Influence of TCT on moving away of hydrogen from superficial layers of steelworks
DOI:
https://doi.org/10.31498/2225-6733.25.2012.29327Keywords:
steel, hydrogen, closeness of dislocation, thermo-cyclical treatmentAbstract
In the article intercommunication is shown between the closeness of the defects formed at thermal-cycle treatment (ТСТ), and amount of the hydrogen extracted
from the surface of detail
References
Федюкин В.К. Термоциклическая обработка металлов и деталей машин / В.К. Федюкин, М.Е. Смагоринский. – Л. : Машиностроение, 1989. – 255 с.
Криштал М.А. Интенсификация процесса цементации методами термоциклической обработки / М.А. Криштал, М.С. Кенис // МиТОМ. – 1984. – № 5. – С. 58-61.
Бокштейн С.З. Диффузия и структура металлов / С.З. Бокштейн. – Металлургия, 1973. – 208 с.
Термоциклическая обработка сталей, сплавов и композиционных материалов / Под ред. М.Х. Хоршорова. – М. : Наука, 1984. – 186 с.
Иващенко В.Ю. Влияние ТЦО на свойства валковой стали 50ХН / В.Ю. Иващенко // Захист металургійних машин від поломок : межвуз. темат. сб. науч. тр. – Маріуполь, 2000. – Вип. № 5. – С. 257-261.
Иващенко В.Ю. Управление механическими свойствами валковых сталей с помощью термоциклической обработки / В.Ю. Иващенко // Строительство, материаловедение, машиностроение. – 2003.– Вып. 22. – Ч.1. – С. 201.
Иващенко В.Ю. Влияние ТЦО с переменными параметрами на состояние субструктуры и свойства валковой стали 50ХН / В.Ю. Иващенко, Ф.К. Ткаченко // Нові матеріали і технології в металургії та машинобудуванні, 2004. – № 2. – С. 16-18.
Астафьев A.A. О растворимости водорода в деформированной стали / A.A. Астафьев, В.Г. Дубинская, Н.Д. Еременко // МИТОМ. 1987. – № 7. – С. 24-27.
Гурьев А.М. ТЦО углеродистых и инструментальных сталей / А.М. Гурьев, Д.П. Чепрасов, А.А. Рубцов // Всероссийская НТК : сб. тез. докл. – Барнаул : Изд-во АлтГТУ,1996. – С.87.
Downloads
How to Cite
Issue
Section
License
The journal «Reporter of the Priazovskyi State Technical University. Section: Technical sciences» is published under the CC BY license (Attribution License).
This license allows for the distribution, editing, modification, and use of the work as a basis for derivative works, even for commercial purposes, provided that proper attribution is given. It is the most flexible of all available licenses and is recommended for maximum dissemination and use of non-restricted materials.
Authors who publish in this journal agree to the following terms:
1. Authors retain the copyright of their work and grant the journal the right of first publication under the terms of the Creative Commons Attribution License (CC BY). This license allows others to freely distribute the published work, provided that proper attribution is given to the original authors and the first publication of the work in this journal is acknowledged.
2. Authors are allowed to enter into separate, additional agreements for non-exclusive distribution of the work in the same form as published in this journal (e.g., depositing it in an institutional repository or including it in a monograph), provided that a reference to the first publication in this journal is maintained.







