Achievement of partial invariance of gyroscope of direction at the determined tossing
DOI:
https://doi.org/10.15587/1729-4061.2011.1437Keywords:
Asynchronous three-componental rolling, three-sedate a gyroscopeAbstract
The analysis of efficiency of two channel schemes autoindemnifications of influence of external hindrances on the basis of direct use of a principle of Petrov is carried out. Definition of value defined in time the setting of free gyroscope at three-componental asynchronous and synchronous rolling of the basisReferences
- Одинцов, А.А., Карачун, В.В. Об уменьшении погрешностей гиростабилизаторов от перекрестных связей [Текст] / А.А.Одинцов, В.В. Карачун // Прикл. механика. -1973.-IX, №10. –С.111-118.
- Автокомпенсация инструментальных погрешностей гиросистем [Текст]: моногр. / М.И. Малтинский, И.М. Окон, С.М. Зельдович, Я.Г. Остромухов. – Л.: Судостроение, 1976. – 255с.
- Теория инвариантности автоматически регулируемых и управляемых систем [Текст] / В.С. Кульбакин. –М.: Изд-во АН СССР, 1961. –Т.1. -459с.
- Одинцов, А.А. Метод автокомпенсации влияния внешних помех, действующих на гироскопы и маятниковые акселерометры [Текст] /А.А. Одинцов// Автоматика и приборостроение – К.: Техніка, 1973. – С. 87-94.
- Каргу, Л.И. Гироскопическая система с реверсируемым кинетическим моментом [Текст] / Л.И. Каргу // Изв. Высших уч. зав. СССР. Приборостроение. 1964. – Т. 7. - № 6. – С. 65-70.
- Ильчанинов, В.П. Влияние принудительного вращения карданова подвеса на движение астатического гироскопа [Текст] / В.П. Ильчанинов// Изв. Высших уч. зав. СССР. Приборостроение. - 1970. – Т. 13, № 12. – С. 66-70.
- Карачун, В.В. Гироскоп направления с двух канальной схемой автокомпенсации влияния помех при нерегулярной качке основания [Текст] / В.В. Карачун // Влияние вибрации, линейных ускорений и вращений основания на поведение гироскопических устройств. – Томск: Изд-во ТПИ им. С.М. Кирова. -1981. –С13-17.
Downloads
How to Cite
Issue
Section
License
Copyright (c) 2014 Владимир Владимирович Карачун, Виктория Николаевна Мельник
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.