Research on relation of heat and other fac-tors that influence the gas suspension flow in the gunite lance of the 160t converter
DOI:
https://doi.org/10.31498/2225-6733.29.2014.39106Keywords:
gunite lance, energy potential, gas suspension flowAbstract
The position of a blast tube for supply of gas-powdered mixture and oxygen in the lance with different levels of the outflow. Using such constructive solution gas suspension is heated from the wall of the lance’s body by means of convective heat flow, delivered by the wall to the carrier gas. there is no danger in its heat-up through the separating wall of the line because the temperature tw of the wall of the lance’s body, but increasing of the temperature O2 is recommended. In order not to let the line of the oxygen blast tube in the moment of the 90° turn of the gas-powdered flow wear out. The results of numerical calculations of the equilibrium two-phase flow in the gunite lance with the extraction of the gunite mass at different levels along its length are shown that with such a constructive solution pressure, velocity and density change in leaps and bounds. Also shown that if the body becomes heat exchanger, the energy potential of the gas-dispersed flow significantly changes. It is recommended to perform the pipe of the lance stepped in order to reduce the loss of the compressed gas suspension flowReferences
Sigaryov E.N. Numerical research of thermal-gas-dynamic peculiarities of the converter’s lining shotcreting / E.N. Sigaryov, A.G. Chernyatevich, E.A. Chubina // High Institutes. Black metallurgy. – 2007. – №2. – Р. 60-67. (Rus.)
Voloshin A.I. The mechanics of loose materials’ pneumatic conveying / A.I. Voloshin, B.V. Ponomaryov. – Kyiv: Scientific thought. – 2001. – 521 p. (Rus.)
Development of lance’s apparatus and technology of gas-powder slagging of the 160t converters’ lining JSC «Arselor Mittal Kryvyi Rih» / E.N. Sigaryov and others // Metallurgic and metal mining industry. – 2010. – №7. – Р. 134-137. (Rus.)
Theory and practice of flare shotcreting of the 160t oxygen converters’ lining / P.S. Kharlashin, A.A. Larionov, A.K. Kharin, N.O. Chemeris // New refractory materials. – 2010. – №7. – Р. 5-9. (Rus.)
Mehaelidis E.E. Particles movement in the gas flow. Middle velocity and pressure losses / E.E. Mehaelidis // Theoretical basis of engineer calculations. – 1988. – №1. – Р. 276-288. (Rus.)
Downloads
How to Cite
Issue
Section
License
The journal «Reporter of the Priazovskyi State Technical University. Section: Technical sciences» is published under the CC BY license (Attribution License).
This license allows for the distribution, editing, modification, and use of the work as a basis for derivative works, even for commercial purposes, provided that proper attribution is given. It is the most flexible of all available licenses and is recommended for maximum dissemination and use of non-restricted materials.
Authors who publish in this journal agree to the following terms:
1. Authors retain the copyright of their work and grant the journal the right of first publication under the terms of the Creative Commons Attribution License (CC BY). This license allows others to freely distribute the published work, provided that proper attribution is given to the original authors and the first publication of the work in this journal is acknowledged.
2. Authors are allowed to enter into separate, additional agreements for non-exclusive distribution of the work in the same form as published in this journal (e.g., depositing it in an institutional repository or including it in a monograph), provided that a reference to the first publication in this journal is maintained.
