Визначення технологічних особливостей модифікації поверхні подрібненого вулканізату на різному обладнанні
DOI:
https://doi.org/10.15587/1729-4061.2009.22356Keywords:
crushed vulcanizate, rubber mixer, two-phase modification, compositeAbstract
The technological features of modification of the crushed vulcanizate (CV) are considered in the different type of equipment: mixer rollers and heated periodic closed rubber mixer . The technological aspects of making of mixtures are studied from twophase updating CV. Is shown advantages of application of amino compound connections and compositeof «Plastol» for treatment of surface of CV in rubber mixer is more effective. Developed and the methods of modification described in the floor can be the use in a production
References
- Мікульонок І.О. Основні методи використання гумовмісних відходів/ І.О. Мікульонок // Хімічна промисловість України. – 2001. - №5. - С.53-58.
- Гуль Е.В., Орловский П.Н., Шохин И. А. Регенерация и другие методы переработки старой резины. – М.: Химия,1966. - 140с.
- Кошелев Ф.Ф., Корнев А.Е., Буканов А.М. Общая технология резины. – М.: Химия, 1978.-528 с.
- Голуб Л.С. Застосування композитів на основі фенолформальдегідних смол для обробки поверхні подрібненого вулканізату / Л.С.Голуб, Ю.І.Захаров, Т.В.Данилейко, Ю.М.Ващенко // Вопросы химии и химической технологии. – 2004. - №4. – С. 120-123.
- Мусина Л.Н. Химическая модификация резиновой крошки продукта бародеструкционной переработки изношенных шин / Л.Н. Мусина, Т.В. Куценко // Экологические проблемы Западного Урала, Пермь: Пермский гос. техн. ун-т, 2001. – С.39-40.
- Грицак О.А. Влияние способов обработки измельченного вулканизата на свойста эластомерных композиций./ О.А.Грицак, Ю.И.Захаров, Ю.Н.Ващенко // Вопр. химии и химической технологии. – 2008. – №6.-С.46-50.
- Рябінін Д.Д. Термомеханічний метод регенерації гуми / Д.Д. Рябінін, В.С. Рахманов // Хімічна промисловість. – 1961. – № 3 – С.15-18
- Керча Ю.Ю. Структурно-химическая модификация эластомеров / Ю.Ю. Керча, З.В.Онищенко, В.С. Кутянина, Л.А. Шелковникова // Киев: Наукова думка, 1986 – 232с.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Ю. М. Ващенко, О. О. Грицак
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
