Automation of calculation of fastening of non-standard freights on sea vessels
DOI:
https://doi.org/10.31498/2225-6733.30.2015.52646Keywords:
vessel, moment force, cross and longitudinal forces, safety, freight, lashings, slidingAbstract
Correct positioning and fastening of freights are important safety conditions of navigation. Unreliable positioning and fastening of freights results in shipwreck and is the reason for injuries and losses of human lives both in the sea and during loading and unloading. To solve the above-mentioned problems, the International Maritime Organization publishes manuals in the form of either the Assembly resolutions, or the circulars approved by Maritime Safety Committee. The correct definition of necessary quantity of lashings and their positioning has the greatest impact on safe fastening of freights. The sea being rough, the vessel is accelerated both in longitudinal, and vertical and prevailing cross directions. The forces created by these accelerations generate the majority of the problems in fastening. The order of calculations of the force moments and forces acting upon the freights being shipped by sea vessels has been shown in the article. To know the proper number of lashings the calculations of the forces acting upon the freights being shipped as compared with the forces holding the freights and taking into account the strength, the number and the fastening angle of the lashings must be made. Оption of realization of algorithm of calculation with use of the а computer program to make these calculations has been offered. Some recommendations so that the program could be used by the management of the vessel, the surveyor companies and technologists of the port have been given as well as an example of such a calculationReferences
Снопков В.И. Технология перевозки грузов морем: учебник для вузов. 3-е изд., перераб. и доп. / В.И. Снопков. – Санкт-Петербург : АНО НПО «Мир и Семья». – 2001. – 560 с.
Кодекс безопасной практики размещения и крепления груза. – М. : В/О «Мортехинформреклама», 1992. – 116 с.
Поправки и дополнение к Кодексу безопасной практики размещения и крепления груза (Кодекс РГК). – Санкт-Петербург : АОЗТ ЦНИИМФ, 1995. – 27 с.
Аксютин Л.Р. Грузовой план судна / Л.Р. Аксютин. – Одеса : ЛАТСТАР, 1999. – 139 с.
Downloads
How to Cite
Issue
Section
License
The journal «Reporter of the Priazovskyi State Technical University. Section: Technical sciences» is published under the CC BY license (Attribution License).
This license allows for the distribution, editing, modification, and use of the work as a basis for derivative works, even for commercial purposes, provided that proper attribution is given. It is the most flexible of all available licenses and is recommended for maximum dissemination and use of non-restricted materials.
Authors who publish in this journal agree to the following terms:
1. Authors retain the copyright of their work and grant the journal the right of first publication under the terms of the Creative Commons Attribution License (CC BY). This license allows others to freely distribute the published work, provided that proper attribution is given to the original authors and the first publication of the work in this journal is acknowledged.
2. Authors are allowed to enter into separate, additional agreements for non-exclusive distribution of the work in the same form as published in this journal (e.g., depositing it in an institutional repository or including it in a monograph), provided that a reference to the first publication in this journal is maintained.
