C. Patrat, B. Baudelet // Revue de Physique Appliquee. – 1977. – № 12 (1). – Р. 7-14.
Hwang Y.M. Evaluation of tubular materials by a hydraulic bulge test / Y.M. Hwang, Y.K. Lin, T. Altan // International Journal Machine Tools and Manufacturing. – 2007. – № 47. – P. 343-351.
Comparaison de trois modeles pour le post-traitment de mesures issues du test de gonflement libre de tubes / L. Vitu [et al.] // 22-ieme Congres Francais de Mecanique. – Lyon, 2015. – P. 67-78.
Куликов С.Н. Возможные варианты уточнения модели свободного термоформования изделий в круглой пройме / С.Н. Куликов // Научные труды МАТИ. – 2010. – № 17 (89). – С. 50-53.
Cornfield G.C. The forming of superplastic sheet metal / G.C. Cornfield, R.H. Johnson // International Journal of Mechanical Science. – 1970. – № 12. – Р. 479-490.
Пневмоформовка листовых материалов в состоянии сверхпластичности / С.М. Поляк и др.. – М. : ЦНТИ «Поиск», 1981. – 107 с.
Смирнов О.М. Обработка металлов давлением в состоянии сверхпластичности / О.М. Смирнов. – М. : Машиностроение, 1979. – 184 с.
Деформирование титановых сплавов в условиях сверхпластичности / Б.В. Скуридин [и др.] // Кузнечно-штамповочное производство. – 1977. – № 12. – С. 35-38.
Рудской А.И. Механика динамической сверхпластичности алюминиевых сплавов / А.И. Рудской, Я.И. Рудаев. – СПб. : Наука, 2009. – 218 с.
Ragab A.R. Thermoforming of superplastic sheet in shaped dies / A.R. Ragab. – Metals Technology. – 1983. – V. 10, Issue 1. – P. 340-348.
Кухарь В.В. Кривая распределения температур при дифференцированном нагреве за-готовок перед безручьевой гибкой-профилированием / В.В. Кухарь, А.И. Сердюк // Вісник НТУУ «КПІ». Серія : «Машинобудування». – 2016. – № 1 (76). – С. 65-72.
Способы уменьшения разнотолщинности при пневмоформовке полых деталей в режиме сверхпластичности / О.М. Смирнов и др. // Теория и технология обработки металлов давлением : Сб. науч. тр. / МИСиС. – М. : Металлургия, 1979. – № 113. – С. 70-75.
Sadowsky A.J. Exploration of novel geometric imperfection forms in buckling failures of thin – walled metal silos under eccentric discharge / A.J. Sadowsky, A.M. Rotter // International Journal of Solids and Structures, 2012. – V. 50. – P. 781-794.
Gielis J.A. Generic Geometric Transformation that unifies a Wide Range of Natural and Ab-stract Shapes / J.А. Gielis // American Journal of Botany. – 2003. – № 90 (3). – Р. 333-338.
Анищенко А.С. Аппроксимация контура оболочек при сверхпластической формовке формулой Ляме / А.С. Анищенко, В.В. Кухарь, Е.А. Мкpтчян // Вестник КРСУ. Серия : «Естественные и технические науки». – 2017. – Т. 17. – № 1. – С. 3-5.
References:
Giuliano G. Superplastic forming of advanced metallic materials. Oxford, Woodhead Publ. Limited, 2011. 377 p. (Eng.)
Golenkov V.A., Dmitriev A.M., Kukhar' V.D., Radchenko S.Iu. Spetsialnye tehnologicheskie protsessy i oborudovanie obrabotki davleniem [Special technological processes and equipment for pressure processing]. Moscow, Mashinostroenye Publ., 2004. 474 p. (Rus.)
Anishchenko A.S. Izotermicheskaya i sverhplasticheskaya deformatsya metallov [Isothermal and superplastic deformation of metals]. Saarbrücken, LAMBERT Academic Publ., 2014. 129 p. (Rus.)
Holt D.L. The Relation Between Superplasticity and Grain Boundary Shear in the Aluminum – Zinc Eutectic Alloy. Transactions of the Metallurgical Society of AIME, 1968, iss. 242, no. 1, pp. 25-31. (Eng.).
Lechten J.-P., Patrat J.-C., Baudelet B. Theoretical analyzes and experimental swelling in the area of superplasticity. Revue de Physique Appliquee, 1977, no. 12 (1), pp. 7-14. (Fr.).
Hwang Y.M., Lin Y.K., Altan T. Evaluation of tubular materials by a hydraulic bulge test. International Journal Machine Tools and Manufacturing, 2007, no. 47, pp. 343-351. (Eng.)
Vitu L. Comparison of three models for the post-treatment equipment measurements from the free tubes swelling test. Abstracts of 22-th Congress of French Mecanique, Lyon, 2015, pp. 67-78. (Eng.)
