Plazma modification of threading tools
DOI:
https://doi.org/10.31498/2225-6733.34.2017.105667Keywords:
plasma, hardening, heat source, model, tool, wedgeAbstract
A comprehensive model of the threading tool hardening on high-speed plasma heating has been presented as well as the mathematical description of the heating process. The reproduction of the model by means of computer simulation, based on the use of the finite elements method, including structural and physical parameters of the tool has been offered. The heat distribution in the heat-affected zone, and the relationship that makes it possible to determine the temperature at any point of the body, bringing the simulation results closer to the actual physical characteristics of the process have been shown. The analysis conducted in this article shows the prospects of using surface hardening methods to improve performance of thread-cutting tools. However, due to the complex profile of the working surface of the tools, application of any hardening method involves difficulties. On the strength of the above-said, with due regard to the established requirements for geometrical parameters of the thread-cutting tools and their loading conditions, as well as well-known recommendations for other types of tools, the technological processes for plasma processing of various types of thread-cutting tools have been developed. In developing the technology of plasma modification it is very important to select the optimum mode of heating, which ensures the formation of the modified zones of required size. This problem is solved by means of the analysis of thermal fields in the tool during plasma heating. The experience of using plasma hardening shows that the thermal cycle of heating and cooling materials can be controlled by varying such parameters as arc current and the speed of the plasma torch movement at a constant optimum level of the other parameters (plasma gas flow and the cooling water, the distance of the nozzle exit to the surface being machined)References
Список использованных источников (ГОСТ):
Грановский В.И. Резание металлов / В.И. Грановский, В.Г. Грановский. – М. : Высшая школа, 1985. – 304 с.
Родин П.Р. Металлорежущие инструменты / П.Р. Родин. – М. : Высшая школа, 1974. – 400 с.
Иноземцев Г.Г. Проектирование металлорежущих инструментов / Г.Г. Иноземцев. – М. : Машиностроение, 1984. – 272 с.
Кургузов С.А. Исследование влияния дробеструйной обработки резьбообразующего инструмента / С.А. Кургузов, Т.Ш. Галиахметов // Известия Тульского государственного университета : Серия «Инструментальные и технологические системы». – 2006. – Вип. 2. – С. 157-161.
Геранюшкин А.В. Особенности эксплуатации твердосплавных резьбонарезных пластин и методы повышения их надежности / А.В. Геранюшкин // Мир техники и технологий. – 2008. – № 2. – С. 34-35.
Табаков В.П. Разработка многослойных покрытий для токарных резьбовых резцов / В.П. Табаков, Д.И. Сагитов // Упрочняющие технологии и покрытия. – 2013. – № 5. – C. 42-47.
Справочник по технологии лазерной обработки / В.С. Коваленко и др.. – К. : Техніка, 1985. – 167 с.
Самотугин С.С. Плазменное упрочнение инструментальных материалов / С.С. Самоту-гин, Л.К. Лещинский. – Донецк : Новый мир, 2003. – 338 с.
Рыкалин Н.Н. Расчеты тепловых процессов при сварке / Н.Н. Рыкалин. – М. : Машгиз, 1951. – 296 с.
Математическое описание процессов распространения тепла в инструменте сложной формы от действия плазменного источника нагрева / С.С. Самотугин и др. // Вестник Инженерной академии наук Украины. – 2004. – № 1. – C. 101-107.
Самотугин С.С. Моделирование тепловых процессов при плазменном поверхностном упрочнении тонколезвийного почвообрабатывающего инструмента / С.С. Самотугин, В.А. Мазур, Д.С. Литвиненко // Вестник СевНТУ : Серия «Машиноприборостроение и транспорт». – 2012. – Вип. 129. – C. 194-198.
References:
Granovskiy V.I., Granovskiy V.G. Rezanie metallov [Metalcutting]. Moscow, Vuschay shkola Publ., 1985. 304 р. (Rus.)
Rodin P.R. Metalorejuschie instrumentu [Cutting tools]. Moscow, Vuschay shkola Publ., 1974. 407 р. (Rus.)
