The problem of control structure selection process of production and future directions its decision
DOI:
https://doi.org/10.15587/1729-4061.2011.1342Keywords:
Рroduction process, structural technological diagramAbstract
Reviews the current state of problems of management of a choice of optimum structures of the production processes of machining and offers one of the approaches to its solutionReferences
- Соловьев В.К. Методология автоматизированного проектирования операционных технологических процессов изготовления объектов точного машиностроения [Текст] / В.К. Соловьев. // Технология машиностроения. 2004. № 4. С.60 62.
- СултанЗаде Н.М. Метод оптимизации структурной компоновки автоматических линий [Текст] / Н.М. СултанЗаде // Системы управления станками и автоматическими линиями: сб.науч.тр. М.: ВЗМИ, 1982. С. 9 13.
- Белоусов А.П. Проектирование автоматических линий: Учебное пособие для маш.-строит. спец. вузов. [Текст] / А.П. Белоусов, А.И. Дащенко М.: В. шк., 1983. 328с.
- Козлова Е.В. Модифицированный метод структурного распараллеливания В.А. Костенко для линейных и разветвляющихся участков схемы технологического процесса сборочного производства. [Текст] / Е.В. Козлова, В.А.Когутенко // Вестник СевГТУ: Автоматизация процессов и управление, Севастополь: Издательство СевНТУ, 2003, С.107 - 112.
- Скатков А.В. Информационная модель производственного процесса с элементами принятия об управлении технологическими маршрутами в механообработке [Текст] / А.В.Скатков, Е.В.Козлова //«Восточно-Европейский журнал передовых технологий» Харьков: Изд. НПП «Тех. Ц.», 2005. № 4, С.81-91.
- Козлова Е.В. Интегрированная система поддержки принятия решений по управлению структурами производственных процессов [Текст] / Е.В.Козлова //«Восточно-Европейский журнал передовых технологий» Харьков: Изд. НПП «Тех. Ц.», 2011. № 3, С.45-50.
Downloads
How to Cite
Issue
Section
License
Copyright (c) 2014 Елена Вадимова Козлова, Юрий Николаевич Щепин
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
