Support system of making decision on perfection of the construction of vehicles

Authors

  • Василь Олександрович Гелло Факультет мехатроніки транспортних засобів Харківський національний автомобільно-дорожний університет, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2010.2549

Keywords:

support system of making decision, vehicles, perfection, strategy, factors, program complex, brake controls

Abstract

Informative and formal task definition of development of specialized support system of making decision on perfection of a construction of automobile vehicles is considered, the generalized algorithm of the decision of the task is resulted and program implementation of the offered algorithm on an example of the unit of optimization of a construction of brake system of wheel machines is described.

References

  1. Халл Э., Джексон К., Дик Д. Разработка и управление требованиями. Практическое руководство пользователя. Второе издание – М.: «Telelogic-Press», 2005. – 240c.
  2. CarSIM 7 Theoretical Guide / Published by Mechanical Simulation Systems, Inc., 2007.
  3. modeFRONTIER Learning E-Course / Esteco s.r.l, 2009.
  4. В.И. Лямец, А.Д. Тевяшев. Системный анализ. Вводный курс. / 2-е издание, переработанное и дополненное – Х.: ХНУРЭ, 2003 – 449с.
  5. Раймпель Й. Шасси автомобиля: Элементы подвески / пер. с нем. А.Л. Карпухина; под ред. Г.Г. Гридасова. М.: Машиностроение, 1987. – 288с.
  6. Thomas D. Gillespie. Fundamentals of Vehicle Dynamics. / Published by Society of Automobile Engineers (SAE), Inc., 2004. – 294p.

Downloads

How to Cite

Гелло, В. О. (2012). Support system of making decision on perfection of the construction of vehicles. Eastern-European Journal of Enterprise Technologies, 1(4(43), 28–31. https://doi.org/10.15587/1729-4061.2010.2549

Issue

Vol. 1 No. 4(43) (2010): Information technology

Section

Information technology

License

Copyright (c) 2014 Василь Олександрович Гелло

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.