On the question about desulphurization on ASS of low-silicon converter steel, desoxy an aluminium

Authors

  • V. I. Burlakov ДВНЗ «Приазовський державний технічний університет», м. Маріуполь, Ukraine

DOI:

https://doi.org/10.31498/2225-6733.28.2014.33549

Keywords:

optical basicity, low-silicon steel, amount of aluminium, high-basic slag, to the sulfide capacity of slag, oxygen potential, steel teeming ladle, converter slag, coefficient of distributing of sulphur

Abstract

In the article problems are shown at the production of lowsilicon steel and the ways of decision of some problems are presented

Author Biography

V. I. Burlakov, ДВНЗ «Приазовський державний технічний університет», м. Маріуполь

Кандидат технічних наук, доцент

References

Пат. 2166550 Россия, МПК С 21 С 7/064. Способ производства низкокремнистой стали / С.М. Чумаков, А.Ф. Каблуковский, С.И. Ябуров, А.Н. Никулин. – № 99105989/02, заявл. 26.03.1999, опубл. 10.05.2001, Бюлл. №13. – 12 с.

Мельник С.Г. О влиянии сульфидной емкости рафинировочных шлаков на эффективность десульфурации конвертерной стали / С.Г. Мельник // Металл и литье Украины. – 2010. – №11. – С. 17-19.

Зборщик A.M. Технико-экономическая эффективность различных способов внедоменной десульфурации чугуна / A.M. Зборщик, П.С. Харлашин // Черная металлургия. – 2001. – №12. – М.: Черметинформация, 2001. – С. 12-16.

Кудрин В.А. Технология получения качественной стали / В.А.Кудрин, В. Парма. – М.: Металлургия, 1984. – 320 с.

Downloads

How to Cite

Burlakov, V. I. (2014). On the question about desulphurization on ASS of low-silicon converter steel, desoxy an aluminium. Reporter of the Priazovskyi State Technical University. Section: Technical Sciences, (28), 67–74. https://doi.org/10.31498/2225-6733.28.2014.33549

Issue

No. 28 (2014): Reporter of the Priazovskyi State Technical University. Section: Technical sciences

Section

Steel metallurgy

License

The journal «Reporter of the Priazovskyi State Technical University. Section: Technical sciences» is published under the CC BY license (Attribution License).

This license allows for the distribution, editing, modification, and use of the work as a basis for derivative works, even for commercial purposes, provided that proper attribution is given. It is the most flexible of all available licenses and is recommended for maximum dissemination and use of non-restricted materials.

Authors who publish in this journal agree to the following terms:

1. Authors retain the copyright of their work and grant the journal the right of first publication under the terms of the Creative Commons Attribution License (CC BY). This license allows others to freely distribute the published work, provided that proper attribution is given to the original authors and the first publication of the work in this journal is acknowledged.

2. Authors are allowed to enter into separate, additional agreements for non-exclusive distribution of the work in the same form as published in this journal (e.g., depositing it in an institutional repository or including it in a monograph), provided that a reference to the first publication in this journal is maintained.