The structural and dynamic characteristics of a water-polimer high-speed jet
DOI:
https://doi.org/10.31498/2225-6733.34.2017.105670Keywords:
water-polymer jet, initial section, jet quality, jet-forming head, polyethyleneoxide solutionAbstract
The aim is to study the structural and dynamic characteristics of the water-polymer jet, what is of decisive importance for understanding the nature of the abnormally high cutting ability. A complex study of the structure and dynamics of a water-polymer high-speed jet has been carried out. Analysis of the photographs of jets of aqueous PEO solution indicates that adding polyethylene oxide (PEO) into water results in a significant increase in the initial sections of the water-polymer jet, which characterizes the quality of its formation, and leads to compactness due to a reduction of its diameter. The obtained experimental data made it possible to propose a relationship for determining the dimensionless value of the initial sections of jets of aqueous PEO solutions of different concentration and molecular mass of PEO, taking into account the real parameters of the jet forming head. Investigation of changes in the energy capabilities of water-polymer jets, which were estimated by the force of the jet impact on the steel obstacle, made it possible to establish the features of their dynamics. The obtained experimental data explain the nature of the change in the cutting properties of the water-polymer jet as a function of the distance between the surface of the material that is being cut and the cut of the nozzle. If the distance from the nozzle to the surface of the material is less than the size of the initial sections of the water-polymer jet, an increase in the diameter of the nozzle outlet hole will lead to a reduction in the depth of the cut. If, however, the distance from the nozzle to the surface of the material approaches or exceeds the size of the main part of the water-polymer jet, then the depth of the cut will increase with increasing diameter of the nozzle at a constant pressure. The use of structural and dynamic characteristics of water-polymer jets is substantiated when establishing rational parameters of equipment for water-polymer processing of materials by cuttingReferences
Список использованных источников (ГОСТ):
Заплетников И.Н. Оборудование водорезания пищевых продуктов / И.Н. Заплетников, А.В. Гордиенко. – Донецьк : Донец. нац. ун-т економіки і торгівлі, 2012. – 207 с.
Пат. 74608 Україна, МПК B 03 B 4/00. Спосіб різання харчових продуктів високошвидкісним гідроабразивним струменем / А.В. Погребняк, М.В. Наумчук, Е.В. Пономаренко. – № u201202141; заявл. 24.02.12; опубл. 12.11.12, Бюл. № 21. – 3 с.
Pogrebnyak A.V. Structure formation in polyethyleneoxide solution streaming through jet-shaping head while cutting foodstuffs / A.V. Pogrebnyak, Yu.F. Ivanyuta // Scientific journal NRU ITMO Series: Processes and equipment. – 2015. – № 1 (23). – P. 138-141.
Deynichenko G.V. The nature of increased cutting ability of a polyethylene oxide solution jet while processing food products / G.V. Deynichenko, A.V. Pogrebnyak, Yu.F. Ivanyuta // Scientific journal NRU ITMO Series: Processes and equipment. – 2015. – № 3 (25). – P. 6-13.
Pogrebnyak A.V. Research of the process of hydrocutting food products / A.V. Pogrebnyak, G.V. Deynichenko // Scientific journal NRU ITMO Series: Processes and equipment. – 2016. – № 3 (29). – P. 48-62.
Погребняк А.В. Высокоэффективное гидрорезание твердых пищевых продуктов и материалов / А.В. Погребняк // Управление реологическими свойствами пищевых продуктов : I научно-практическая конференция и выставка с международным участием, 25-26 сентября 2008 г. / ГОУ ВПО «МГУПП». – М. : МГУПП, 2008. – С. 173-179.
Волошин В.С. Экологическая технология создания водозащитных экранов / В.С. Волошин, В.Г. Погребняк. – Донецк : Ноулидж, 2010. – 482 с.
Заплетніков І.М. Структура і динаміка струменя гідрорізки / І.М. Заплетніков, А.В. Погребняк // Праці Таврійського державного агротехнологічного університету. – 2010. – Вип. 10. – С. 3-13.
Никонов Г.П. Исследование динамики и структуры тонкой струи воды с давлением 500 ат. / Г.П. Никонов, С.С. Шавловский, В.В. Хныкин. – М. : ИГД им. А.А. Скочинского, 1969. – 38 с.
Научная школа Ивана Лукича Повха (к 100-летию со дня рождения) / Под общ. ред. А.Б. Ступина. – Донецк : ДонНУ, 2009, – 317 с.
Шавловский С.С. Влияние угла конусности и длины цилиндрического участка насадки на компактность струи / С.С. Шафровский, В.Е. Бафталовский // Технология добычи угля подземным способом. – 1971. – № 12. – С. 87-92.
Шавловский С.С. Основы динамики струй при разрушении горного массива / С.С. Шавловский. – М. : Наука, 1979. – 174 с.
Бафталовский В.Е. Влияние качества обработки насадки на компактность водяных струй в автомодельном режиме истечения / В.Е. Бафталовский // Науч. труды ИГД им. А.А. Скочинского. – 1977. – Вып.150. – С. 97-105.
Мерзляев В.Г. Физико-технические основы гидроструйных технологий в горном производстве / В.Г. Мерзляев, В.Е. Бафталовский. – М. : ФГУП ННЦ ГП ИГД им. А.А. Скочинского, 2004. – 645 с.
Рабинович Е.З. Гидравлика / Е.З. Рабинович. – М. : Недра, 1974. – 296 с.
