The modeling of influence alloying elements on point Ms and phase composition of surfacing Fe-Cr-Mn metastable steels
DOI:
https://doi.org/10.31498/2225-6733.27.2013.30636Keywords:
model, alloying, austenite, martensite, point Ms, metastability, phase compositionAbstract
The analysis of influence of alloying elements (Cr, Mn, Si, C) is executed on position of point Ms in the steels of the systems alloying Fe-Cr-Mn. The physical-mathematical model of their influence on point Ms, getting of phase composition and metastable of austenite, on which the development deformation induced martensite transformation at tests and properties of surfacing metal and steels of austenitic, austenitemartensite and martensite-austenite classes depends is developed
References
Лившиц Л.С. Основы легирования наплавленного металла /Л.С. Лившиц, Н.А. Гринберг, Э.Г. Куркумелли. – М.: Машиностроение, 1969. – 188 с.
Разиков М.И. Опыт применения наплавленного металла типа 30Х10Г10Т для наплавки быстроизнашивающихся деталей /М.И. Разиков, И.А. Толстов, Б.А. Кулишенко // Сварочное производство, 1966. - №9. – С. 30-31.
Чейлях А.П. Экономнолегированные сплавы и упрочняющие технологии. – Харьков: ННЦ ХФТИ, 2003. – 212 с.
Филиппов М.А. Стали с метастабильным аустенитом / М.А. Филиппов, В.С. Литвинов, Ю.Р. Немировский. - М.: Металлургия, 1988. – 256 с.
Штейнберг С.С. Термическая обработка стали. - М.: Машгиз, 1950. – 256 с.
Меськин В.С. Основы легирования стали. - М.: Металлургия. - 1964. - 684 с.
Гольдштейн М.И. Специальные стали./ М.И. Гольдштейн, С.В. Грачев, Ю.Г. Векслер. - М.: МИСИС, 1999. - 408 с.
Новиков И.И. Теория термической обработки металлов. - М.: Металлургия, 1979. – 392 с.
Блантер М.Е. Кинетика мартенситного превращения (количественная теория). – в кн.: Диффузия, фазовые превращения, механические свойства металлов и сплавов. Межвузовский сборник. – М.: ВЗМИ, 1978. – Вып. 2, С. 7-25.
Cheiliakh Y. The creation of a new economical (nickel free) powder-like wire for surfacing made of metastable metal, self-strengthened during wear/ Y. Cheiliakh, V. Chidgarev, G. Sheychenko. - 1-st Mediterranean Conference: Heat Treatment and Surface Engineering in the Manufacturing of Metallic Engineering Components. – Sharm El-Sheikh, Egypt, December 1-3, 2009.
Cheiliakh Ya.A. Structure and properties of deposited wear-resistant Fe-Cr-Mn steel with controllable content of metastable austenite / Y.O. Cheiliakh, V.V.Chigarev // The Paton welding Journal / August 2011# 8, pp. 17-21.
Разработка и исследование новой порошковой ленты для наплавки колес мостовых кранов / Л.С. Малинов, А.П. Чейлях, Е.Я. Харланова и др. // Сварочное производство.- 1995.- № 10.- С. 22-25.
Downloads
How to Cite
Issue
Section
License
The journal «Reporter of the Priazovskyi State Technical University. Section: Technical sciences» is published under the CC BY license (Attribution License).
This license allows for the distribution, editing, modification, and use of the work as a basis for derivative works, even for commercial purposes, provided that proper attribution is given. It is the most flexible of all available licenses and is recommended for maximum dissemination and use of non-restricted materials.
Authors who publish in this journal agree to the following terms:
1. Authors retain the copyright of their work and grant the journal the right of first publication under the terms of the Creative Commons Attribution License (CC BY). This license allows others to freely distribute the published work, provided that proper attribution is given to the original authors and the first publication of the work in this journal is acknowledged.
2. Authors are allowed to enter into separate, additional agreements for non-exclusive distribution of the work in the same form as published in this journal (e.g., depositing it in an institutional repository or including it in a monograph), provided that a reference to the first publication in this journal is maintained.
