Investigation of regularities in formation of micro sections at abrasive treatment with submerged jets

Authors

  • O. O. Andіlahay ДВНЗ «Приазовський державний технічний університет», м. Маріуполь, Ukraine

DOI:

https://doi.org/10.31498/2225-6733.27.2013.31524

Keywords:

brass, abrasive machining, grit abrasive cutting process, the process of chip, micro section

Abstract

It was established, that separation of metal during processing due to formation of chips and plastic ousting of metal. This indicates that the analytical representation of the process of treatment with the theory of metal cutting position based on laws governing the transition from the process of plastic deformation of the metal cutting process (chip formation)

Author Biography

O. O. Andіlahay, ДВНЗ «Приазовський державний технічний університет», м. Маріуполь

Доктор технічних наук, професор

References

Проволоцкий А.Е. Струйно-абразивная обработка деталей машин / А.Е. Проволоцкий. – К.: Техника, 1989. – 177 с.

Шманев В.А. Струйно-абразивная обработка деталей ГТД / В.А. Шманев, А.П. Шулепов, А.В. Мещеряков. – М.: Машиностроение, 1995. – 143 с.

Исупов М.Г. Разработка, исследование технологии струйно-абразивной финишной обработки: дис. на соискание научн. степени докт. техн. наук: спец. 05.02.08 «Технология машиностроения» / Исупов Максим Георгиевич. – М.: РГБ, 2007. – 432 с.

Андилахай А.А. Абразивная обработка деталей затопленными струями / А.А. Андилахай. – Мариуполь: ПГТУ, 2006. – 190 с.

Качество поверхности при алмазно-абразивной обработке / Э.В. Рыжов, А.А. Сагарда, В.Б. Ильицкий, И.Х. Чеповецкий. – К.: Наукова думка, 1979. – 244 с.

Downloads

How to Cite

Andіlahay O. O. (2014). Investigation of regularities in formation of micro sections at abrasive treatment with submerged jets. Reporter of the Priazovskyi State Technical University. Section: Technical Sciences, (27), 165–171. https://doi.org/10.31498/2225-6733.27.2013.31524

Issue

No. 27 (2013): Reporter of the Priazovskyi State Technical University. Section: Technical sciences

Section

Mechanical engineering and metal working

License

The journal «Reporter of the Priazovskyi State Technical University. Section: Technical sciences» is published under the CC BY license (Attribution License).

This license allows for the distribution, editing, modification, and use of the work as a basis for derivative works, even for commercial purposes, provided that proper attribution is given. It is the most flexible of all available licenses and is recommended for maximum dissemination and use of non-restricted materials.

Authors who publish in this journal agree to the following terms:

1. Authors retain the copyright of their work and grant the journal the right of first publication under the terms of the Creative Commons Attribution License (CC BY). This license allows others to freely distribute the published work, provided that proper attribution is given to the original authors and the first publication of the work in this journal is acknowledged.

2. Authors are allowed to enter into separate, additional agreements for non-exclusive distribution of the work in the same form as published in this journal (e.g., depositing it in an institutional repository or including it in a monograph), provided that a reference to the first publication in this journal is maintained.