References:
Zapletnikov I.N., Gordienko A.V. Oborudovanie vodorezaniia pishchevykh produktov [Equipment of food products hydrocutting]. Donetsk, Donetsk natonal university of economics and trade Publ., 2012. 207 p. (Rus.)
Pogrebnyak А.V., Naumchuk М.V., Ponomarenko E.V. Sposіb rіzannia kharchovikh produktіv visokoshvidkіsnim gіdroabrazivnim strumenem [The method of food produucts cutting by high-speed hydroabrasive-jet] Patent UA, no. 74608, 2012. (Ukr.)
Pogrebnyak A.V., Ivanyuta Yu.F. Structure formation in polyethyleneoxide solution streaming through jet-shaping head while cutting foodstuffs. Scientific journal NRU ITMO Series: Processes and equipment, 2015, no. № 1 (23), pp. 138-141. (Eng.)
Deynichenko G.V., Pogrebnyak A.V., Ivanyuta Yu.F. The nature of increased cutting ability of a polyethyleneoxide solution jet while processing food products. Scientific journal NRU ITMO Series: Processes and equipment, 2015, no. 3 (25), pp. 6-13. (Eng.)
Pogrebnyak A.V., Deynichenko G.V. Research of the process of hydrocutting food products. Scientific journal NRU ITMO Series: Processes and equipment, 2016, no. 3 (29), pp. 48-62. (Eng.)
Pogrebnyak A.V. Vysokoeffektivnoe gidrorezanie tverdykh pishchevykh produktov i materialov. Anotatsії dopovіdei 1 nauk.-prakt. konf. «Upravlenie reologicheskimi svoistvami pishchevykh produktov» [Highly effectient hydrocutting hard food products and materials. Abstracts of 1st Sci.-Pract. Conf. «Management of rheological properties of food products»]. Moscow, 2008, pp. 173-179. (Rus.)
Voloshin V.S., Pogrebnyak V.G. Ekologicheskaia tekhnologiia sozdaniia vodozashchitnykh ekranov [Ecological technology of creating waterproof screens]. Donetsk, Knowledge Publ., 2010. 482 p. (Rus.)
Zapletnikov I.N., Pogrebnyak А.V. Struktura і dinamіka strumenia gіdrorіzki [The structure and dynamics jet hydrocutting]. Pratsі Tavrіis'kogo derzhavnogo agrotekhnologіchnogo unіversitetu –Journal Tauride state university agrotechnological, 2010, iss. 10, pp. 3-13. (Ukr.)
Nikonov G.P., Shavlovsky S.S., Khnykin В.В. Issledovanie dinamiki i struktury tonkoi strui vody s davleniem 500 at. [Investigation the dynamics and structure of a thin jet water with pressure 500 atm.]. Moscow, IGD named after А.А. Skochinsky Publ., 1969. 38 p. (Rus.)
Under total. ed. Stupin А.B. Nauchnaia shkola Ivana Lukicha Povkha (k 100-letiiu so dnia rozhdeniia) [Scientific school of Ivan Lukich Povkh (to the 100th anniversary of his birth)]. Donetsk, DonNU Publ., 2009. 317 p. (Rus.)
Shavlovsky S.S., Baftalovsky V.E. Vliyaniye ugla konusnosti i dliny tsilindricheskogo uchastka nasadki na kompaktnost' strui [Effect of the taper angle and the length of the cylindrical portion nozzle on the compactness jet]. Tekhnologiia dobychi uglia podzemnym sposobom – Technology of coal mining by underground method, 1971, no. 12, pp. 87-92. (Rus.)
Shavlovsky S.S. Osnovy dinamiki strui pri razrushenii gornogo massiva [Fundamentals of jet dynamics in the destruction of the mountain massif]. Moscow, Science Publ, 1979. 174 p. (Rus.)
Baftalovsky V.E. Vliianie kachestva obrabotki nasadki na kompaktnost' vodianykh strui v avtomodel'nom rezhime istecheniia [Influence of the nozzle processing quality on the water jets compactness in the automodel flow regime]. Nauch. trudy IGD im. A.A. Skochinskogo – Scientific Works IGD named after А.А. Skochinsky, 1977, iss. 150, pp. 97-105. (Rus.)
Merzlyaev V.G., Baftalovsky V.E. Fiziko-tekhnicheskie osnovy gidrostruinykh tekhnologii v gornom proizvodstve [Physico-technical foundations of hydro-jet technologies in mining production]. Moscow, FSUE NSC of GP IGD named after A.A. Scochinsky Publ., 2004. 645 p. (Rus.)
Rabinovich E.Z. Gidravlika [Hydraulics]. Moscow, Nedra Publ., 1974. 296 p. (Rus.)
Downloads
How to Cite
Issue
Section
License
The journal «Reporter of the Priazovskyi State Technical University. Section: Technical sciences» is published under the CC BY license (Attribution License).
This license allows for the distribution, editing, modification, and use of the work as a basis for derivative works, even for commercial purposes, provided that proper attribution is given. It is the most flexible of all available licenses and is recommended for maximum dissemination and use of non-restricted materials.
Authors who publish in this journal agree to the following terms:
1. Authors retain the copyright of their work and grant the journal the right of first publication under the terms of the Creative Commons Attribution License (CC BY). This license allows others to freely distribute the published work, provided that proper attribution is given to the original authors and the first publication of the work in this journal is acknowledged.
2. Authors are allowed to enter into separate, additional agreements for non-exclusive distribution of the work in the same form as published in this journal (e.g., depositing it in an institutional repository or including it in a monograph), provided that a reference to the first publication in this journal is maintained.