Kulikov S.N. Vozmozhnye varianty utochnenya modeli svobodnogo termoformovanya iz-delyi v krugloi proime [Possible options for clarifying the model of free thermoforming of products in a round armhole]. Nauchnye trudy MATI – Scientific works of MATI, 2010, no. 17 (89), pp. 50-53. (Rus.)
Cornfield G.C., Johnson R.H. The forming of superplastic sheet metal / G.C. Cornfield, R.H. Johnson. International Journal of Mechanical Science, 1970, no. 12, pp. 479-490. (Eng.)
Polyak S.M., Solomatin V.S., Tsepin M.A., Anishchenko A.S. Pnevmoformovka listovyh materialov v sostoyanii sverhplastichnosty [Pneumatic forming of sheet materials in superplasticity state]. Moscow, TsNTI «Poisk» Publ., 1981. 107 p. (Rus.)
Smirnov O.M. Obrabotka metallov davleniem v sostoyanii sverhplastichnosty [Processing of metals by pressure in the state of superplasticity]. Moscow, Machinostroenye Publ., 1979. 184 p. (Rus.)
Skuridin B.V., Smirnov O.M., Gusev Iu.V., Panfilova O.V. Deformirovanye titanovyh spla-vov v usloviyah sverhplastichnosti [Deformation of titanium alloys under superplasticity conditions]. Kuznechno-shtampovochnoye proizvodstvo – Forging and stamping production, 1977, no. 12, pp. 35-38. (Rus.)
Rudskoy A.I., Rudaev Y.I. Mekhanika dinamicheskoy sverhplastichnosti aluminievyh splavov [Mechanics of dynamic superplasticity of aluminum alloys]. Saint Peterburg, Nauka Publ., 2009. 218 р. (Rus.)
Ragab A.R. Thermoforming of Superplastic Sheet in Shaped Dies. Metal. Technologue, 1983, iss. 10, pp. 340-348. (Eng.)
Kuhar V.V., Serdjuk A.I. Krivaja raspredelenija temperatur pri differencirovannom nagreve zagotovok pered bezruch'evoj gibkoj-profilirovaniem [The temperature distribution curve for differentiated heating of the preforms before the bezel-free flexible profiling]. Vіsnik NTUU «KPІ». Serіja: mashinobuduvannja – Journal of Mechanical Engineering the National Technical University of Ukraine «Kyiv Polytechnic Institute», 2016, no. 1 (76), pp. 65-72. (Rus.)
Smirnov O.M., Guk V.O., Tsepin M.A., Anishchenko A.S. Sposoby umenchenya raznotolchinnosty pri pnevmoformovke [Methods for reducing the variability of the thickness during the pneumoforming of hollow parts in the superplasticity regime]. Teorya i tehnologya obrabotki metallov davleniem: sb. nauch. tr. MISiS – Theory and technology of metal forming: col. of sci. works of MISA, 1979, no. 113, pp. 70-75. (Rus.)
Sadowsky A.J., Rotter A.M. Exploration of novel geometric imperfection forms in buckling failures of thin-walled metal silos under eccentric discharge. International Journal of Solids and Structures, 2012, no. 50, pp. 781-794. (Eng.)
Gielis J.A. Generic Geometric Transformation that unifies a Wide Range of Natural and Ab-stract Shapes. American Journal of Botany, 2003, no. 90 (3), pp. 333-338. (Eng.)
Anishchenko A.S., Kuhar V.V., Mkrtchyan E.A. Approksimatsya kontura obolochek pri sverhplasticheskoi formovke formuloi Lame [Approximation of the shell contour for superplastic forming by the Lamé formula]. Vestnik KRSU, serya «Estestvennye i tehnicheskie nauki» – Bulletin of the Kyrgyz-Russian Slavonic University, series «Natural and Technical Sciences», 2017, vol. 17, no. 1, pp. 3-5. (Rus.)
Downloads
How to Cite
Issue
Section
License
The journal «Reporter of the Priazovskyi State Technical University. Section: Technical sciences» is published under the CC BY license (Attribution License).
This license allows for the distribution, editing, modification, and use of the work as a basis for derivative works, even for commercial purposes, provided that proper attribution is given. It is the most flexible of all available licenses and is recommended for maximum dissemination and use of non-restricted materials.
Authors who publish in this journal agree to the following terms:
1. Authors retain the copyright of their work and grant the journal the right of first publication under the terms of the Creative Commons Attribution License (CC BY). This license allows others to freely distribute the published work, provided that proper attribution is given to the original authors and the first publication of the work in this journal is acknowledged.
2. Authors are allowed to enter into separate, additional agreements for non-exclusive distribution of the work in the same form as published in this journal (e.g., depositing it in an institutional repository or including it in a monograph), provided that a reference to the first publication in this journal is maintained.
