Grounding parameters of flexible element in drive mechanism with combined kinematic vibroexcitation

Authors

  • Ігор Павлович Паламарчук Vinnytsia National Agricultural University Sonyachna 3, Vinnytsia, Ukraine, 21008, Ukraine
  • Владислав Ігорович Паламарчук Vinnytsia National Agricultural University Sonyachna 3, Vinnytsia, Ukraine, 21008, Ukraine
  • Вадим Іванович Драчишин Vinnytsia National Agricultural University Sonyachna 3, Vinnytsia, Ukraine, 21008, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2013.18826

Keywords:

vibroexciter, motion dynamics, kinematic drive, vibrating conveyor, elastic system

Abstract

Transport-technological machines due to combining several op­erations in one production cycle, providing treatment continuity and easy adherence to production lines are in wide demand in the fields of agro-industrial complex. The use of vibrating conveyor machines adds potential capabilities of technological action intensification to the noted features. Thus, the main problems remain, such as reduc­tion of dynamic loads on supporting units and system balancing.

To solve such problems, the constructive and technological mea­sures are substantiated in this research paper to reduce the dynamic loads on supporting units of the drive mechanism by defining the basic criteria of assessing the elastic system of technological machine and obtaining their analytical expressions, combining the elements of kinematic and force vibroexcitation. Calculation of the kine­matic characteristics of mechanical vibroexciters of technological machines allows determining the main dependencies of parameters of transport-technological or conveyor vibrating systems, that is important in their design and construction of the elastic system of vibration equipment.

Based on the analysis of modern equipment of vibration tech­nological and transport-technological machines, the classification of the main structural elements of their elastic system was developed. The effect of additional elastic component from the deformed trans­porting element in the design of vibroexciters was justified by the example of calculation of conveyor vibrating machine.

Author Biographies

Ігор Павлович Паламарчук, Vinnytsia National Agricultural University Sonyachna 3, Vinnytsia, Ukraine, 21008

Professor

Department of processes and equipment of food processing industries

Владислав Ігорович Паламарчук, Vinnytsia National Agricultural University Sonyachna 3, Vinnytsia, Ukraine, 21008

Postgraduate

Department of processes and equipment of food processing industries

Вадим Іванович Драчишин, Vinnytsia National Agricultural University Sonyachna 3, Vinnytsia, Ukraine, 21008

Postgraduate

Department of processes and equipment of food processing industries

References

  1. Ананьев, И.В. Справочник по расчету собственных колебаний упругих систем / И.В. Ананьев. –М.: Гостехиздат, 1946. – 223 с.
  2. Берник, П.С. Конвеєрні вібраційні машини для оздоблювально-зміцнювальної обробки / П.С. Берник, І.П. Паламарчук. За ред. П.С. Берника. – К.: Вища школа, 1996. – 237 с.
  3. Берник, П.С. Выбор рациональной схемы механического вибровозбудителя для конвейерной вибрационной машины с эластичной направляющей / П.С. Берник, Л.П. Середа, И.П. Паламарчук // Вибрации в технике и технологиях. – 1995.–№ 2. –С.15-20.
  4. Дель, Г.Д. Технологическая механика / Г.Д. Дель – М.: Машиностроение, 1978. – 174 с.
  5. Паламарчук, І.П. Обґрунтування основних робочих параметрів механічного віброприводу машини з гнучким контейнером для механічної обробки харчової сировини / І.П. Паламарчук, Т.Г. Місюра // Наукові праці національного університету харчових технологій.–2007.–№1.–С. 53 – 56.
  6. Bachmann, D. Bewegungsorgane in Schwingmühlen mit trockner mahlk organe füllung / D. Bachmann// Z.V.D.I-Beihert.– 1940.– № 2, C. 19-23.
  7. Bachmann, D. Entwicklung der Schwingmühlen / D. Bachmann // Die chemische Technik.– 1942.–№18, C. 11-16.
  8. Josselin de Jong. Static and Kinematics in the bailable zone of a granular material / Josselin de Jong // Delft.-Waltman, 1959.
  9. Raasch, J. Zur Mechanik der Schwingmühlen / J. Raasch // Chemie-Jngr-Tech.– 1962.– №2.
  10. Rose, H. Hochleistungs-Schwingmühlen / H.E. Rose // Chemie-Jngr-Tech.– 1962.– №34.
  11. Ananev, I. (1946). Handbook for calculation of natural oscillations of elastic systems. Moscow: Gostekhizdat, 223.
  12. Bernik, P., Palamarchuck, I. (1996). Conveyor Vibratory finishing machine - firming treatment. Kyiv: High School, 237.
  13. Bernik, P., Sereda, L., Palamarchuck, I. (1995). Choosing a rational scheme of mechanical vibration exciter for the conveyor machines with flexible rail. Vibrations in engineering and technology, 2, 15-20.
  14. Del, G. (1978). Technological mechanics. Moscow: Mechanical Engineering, 174.
  15. Palamarchuck, I., Misyura, T. (2007). Justification of the main operating parameters of Mechanical Vibration machine with a flexible container for machining raw food. Proceedings of the National University of Food technology, 1, 53 - 56.
  16. Bachmann, D. (1940). Locomotor system in vibration mills with dry grinding media filling bodies. Z.V.D.I-Beihert, 2, 19-23.
  17. Bachmann, D. (1942). Development of vibration mills. The chemical technology, 18, 11-16.
  18. Josselin de Jong (1959). Static and Kinematics in the bailable zone of a granular material. Delft.-Waltman.
  19. Raasch, J. (1962). The mechanics of the swing mills. Chemistry JNGR-tech,2.
  20. Rose, H. (1962). High Performance Mixer. Chemistry JNGR-tech, 34.

Downloads

Published

2013-12-12

How to Cite

Паламарчук, І. П., Паламарчук, В. І., & Драчишин, В. І. (2013). Grounding parameters of flexible element in drive mechanism with combined kinematic vibroexcitation. Eastern-European Journal of Enterprise Technologies, 6(7(66), 25–30. https://doi.org/10.15587/1729-4061.2013.18826

Issue

Vol. 6 No. 7(66) (2013): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Ігор Павлович Паламарчук, Владислав Ігорович Паламарчук, Вадим Іванович Драчишин

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.