Influence of CCM secondary cooling zone nozzles location on conditions of slabs non uniform cooling

Authors

  • A. V. Fedosov ДВНЗ «Приазовський державний технічний університет», м. Маріуполь, Ukraine

DOI:

https://doi.org/10.31498/2225-6733.26.2013.29707

Keywords:

continuous casting machine, secondary cooling zone, nozzle, strand, water and air spray

Abstract

The analysis of influence of location height of the secondary cooling zone nozzles on the temperature variations of the slab surface layer is conducted. An analytical relation for the calculation of the water concentration attenuation coefficient depending on the basic technological and technical parameters of the CCM is offered

Author Biography

A. V. Fedosov, ДВНЗ «Приазовський державний технічний університет», м. Маріуполь

Кандидат технічних наук, доцент

References

Теоретическое и экспериментальное исследование влияния параметров литья на растрескивание непрерывнолитого слитка / А.А. Позняк, В.А. Берзинь, А.М. Кац [и др.] // Изв. АН ЛатвССР, Сер. физ. и техн. наук. – 1981. – №1. – С. 72-79.

Моделирование и оптимизация температурного поля непрерывно-литого слитка / И.О. Мищенко, А.В. Дуб, Е.В. Макарычева [и др.] // Известия Вузов ЧМ. – 2007. – №3. – С. 15-21.

Preliminary Numerical Experiments in Multiobjective Optimization of a Metallurgical Production Process / F. Bogdan, T. Tea, S. Jožef [etc.] // Informatica. – 2007. – №3. – pp. 233–240.

Модернизация системы вторичного охлаждения слябовой МНЛЗ ОАО «Уральская сталь» / А.В. Куклев, В.В. Тиняков, А.М. Лонгинов [и др.] // Металлург. – 2011. – №2. – С. 39-41.

Сравнение существующих концепций вторичного охлаждения непрерывнолитых заготовок на традиционных слябовых МНЛЗ / Л.В. Буланов, Н.А. Юровский, В.В. Бусыгин [и др.] // Бюллетень «Черная металлургия». – 2012. – №3. – С. 40-50.

Федосов А.В. Математическая модель расчета условий охлаждения поверхности непрерывнолитых заготовок в ЗВО МНЛЗ / А.В. Федосов, Е.А. Казачков, В.И. Бурлаков // Математичне моделювання. – 2012. – №2(27). – С. 31-35.

Patrick B. Practical aspects of the design, operation and performance of caster spray systems / B. Patrick, B. Barber, D. Brown // La Revue de Metallurgie. – 2001. – April. – pp. 383–390.

Downloads

How to Cite

Fedosov, A. V. (2014). Influence of CCM secondary cooling zone nozzles location on conditions of slabs non uniform cooling. Reporter of the Priazovskyi State Technical University. Section: Technical Sciences, (26), 34–40. https://doi.org/10.31498/2225-6733.26.2013.29707

Issue

No. 26 (2013): Reporter of the Priazovskyi State Technical University. Section: Technical sciences

Section

Steel metallurgy

License

The journal «Reporter of the Priazovskyi State Technical University. Section: Technical sciences» is published under the CC BY license (Attribution License).

This license allows for the distribution, editing, modification, and use of the work as a basis for derivative works, even for commercial purposes, provided that proper attribution is given. It is the most flexible of all available licenses and is recommended for maximum dissemination and use of non-restricted materials.

Authors who publish in this journal agree to the following terms:

1. Authors retain the copyright of their work and grant the journal the right of first publication under the terms of the Creative Commons Attribution License (CC BY). This license allows others to freely distribute the published work, provided that proper attribution is given to the original authors and the first publication of the work in this journal is acknowledged.

2. Authors are allowed to enter into separate, additional agreements for non-exclusive distribution of the work in the same form as published in this journal (e.g., depositing it in an institutional repository or including it in a monograph), provided that a reference to the first publication in this journal is maintained.