Theoretical and experimental determination of the technological possibilitiescal processes of grinding and turning

Authors

  • I. E. Ivanov ДВНЗ «Приазовський державний технічний університет», м. Маріуполь, Ukraine

DOI:

https://doi.org/10.31498/2225-6733.25.2012.29474

Keywords:

grinding, turning, cutter, processing performance

Abstract

With one voice the theoretical analysis of the possibilities to increase productivity in grinding process and turning for a given slice thickness, determined strength properties tool. A new analytical dependence for the average slice thickness for grinding, which is different from the known dependence of a digital coefficient, which opens up new possibilities determining the conditions of intensifying the process of grinding. The experimentally determined values of tool life for grinding and turning work sneeze (contact) surfaces of cups and cones Sediment apparatus blast furnace restored using durable surfacing material. It is proved that in terms of reducing the costs associated with the consumption of cutting tools for a given processing performance, effectively apply the grinding process

Author Biography

I. E. Ivanov, ДВНЗ «Приазовський державний технічний університет», м. Маріуполь

Кандидат технічних наук, старший викладач

References

Маталин А.А. Технология машиностроения: учебник / А.А. Маталин. – Л.: Машиностроение, 1985. – 496 с.

Физико-математическая теория процессов обработки материалов и технологии машиностроения / Под общ. ред. Ф.В. Новикова и А.В. Якимова. В десяти томах. – Т. 1. ”Механика резания материалов” – Одесса: ОНПУ, 2002. – 580 с.

Рыбицкий В.А. Опыт внедрения алмазного шлифования деталей с защитными покрытиями / В.А. Рыбицкий. − К.: Общество ”Знание” УССР, 1987. − 23 с.

Новиков Ф.В. Технологическое обеспечение высококачественной обработки деталей с износостойкими наплавками металлургического назначения / Ф.В. Новиков, В.А. Андилахай // Наукові праці Донецького національного технічного університету. Серія: Машинобудування і машинознавство. − Донецьк: ДонНТУ. − 2010. − Вип. 7 (166). − С. 53-60.

Бобров В.Ф. Основы теории резания металлов / В.Ф. Бобров. – М.: Машиностроение, 1975. – 343 с.

Алмазно-абразивная обработка материалов: справочник / Под ред. проф. А.Н. Резникова. – М.: Машиностроение, 1977. – 390 с.

Downloads

How to Cite

Ivanov, I. E. (2014). Theoretical and experimental determination of the technological possibilitiescal processes of grinding and turning. Reporter of the Priazovskyi State Technical University. Section: Technical Sciences, (25), 184–189. https://doi.org/10.31498/2225-6733.25.2012.29474

Issue

No. 25 (2012): Reporter of the Priazovskyi State Technical University. Section: Technical sciences

Section

Mechanical engineering and metal working

License

The journal «Reporter of the Priazovskyi State Technical University. Section: Technical sciences» is published under the CC BY license (Attribution License).

This license allows for the distribution, editing, modification, and use of the work as a basis for derivative works, even for commercial purposes, provided that proper attribution is given. It is the most flexible of all available licenses and is recommended for maximum dissemination and use of non-restricted materials.

Authors who publish in this journal agree to the following terms:

1. Authors retain the copyright of their work and grant the journal the right of first publication under the terms of the Creative Commons Attribution License (CC BY). This license allows others to freely distribute the published work, provided that proper attribution is given to the original authors and the first publication of the work in this journal is acknowledged.

2. Authors are allowed to enter into separate, additional agreements for non-exclusive distribution of the work in the same form as published in this journal (e.g., depositing it in an institutional repository or including it in a monograph), provided that a reference to the first publication in this journal is maintained.