Research of structure modification of forsterite powder by fluorine-ions
DOI:
https://doi.org/10.15587/1729-4061.2010.2598Keywords:
sol-gel method, ceramic powder, forsterite formationAbstract
The modified forsterite powder by an ion F- sol gel method is received. Partial replacement of O2- ions on F- in powder structure is established. It is shown the higher degree of H2SiF6 alloying in comparison with MgF2 at the expense of chemical interaction of components in a liquid phase.References
- Kazakov A., Komarneni S., Roj R. Preparation and Dentification of Forsterite (Mg2SiO4) bi Nanocomposite Sol-Gel Processing // Materials Latters. 1990. V. 9. № 10. P. 405-409.
- Попова О.Н. Фазовый состав и морфология золь-гель порошка форстерита. // Успехи в химии и хим. технол. 2005. 19. №8. С. 69-72.
- Карякин Л.И. Петрография огнеупоров. Харьков: Металлургиздат, 1962. 314 с.
- Пат. 7208434 США, МПК С 04 В 35/20 (2006.01), С 04 В 35/465 (2006.01).
- Стоцкая О.А., Подденежный Е.Н., Бойко А.А., Богатырев В.М., Борисенко Н.В., Ясюкевич А.С., Мандрик А.В. Хромсодержащие нанокерамические порошки на основе форстерита и мулита – перспективные материалы для формирования активных лазерных сред и люминофоров // Перспективные материалы. 2006. №6. С. 34-39.
- Вахула Я.И., Луцюк И.В., Борщишин И.Д. Влияние величины рН и концентрации реагентов на гелеобразование магнийсиликатных коллоидных растворов // ЖПХ, 2008. Т.81. Вып.5. С. 872-874.
- Адрианов Н.Т., Стрельникова С.С., Дягилец С.М., Федорова С.Ю. Влияние природы исходных компонентов на синтез форстерита, полученного золь-гель методом // Стекло и керамика. 2002. №6. С. 16-19.
- Уманский Я.С., Скаков Ю.А., Иванов А.Н., Расторгуев Л.Н. Кристаллография, рентгенография и электронная микроскопия. М.: Металлургия, 1982. 632 с.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Я.И. Вахула, И.Д. Борщишин, И.В. Луцюк
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.