Inozemtsev G.G. Proektirovanie metalorejuschieh instrumentov [Engineering cutting tools]. Moskow, Mashunostroinie Publ., 1984. 272 р. (Rus.)
Kurgusov S.A., Galiahmetov T.S. Issledovanie vliyaniya drobestruinoi obrabotki rezboobrazuuschego instrumenta [Reseach influence of blasting threading tools]. Izvestiya Tulskogo gosudarstvenogo universiteta: Seriya «Instrymentalnue i tehnologicheskie sistemu» – News of Tula State University: Series «Tools and technology system», 2006, no. 2, pp. 156-161. (Rus.)
Geranuskin A.V. Osobenosti ekspluatazii tverdosplavnuh resbonareznuh plastin i metodu ih nadegnosti [Features of operation of carbide threading inserts and methods to improve their reliability]. Mir tehniki I tehnologyi – The world of engineering and technology, 2008, no. 2, pp. 34-35. (Rus.)
Tabakov V.P., Sagitov D.I. Razrabotka mnogosloyinuh pokrutii dlya tokarnuh rezbovuh rez-cov [The development of multilayer coatings for turning threaded cutters]. Uprochnyauschie technologii – Hardening and coating technology, 2013, no. 5, pp. 42-47. (Rus.)
Kovalenko V.S., Kotlyarov V.P., Dyatel V.P., Golovko L.F., Romanenko V.V. Spravochnik po techologii lazernoi obrabotki [Handbook of laser processing technology]. Kiev, Technika Publ., 1985. 407 p. (Rus.)
Samotugin S.S., Leschinskiy L.K. Plazmenoe uprochnenie instrumentalnuh materialov [Plaz-ma hardening of tools material]. Donetsk, Novui mir Publ., 2003. 338 p. (Rus.)
Rukalin N.N. Raschetu teplovuh prozcesov pri svarke [Calculations of thermal processes in welding]. Moscow, Mashgiz Publ., 1951. 296 p. (Rus.)
Samotugin S.S., Nesterov O.U., Mazur V.A., Ananeva V.V. Matematicheskoe opisanie proz-cesov raspostranenie tepla v instrumente slognoi formu oy deistviya plazmenogoistochnika nagreva [The mathematical description of the processes of heat distribution in the tool of complex shape from the action of the plasma heat source]. Vestnik ingenernuh nauk Ukrainu – Journal of Engineering Academy of Sciences of Ukraine, 2004, no. 1, pp. 101-107. (Rus.)
Samotugin S.S., Mazur V.A., Litvinenko D.S. Modelirovanie teplovuh proczesov pri plaz-menon poverhnostnom uprochnenii tonkolezviinogo pochvoobrabatuvaushego instrumenta [Modeling of thermal processes at the plasma surface hardening thin blade tillage tool]. Vestnik SevNTU: Seriya «Mashunopriborostroinie i transport» – Journal of the Sevastopol National Technical University «Mechanical Instrumentation and Transport», 2012, no. 129, pp. 194-198. (Rus.)
Downloads
How to Cite
Issue
Section
License
The journal «Reporter of the Priazovskyi State Technical University. Section: Technical sciences» is published under the CC BY license (Attribution License).
This license allows for the distribution, editing, modification, and use of the work as a basis for derivative works, even for commercial purposes, provided that proper attribution is given. It is the most flexible of all available licenses and is recommended for maximum dissemination and use of non-restricted materials.
Authors who publish in this journal agree to the following terms:
1. Authors retain the copyright of their work and grant the journal the right of first publication under the terms of the Creative Commons Attribution License (CC BY). This license allows others to freely distribute the published work, provided that proper attribution is given to the original authors and the first publication of the work in this journal is acknowledged.
2. Authors are allowed to enter into separate, additional agreements for non-exclusive distribution of the work in the same form as published in this journal (e.g., depositing it in an institutional repository or including it in a monograph), provided that a reference to the first publication in this journal is maintained.
