Investigations of the influence of reduction of the sintered ore on the softening temperature range

Authors

  • V. P. Russkih ДВНЗ «Приазовський державний технічний університет», м. Маріуполь, Ukraine
  • S. О. Lipunov ДВНЗ «Приазовський державний технічний університет», м. Маріуполь, Ukraine

DOI:

https://doi.org/10.31498/2225-6733.25.2012.29201

Keywords:

cohesion, blast furnace, melting, softening, porosity, temperature

Abstract

The article describes the theoretical basis of the softening of the sintered ore. This investigations show that softening of the sintered ore depending on the degree of sintered ore recovery. The results show the real process of softening, which occurs in a blast furnace

Author Biographies

V. P. Russkih, ДВНЗ «Приазовський державний технічний університет», м. Маріуполь

Кандидат технічних наук, доцент

S. О. Lipunov, ДВНЗ «Приазовський державний технічний університет», м. Маріуполь

Аспірант

References

Фазовые превращения материалов при доменной плавке / И.Д. Балон, И.В. Буклан, В.Н. Муравьев, Ю.Ф. Никулин. – М. : Металлургия, 1984. – 152 с.

Тарасов В.П. Теория и технология доменного процесса / В.П. Тарасов, П.В. Тарасов. – М. : Интермет Инжиниринг, 2007. – 384 с.

Товаровский И.Г. Эволюция доменного процесса / И.Г. Товаровский, В.П. Лялюк. – Днепропетровск : Пороги, 2000. – 424 с.

Доменное производство : Справочное издание. В 2 томах. / Под ред. Е.Ф.Вегмана. - М. : Металлургия. 1989. – 496 с.

Руды железные, агломераты и окатыши. Метод определения температуры начала размягчения и температурного интервала размягчения. ГОСТ 26517-85. – действителен от 1985 – 04 – 09. – М.: Государственный комитет СССР по стандартам.

Downloads

How to Cite

Russkih, V. P., & Lipunov S. О. (2014). Investigations of the influence of reduction of the sintered ore on the softening temperature range. Reporter of the Priazovskyi State Technical University. Section: Technical Sciences, (25), 35–40. https://doi.org/10.31498/2225-6733.25.2012.29201

Issue

No. 25 (2012): Reporter of the Priazovskyi State Technical University. Section: Technical sciences

Section

Ironmaking

License

The journal «Reporter of the Priazovskyi State Technical University. Section: Technical sciences» is published under the CC BY license (Attribution License).

This license allows for the distribution, editing, modification, and use of the work as a basis for derivative works, even for commercial purposes, provided that proper attribution is given. It is the most flexible of all available licenses and is recommended for maximum dissemination and use of non-restricted materials.

Authors who publish in this journal agree to the following terms:

1. Authors retain the copyright of their work and grant the journal the right of first publication under the terms of the Creative Commons Attribution License (CC BY). This license allows others to freely distribute the published work, provided that proper attribution is given to the original authors and the first publication of the work in this journal is acknowledged.

2. Authors are allowed to enter into separate, additional agreements for non-exclusive distribution of the work in the same form as published in this journal (e.g., depositing it in an institutional repository or including it in a monograph), provided that a reference to the first publication in this journal is maintained.