Effect of quenching on the structure, composition of metastable retained austenite and abrasive wear resistance of cemented structural steels
DOI:
https://doi.org/10.31498/2225-6733.25.2012.29304Keywords:
carburizing, hardening, metastable residual austenite, abrasive wear resistance, hardnessAbstract
The results of experimental studies of the effect of cementation and subsequent hardening of different temperatures on the structure, hardness and abrasive wear resistance of steel (0,27 %C) and steel (0,55 %C, 1 %Mn) were submitted. The
optimal technological regimes of hardening that improve durability steel (0,27 %C) ~ 3 times, and steel (0,55 %C, 1 %Mn) more than 4 times were determined
References
Макаров А.В. Структура и износостойкость цементированной стали 20ХН3А, подвергнутой электронно-лучевой и лазерной обработкам / А.В. Макаров и др. // ФММ. – 1989. – Т. 68, № 1. – С. 126-132.
Gajda B. A study of microstructure and phase transformations of CMnAlSi TRIP steel / B. Gajda, A.K. Lis // J. Achievements in Materials and Manufacturing Engineering. – 2008. – N. 31. – P. 646-653.
Koistinen D.P. A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels / D.P. Koistinen, R.E. Marburger // Acta Metallurgica. – 1959. – V. 7, № 1. – P. 59-60.
Малинов Л.С. Повышение абразивной износостойкости цементированных сталей 18ХГТ и 12ХНЗА за счет получения метастабильного аустенита / Л.С. Малинов, Е.Л. Малинова, Е.Я. Харланова // Металлы. – 1993. – № 2. – С. 108-111.
Геллер А.Л. Остаточный аустенит и износостойкость легированных цементованных сталей / А.Л. Геллер, В.Н. Юрко // Изв. ВУЗов. Черная металлургия. – 1991. – №6. – С. 66-69.
Попов В.С. Структурные изменения в нестабильно аустенитных сталях при абразивном изнашивании / В.С. Попов, Н.Н. Брыков // МиТОМ. – 1971. – № 9. – С. 54-55.
Чейлях А.П. Экономнолегированные метастабильные сплавы и упрочняющие технологии / А.П. Чейлях. – Мариуполь : издательство ПГТУ. – 2009. – 483 с.
How to Cite
Issue
Section
License
The journal «Reporter of the Priazovskyi State Technical University. Section: Technical sciences» is published under the CC BY license (Attribution License).
This license allows for the distribution, editing, modification, and use of the work as a basis for derivative works, even for commercial purposes, provided that proper attribution is given. It is the most flexible of all available licenses and is recommended for maximum dissemination and use of non-restricted materials.
Authors who publish in this journal agree to the following terms:
1. Authors retain the copyright of their work and grant the journal the right of first publication under the terms of the Creative Commons Attribution License (CC BY). This license allows others to freely distribute the published work, provided that proper attribution is given to the original authors and the first publication of the work in this journal is acknowledged.
2. Authors are allowed to enter into separate, additional agreements for non-exclusive distribution of the work in the same form as published in this journal (e.g., depositing it in an institutional repository or including it in a monograph), provided that a reference to the first publication in this journal is maintained.
