Analysis of operational indicators and ways to improve the efficiency of transport service of the rolling mills at metallurgical enterprises
DOI:
https://doi.org/10.31498/2225-6733.32.2016.83946Keywords:
rolling mill, transport and freight complex, finished products, the station serving of rolling millAbstract
The article analyzes the transport service of the cold rolling plant. The additional downtime of the railway carriages in the freight areas and at the station serving the plant has been defined. The factors influencing the process in question have been established. It was found that the loading process itself is carried out according to sophisticated transport technology that provides consistent service of significant amount of the rolling rolls freight areas with powerful locomotives and the supply and cleaning of the railway carriages carried out by small groups as well. It was determined that the share of transport operations is more than 55% of the total time of technological operations in the rolling mills transport and freight complexes. It has been stated that the combined actions of all these factors directly influence on operational indicators in the transport and freight complexes of rolling mills when shipping finished products, the volume of transportation increases and that is manifested as the maximum loading of the station capacities, additional downtime of railway carriages and the use of locomotive time. It has been stated that the proper estimation of transport maintenance of rolling mills becomes an important scientific and technical task. That will make it possible to work out a new approach to increasing the efficiency of transport technologies in transport and freight complexesReferences
Маслак А.В. Методика оценки эксплуатационных показателей работы железнодорожных станций в условиях динамики перевозочного процесса / А.В. Маслак // Альтернативные источники энергии в транспортно-технологическом комплексе : проблемы и перспективы рационального использования. – 2015. – Т. 2. – № 2. – С. 791-797.
Маслак А.В. Проблемы переработки вагонопотоков внешнего парка в системе сдвоенных операций металлургических предприятий / А.В. Маслак // Вісник Східноукраїнського національного університету імені Володимира Даля : наук. журн. / Східноукр. нац. ун-т ім. Володимира Даля. – Луганськ : Вид-во СНУ ім. Володимира Даля, 2012. – № 4(175). – С. 199-205.
Сизова Е.И. Исследование закономерностей процесса и разработка метода управления функционированием технологической линии по приёму массового сырья в условиях динамики входящего поездопотока / Е.И. Сизова // Вісник Приазовського державного технічного університету. Секція : Технічні науки : Зб. наук. пр. / ДВНЗ «ПДТУ». – Маріуполь, 2014. – Вип. 29. – С. 230-237.
Парунакян В.Э. Моделирование логистической цепи материалодвижения при отгрузке металлопродукции / В.Э. Парунакян, А.В. Маслак // Подъёмно-транспортная техника. – 2008. – № 3. – С. 3-16.
Парунакян В.Э. К вопросу использования тепловозного парка на промышленном железнодорожном транспорте / В.Э. Парунакян, А.С. Красулин // Захист металургійних машин від поломок : Міжвуз. темат. зб. наук. пр. / ДВНЗ «ПДТУ». – Маріуполь, 2014. – Вип. 16. – С. 49-58.
Downloads
How to Cite
Issue
Section
License
The journal «Reporter of the Priazovskyi State Technical University. Section: Technical sciences» is published under the CC BY license (Attribution License).
This license allows for the distribution, editing, modification, and use of the work as a basis for derivative works, even for commercial purposes, provided that proper attribution is given. It is the most flexible of all available licenses and is recommended for maximum dissemination and use of non-restricted materials.
Authors who publish in this journal agree to the following terms:
1. Authors retain the copyright of their work and grant the journal the right of first publication under the terms of the Creative Commons Attribution License (CC BY). This license allows others to freely distribute the published work, provided that proper attribution is given to the original authors and the first publication of the work in this journal is acknowledged.
2. Authors are allowed to enter into separate, additional agreements for non-exclusive distribution of the work in the same form as published in this journal (e.g., depositing it in an institutional repository or including it in a monograph), provided that a reference to the first publication in this journal is maintained.
