Determination of regularities of heat resistance under flame action on wood wall with fire-retardant varnish
DOI:
https://doi.org/10.15587/1729-4061.2020.210009Keywords:
protective agents, weight loss, surface treatment, wood burnoutAbstract
An analysis of fire-retardant materials for wooden building structures is carried out and the need to develop reliable methods for studying the process of ignition and flame propagation on the surface of a building structure, necessary for creating new types of fire-retardant materials, is found. Therefore, it is necessary to determine the conditions for forming a thermal conductivity barrier and find a mechanism for inhibiting heat transfer to the material. In this regard, a computational and analytical method for determining thermal conductivity when using a fire-retardant varnish as a coating is developed, which allows assessing the coefficient of thermal conductivity under high temperature action. According to experimental data and theoretical dependences, the coefficient of thermal conductivity of the fire-retardant coked foam layer of 0.36 W/(m∙K) is calculated, which, accordingly, ensures the heat resistance of wood.
As a result of research, it is proved that the process of heat insulation of a wooden structure consists in the formation of soot-like products on the surface of natural combustible material. This made it possible to determine the conditions for fireproofing wood by forming a thermal conductivity barrier during the decomposition of varnish into foamed coke. Experimental studies confirmed that a sample of fireproof wood withstood the temperature effect of the heat flux for 900 s. The maximum possible temperature penetration through the coating is evaluated. It is found that under the temperature effect on the sample, which significantly exceeds the ignition temperature of wood, on the unheated surface of the sample, this value did not exceed 180 °C. Thus, there is reason to assert the possibility of directional regulation of wood fire protection processes using fire-retardant coatings that can form a protective layer on the material surface that inhibits wood burnoutReferences
- Tsapko, Y., Kyrycyok, V., Tsapko, A., Bondarenko, O., Guzii, S. (2018). Increase of fire resistance of coating wood with adding mineral fillers. MATEC Web of Conferences, 230, 02034. doi: https://doi.org/10.1051/matecconf/201823002034
- Tsapko, Y., Bondarenko, O. P., Tsapko, A. (2019). Research of the Efficiency of the Fire Fighting Roof Composition for Cane. Materials Science Forum, 968, 61–67. doi: https://doi.org/10.4028/www.scientific.net/msf.968.61
- Tsapko, Y. V., Yu Tsapko, A., Bondarenko, O. P., Sukhanevych, M. V., Kobryn, M. V. (2019). Research of the process of spread of fire on beams of wood of fire-protected intumescent coatings. IOP Conference Series: Materials Science and Engineering, 708, 012112. doi: https://doi.org/10.1088/1757-899x/708/1/012112
- Krüger, S., Gluth, G. J. G., Watolla, M.-B., Morys, M., Häßler, D., Schartel, B. (2016). Neue Wege: Reaktive Brandschutzbeschichtungen für Extrembedingungen. Bautechnik, 93 (8), 531–542. doi: https://doi.org/10.1002/bate.201600032
- Xiao, N., Zheng, X., Song, S., Pu, J. (2014). Effects of Complex Flame Retardant on the Thermal Decomposition of Natural Fiber. BioResources, 9 (3). doi: https://doi.org/10.15376/biores.9.3.4924-4933
- Gaff, M., Kačík, F., Gašparík, M., Todaro, L., Jones, D., Corleto, R. et. al. (2019). The effect of synthetic and natural fire-retardants on burning and chemical characteristics of thermally modified teak (Tectona grandis L. f.) wood. Construction and Building Materials, 200, 551–558. doi: https://doi.org/10.1016/j.conbuildmat.2018.12.106
- Zhao, P., Guo, C., Li, L. (2018). Flame retardancy and thermal degradation properties of polypropylene/wood flour composite modified with aluminum hypophosphite/melamine cyanurate. Journal of Thermal Analysis and Calorimetry, 135 (6), 3085–3093. doi: https://doi.org/10.1007/s10973-018-7544-9
- Cirpici, B. K., Wang, Y. C., Rogers, B. (2016). Assessment of the thermal conductivity of intumescent coatings in fire. Fire Safety Journal, 81, 74–84. doi: https://doi.org/10.1016/j.firesaf.2016.01.011
- Nine, M. J., Tran, D. N. H., Tung, T. T., Kabiri, S., Losic, D. (2017). Graphene-Borate as an Efficient Fire Retardant for Cellulosic Materials with Multiple and Synergetic Modes of Action. ACS Applied Materials & Interfaces, 9 (11), 10160–10168. doi: https://doi.org/10.1021/acsami.7b00572
- Carosio, F., Alongi, J. (2016). Ultra-Fast Layer-by-Layer Approach for Depositing Flame Retardant Coatings on Flexible PU Foams within Seconds. ACS Applied Materials & Interfaces, 8 (10), 6315–6319. doi: https://doi.org/10.1021/acsami.6b00598
- Shi, X.-H., Chen, L., Zhao, Q., Long, J.-W., Li, Y.-M., Wang, Y.-Z. (2020). Epoxy resin composites reinforced and fire-retarded by surficially-treated carbon fibers via a tunable and facile process. Composites Science and Technology, 187, 107945. doi: https://doi.org/10.1016/j.compscitech.2019.107945
- Md Nasir, K., Ramli Sulong, N. H., Johan, M. R., Afifi, A. M. (2018). An investigation into waterborne intumescent coating with different fillers for steel application. Pigment & Resin Technology, 47 (2), 142–153. doi: https://doi.org/10.1108/prt-09-2016-0089
- Erdoğan, Y. (2016). Production of an insulation material from carpet and boron wastes. Bulletin of the Mineral Research and Exploration, 152, 197–202. doi: https://doi.org/10.19111/bmre.74700
- Zhang, H., Li, Y.-M., Tao, W.-Q. (2017). Theoretical accuracy of anisotropic thermal conductivity determined by transient plane source method. International Journal of Heat and Mass Transfer, 108, 1634–1644. doi: https://doi.org/10.1016/j.ijheatmasstransfer.2017.01.025
- Potter, M. C. (2019). Engineering analysis. Springer. doi: https://doi.org/10.1007/978-3-319-91683-5
- Tsapko, Y., Zavialov, D., Bondarenko, O., Marchenco, N., Mazurchuk, S., Horbachova, O. (2019). Determination of thermal and physical characteristics of dead pine wood thermal insulation products. Eastern-European Journal of Enterprise Technologies, 4 (10 (100)), 37–43. doi: https://doi.org/10.15587/1729-4061.2019.175346
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 Yuriy Tsapko, Vasyl Lomaha, Аleksii Tsapko, Serhii Mazurchuk, Oleksandra Horbachova, Denys Zavialov
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
